Jump to content

v-rtc

Expert Member
  • Gesamte Inhalte

    2.006
  • Registriert seit

  • Letzter Besuch

Beiträge erstellt von v-rtc

  1. !
    interface FastEthernet0
    !
    interface FastEthernet1
    !
    interface FastEthernet2
    !
    interface FastEthernet3
    !
    interface Vlan1
    description VPN_XXX
    ip address 10.10.10.10 255.255.255.240
    ip verify unicast reverse-path
    no ip redirects
    no ip unreachables
    no ip proxy-arp
    ip mtu 1380
    ip nat inside
    ip virtual-reassembly
    ip route-cache flow
    ip tcp adjust-mss 1380
    ip policy route-map clear-df-bit-map
    crypto ipsec client ezvpn crws-client inside
    !
    interface Dialer0
    description $FW_INSIDE$
    mtu 1400
    ip address negotiated
    no ip redirects
    no ip unreachables
    no ip proxy-arp
    ip nat outside
    ip virtual-reassembly
    encapsulation ppp
    ip route-cache flow
    dialer pool 1
    dialer remote-name redback
    dialer-group 1
    no cdp enable
    ppp authentication pap chap callin
    ppp chap hostname t-online-com/X9X@t-online-com.de
    ppp chap password 7 111
    ppp pap sent-username t-online-com/X9X@t-online-com.de password 7 111
    ppp ipcp dns request
    ppp ipcp wins request
    crypto ipsec client ezvpn crws-client
    !
    ip forward-protocol nd
    ip route 0.0.0.0 0.0.0.0 Dialer0 permanent
    !
    !
    ip http server
    ip http access-class 23
    ip http authentication local
    ip http secure-server
    ip http timeout-policy idle 5 life 86400 requests 10000
    !
    ip access-list extended clear-df-bit
    permit tcp any any
    !
    trap debugging
    dialer-list 1 protocol ip permit
    no cdp run
    !
    !
    !
    route-map clear-df-bit-map permit 10
    match ip address clear-df-bit
    set ip df 0
    !
    !
    control-plane
    !
    banner login ^CCCC
    -----------------------------------------------------------------------
    This Router is private property of XXX
    If you have access please disconnect and contact our hotline
    xxx
    -----------------------------------------------------------------------
    ^C
    !
    line con 0
    login local
    no modem enable
    transport output telnet
    stopbits 1
    line aux 0
    login local
    transport output telnet
    line vty 0 4
    access-class 23 in
    privilege level 15
    login local
    length 0
    transport input telnet ssh
    !
    scheduler max-task-time 5000
    scheduler allocate 4000 1000
    scheduler interval 500
    ntp clock-period 17182592
    ntp server 213.133.98.226
    end

  2. VPN_Aachen#sh run
    Building configuration...
    
    Current configuration : 4781 bytes
    !
    ! Last configuration change at 08:38:24 MET Thu Dec 22 2011 by vpn
    ! NVRAM config last updated at 08:39:12 MET Thu Dec 22 2011 by vpn
    !
    version 12.4
    service tcp-keepalives-in
    service tcp-keepalives-out
    service timestamps debug datetime msec localtime show-timezone
    service timestamps log datetime msec localtime show-timezone
    service password-encryption
    service sequence-numbers
    !
    hostname VPN_XXX
    !
    boot-start-marker
    boot-end-marker
    !
    logging buffered 51200
    
    !
    no aaa new-model
    clock timezone MET 1
    clock summer-time MESZ recurring last Sun Mar 2:00 last Sun Oct 3:00
    !
    crypto pki trustpoint TP-self-signed-850411496
    enrollment selfsigned
    subject-name cn=IOS-Self-Signed-Certificate-850411496
    revocation-check none
    rsakeypair TP-self-signed-850411496
    !
    !
    dot11 syslog
    ip cef
    !
    !
    ip dhcp excluded-address 10.10.10.1
    !
    !
    no ip domain lookup
    ip domain name domain.local
    !
    multilink bundle-name authenticated
    isdn switch-type basic-net3
    !
    !
    crypto isakmp keepalive 20 8 periodic
    !
    !
    !
    !
    !
    crypto ipsec client ezvpn crws-client
    connect auto
    group GROUP key 6 KEY
    mode network-extension
    peer 11.11.11.11 default
    peer 12.12.12.12
    idletime 600
    xauth userid mode interactive
    !
    !
    archive
    log config
     hidekeys
    !
    !
    ip tcp synwait-time 10
    ip tftp source-interface Vlan1
    ip ssh time-out 60
    ip ssh authentication-retries 2
    !
    !
    !
    interface BRI0
    no ip address
    encapsulation hdlc
    shutdown
    isdn switch-type basic-net3
    isdn point-to-point-setup
    !
    interface ATM0
    no ip address
    no ip redirects
    no ip unreachables
    no ip proxy-arp
    ip nat outside
    ip virtual-reassembly
    ip route-cache flow
    no ip mroute-cache
    atm vc-per-vp 64
    no atm ilmi-keepalive
    dsl operating-mode auto
    !
    interface ATM0.1 point-to-point
    no ip redirects
    no ip unreachables
    no ip proxy-arp
    pvc 1/32
     oam-pvc 0
     pppoe-client dial-pool-number 1
    !

  3. Liebes Forum,

     

    wir haben in einer Außenstelle ein kleines Problem mit den Antwortzeiten.

    Sobald wir z.B. eine Remoteverbindung zu einem Client aufbauen, schwanken diese zwischen 100-800ms. Im Normalfall schwankt dies zwischen 60-80ms.

     

    Folgende Struktur:

     

    Standort Firma:

    - 2 ISP Anbieter mit jeweils 10MBit

    - 2 Cisco 2800 Router (VPN Router) mit IOS Version 12.4(9)T5

     

    Standort Außenstelle:

    - VPN 836/876 Router in diesem Fall IOS Version 12.4(15)T10

    - 1 Cisco C2960 mit IOS Version 12.2(25)SEE2

     

    Die DSL Business Leitung soll laut Telekom in Ordnung sein.

     

    Anbei der Output:

    VPN_Aachen#sh dsl int atm 0
    ATM0
    Alcatel 20190 chipset information
                   ATU-R (DS)                      ATU-C (US)
    Modem Status:    Showtime (DMTDSL_SHOWTIME)
    DSL Mode:        ITU G.992.1 (G.DMT) Annex B
    ITU STD NUM:     0x03                            0x1
    Vendor ID:       'STMI'                          'IFTN'
    Vendor Specific: 0x0000                          0x71B8
    Vendor Country:  0x0F                            0xB5
    Chip ID:         C196 (0)
    DFE BOM:         DFE3.0 Annex B (2)
    Capacity Used:   77%                             61%
    Noise Margin:    13.5 dB                         19.0 dB
    Output Power:    13.0 dBm                        10.0 dBm
    Attenuation:     13.0 dB                          6.0 dB
    Defect Status:   None                            None
    Last Fail Code:  None
    Watchdog Counter: 0x52
    Watchdog Resets: 0
    Selftest Result: 0x00
    Subfunction:     0x00 (UR2)
    Interrupts:      12378 (0 spurious)
    PHY Access Err:  0
    Activations:     1
    LED Status:      ON
    LED On Time:     100
    LED Off Time:    100
    Init FW:         init_AMR-3.0.014_no_bist.bin
    Operation FW:    AMR-3.0.014.bin
    FW Source:       embedded
    FW Version:      3.0.14
    
                    Interleave             Fast    Interleave              Fast
    Speed (kbps):          6656                0           640                 0
    Cells:              2303410                0      10542259                 0
    Reed-Solomon EC:          0                0             0                 0
    CRC Errors:               0                0             0                 0
    Header Errors:            0                0             0                 0
    Total BER:                0E-0           0E-0
    Leakage Average BER:      0E-0           0E-0
                           ATU-R (DS)      ATU-C (US)
    Bitswap:               enabled            enabled
    Bitswap success:          0                   0
    Bitswap failure:          0                   0
    
    LOM Monitoring : Disabled
    
    
    DMT Bits Per Bin
    000: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
    010: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
    020: 0 6 7 7 8 8 8 8 8 8 8 9 9 9 9 9
    030: 9 8 8 8 8 7 6 6 6 5 5 5 4 4 5 6
    040: 7 9 9 A A B B B B C B B C B C B
    050: B B B B B B B B B B C B B B B B
    060: 0 B B B B B B B B B B B B B B B
    070: B B B B 2 B B B B B B B B B B B
    080: B B B B B B B B A B A A A B A A
    090: A A B A A A A A A A A A A A A A
    0A0: A A A A A A A A A A A 9 9 A A A
    0B0: 9 A 9 9 A 9 9 9 9 9 9 9 9 9 9 9
    0C0: 9 9 9 9 9 9 9 9 9 9 A 9 9 9 9 9
    0D0: 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9
    0E0: 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9
    0F0: 9 9 9 9 8 9 9 8 9 9 9 8 8 8 8 8
    
    DSL: Training log buffer capability is not enabled
    

     

    Dies ist allerdings nur 1 von 30 anderen Außenstellen. Die anderen funktionieren Problemlos.

     

    Vielen Dank.

     

    Grüße

     

    Rolf

  4. Hallo.

     

    Ja das auf alle Fälle. Außer Du hast die Möglichkeiten das die Kosten übernommen werden.

    Am besten sind die MS Press Bücher.

    Für den MCITP Server Administrator gibt es hier eine Sammlung:

    MCITP Windows Server 2008 Server Administrator CorePack - Original Microsoft Training für Examen 70-640, 70-642, 70-646: Amazon.de: Dan Holme, Nelson Ruest, Danielle Ruest, Tony Northrup, J.C. Mackin, Ian McLean, Orin Thomas: Bücher

    Kannst aber auch hier im Forum suchen, da gibt es immer wieder Leute die Ihre Bücher abgeben für weniger.

     

    Ansonsten einfach noch ein wenig die Boardsuche benutzen, einige Themen wurden schon angesprochen.

     

    Grüße

     

    Rolf

×
×
  • Neu erstellen...