Jump to content
Sign in to follow this  
DocZenith

Callmanager Fehlermeldung - Anruf kommt nicht durch

Recommended Posts

Hi!

 

Habe folgendes Problem, ein Anruf wird vom Voice Router zum Callmanager geschickt, aber von diesem nicht angenommen. Der CCM bringt folgende Fehlermeldung:

 

SETUP pd = 8 callref = 0x236D

Bearer Capability i = 0x9090A3

Calling Party Number i = 0x0083, '00160xxxxxxxx'

Called Party Number i = 0xC1, '50601'

User-User i = 0x9B05

IE out of order or end of private IEs --

Net Specific Fac i = 0x060008914A00042800B500001240013C05010000327A4D10CAD311DDA4BE000ED7AF8D6000CD1D828007000A141E04C3611100327A4D10CAD311DDAC23F6FD33A39842809A06130000000C6013800B050001000A141E0442D3001E400000060401004C60138012150001000A141E0442D2000A141E0442D300130000000C2013

RESERVED = 00x80

IE out of order or end of private IEs --

UNRECOGNIZED VARIABLE (0x0B) i = 0x0001000A14

Progress Ind i = 0x42D3001E - Reserved value

Information Rate i = undefined

IE out of order or end of private IEs --

Segmented Message i = 0x0401004C2013

RESERVED = 00x80

UNRECOGNIZED VARIABLE (0x12) i = 0x0001000A141E0442D2000A141E0442D30013000000

IE out of order or end of private IEs --

UNRECOGNIZED VARIABLE (0x0D) i = 0x01800B050001000A141E0442D3001E400000060401004D40018012150001000A141E0442D2000A141E0442D300010001000180018001000342003210A8018080

IE 0xF0

IE out of order or end of private IEs --

UNRECOGNIZED VARIABLE: 0x01 i = 0xB500001280E86001010001A180E0A104038090A31801896C0D21833136303936383732383739700AC13338303133353032307D0291811CB69E81000367746400

IE out of order or end of private IEs --

Segmented Message i = undefined

IE 0xAB

UNRECOGNIZED VARIABLE (0x49) i = 0x4D2C0D0A50524E2C6973646E2A2C2C2C0D0A5553492C726174652C632C732C632C310D0A5553492C6C6179312C616C61770D0A544D522C30300D0A43504E2C3032

IE out of order or end of private IEs --

Keypad Facility i = '1,380135020', 0x0D0A, 'CGN,04,,1,y,4,160xxxxxxxx', 0x0D0A, 'CPC,'

UNRECOGNIZED VARIABLE (0x30) i = 0x0D0A4643492C2C2C2C2C2C2C792C0D0A4743492C33323761346431306361643331316464613462653030306564376166386436300D0A0D0A80

Congestion Level = 0x03 (Error: reserved value B3

End to End Delay i = 0x67746401

RESERVED = 00x80

IE 0xAB

UNRECOGNIZED VARIABLE (0x49) i = 0x4D2C0D0A50524E2C6973646E2A2C2C2C0D0A5553492C726174652C632C732C632C310D0A5553492C6C6179312C616C61770D0A544D522C30300D0A43504E2C3032

IE out of order or end of private IEs --

Keypad Facility i = '1,380135020', 0x0D0A, 'CGN,04,,1,y,4,160xxxxxxxx', 0x0D0A, 'CPC,'

UNRECOGNIZED VARIABLE (0x30) i = 0x0D0A4643492C2C2C2C2C2C2C79

Decode Error: IE Length Error (0x39)

 

 

Kann jemand hier etwas mit der Fehlermeldung anfangen? Ich kann über mein IP Phone ganz normal raus telefonieren.

 

Gruss.

Share this post


Link to post

HI

 

Hab mal folgendes dazu gefunden

 

You will need to check to see what version of Qsig your PBX uses. I can’t recall the two different versions (maybe iso and something else) one version was not supported by MGCP and was by H.323. You might be running into this problem.

 

 

 

What PBX are you running?

 

Hey everyone,

 

another one of these 'things' that aren't making any sense to me: a customer using C2651XM with an ISDN PRI to their legacy PBX, running Q.sig and the router as a h.323 gateway without problems. Recently a decision has been made to implement calling name transfers on this line and thus switch to MGCP. From my point of view, nothing needs to be changed on the PBX, as they're using Q.sig already.

 

 

 

Now, after switching to MGCP, all calls fail, since we drop them with "Cause i = 0x80D1 - Invalid call reference value." Q.931 translator shows:

 

=============================

12/23/2005 11:43:21.737 CCM

RX <- SEGMENT pd = 8 callref = 0x000C

Segmented Message i = 0x0105

Bearer Capability i = 0x2A8003313030020302676480033130300203026765A00980010181010182010AA10980010181010182010A1C1D9FAA06

RESERVED = 00x80

IE out of order or end of private IEs --

UNRECOGNIZED VARIABLE: 0x01 i =

RESERVED = 20x82

UNRECOGNIZED VARIABLE: 0x01 i =

RESERVED = 110x8B

UNRECOGNIZED VARIABLE: 0x01 i =

Sending Complete

UNRECOGNIZED VARIABLE (0x0F) i = 0x02D8

IE 0xC0

IE out of order or end of private IEs --

UNRECOGNIZED VARIABLE (0x02) i = 0x55

UNRECOGNIZED VARIABLE (0x30) i = 0x820406400840

IE out of order or end of private IEs --

Facility i = 0x9FAA068001008201008B0102A1300202D8D006082B0C02885302010D3020801E090A02000202020202020101010101010103020101010000000000000000

Facility i = 0x9FAA068001008201008B0100A1090202D8E00201008400

Facility i = 0x9FAA068001008201018B0100A1340202D8F006082B0C0288

Decode Error: IE Length Error (0x42)

=============================

12/23/2005 11:43:21.737 CCM

TX -> RELEASE_COMP pd = 8 callref = 0x800C

Cause i = 0x80D1 - Invalid call reference value

=============================

 

 

 

If I understand this correctly, CCM doesn't recognize the incoming SETUP correctly? We're running CCM 3.3.3sr2 and 12.3.4T2 on the gateway.We had to switch back to h.323 and everything works fine again... How do we make CCM understand this scenario? Upgrade CCM/IOS ?

 

 

 

Cheers & Happy 2006.

 

ML

Share this post


Link to post

Hi,

 

danke für die Hilfe, hatte das auch schon gefunden, aber leider ist das nicht die Lösung, verwende auch kein Q.sig. :-(

 

Egal, weiter gehts, setze mich heute nochmal dran, vielleicht finde ich heute die Lösung.

 

Gruss.

Share this post


Link to post
Der letzte Beitrag zu diesem Thema ist mehr als 180 Tage alt. Bitte überlege Dir, ob es nicht sinnvoller ist ein neues Thema zu erstellen.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

Werbepartner:



×
×
  • Create New...