Cisco Router auf Microsoft Server einwählen

[barni7 10]

Hallo zusammen,

 

habe folgendes Problem.

Will mich über einen Router auf einen Server einwählen,

funktioniert aber nicht so wirklich. Dialer geht up bri now conntected

bekomme aber keine IP-adresse vom Sérver zugewiesen.

 

Config:

 

hostname Router

!

boot-start-marker

boot-end-marker

!

no network-clock-participate slot 1

no network-clock-participate wic 0

no aaa new-model

ip subnet-zero

no ip cef

!

isdn switch-type basic-net3

!

interface FastEthernet0/0

ip address 192.168.164.10 255.255.255.0

duplex auto

speed auto

!

interface BRI0/0

ip address negotiated

encapsulation ppp

dialer pool-member 1

isdn switch-type basic-net3

ppp authentication ms-chap-v2

!

!

interface Dialer1

ip address negotiated

encapsulation ppp

dialer pool 1

dialer idle-timeout 200000

dialer string 08111236

dialer load-threshold 20 outbound

dialer-group 1

ppp authentication ms-chap-v2

ppp chap hostname test

ppp chap password 0 1234567890

!

ip nat pool Bogen 10.99.9.1 10.99.9.2 netmask 255.255.255.252

ip nat inside source route-map Bogen pool Bogen

ip http server

ip classless

ip route 192.168.100.0 255.255.255.0 Dialer1

!

access-list 50 permit 192.168.164.0 0.0.0.255

dialer-list 1 protocol ip permit

!

route-map Bogen permit 10

match ip address 50

match interface Dialer1

!

line con 0

line aux 0

line vty 0 4

login

!

!

end

 

 

debug isdn q931

 

 

debug isdn q931 is ON.

 

*Mar 1 02:57:45.519: %LINK-3-UPDOWN: Interface BRI0/0:1, changed state to up

*Mar 1 02:57:45.523: %DIALER-6-BIND: Interface BR0/0:1 bound to profile Di1

*Mar 1 02:57:45.523: %ISDN-6-CONNECT: Interface BRI0/0:1 is now connected to 08111236 N/A

*Mar 1 02:58:05.668: %ISDN-6-DISCONNECT: Interface BRI0/0:1 disconnected from 08111236 , call lasted 20 seconds

*Mar 1 02:58:05.800: %LINK-3-UPDOWN: Interface BRI0/0:1, changed state to down

*Mar 1 02:58:05.804: %DIALER-6-UNBIND: Interface BR0/0:1 unbound from profile Di1

*Mar 1 02:58:12.203: %LINK-3-UPDOWN: Interface BRI0/0:1, changed state to up

*Mar 1 02:58:12.203: %DIALER-6-BIND: Interface BR0/0:1 bound to profile Di1

*Mar 1 02:58:12.207: %ISDN-6-CONNECT: Interface BRI0/0:1 is now connected to 08111236 N/A

–

debug ppp authentication

 

PPP authentication debugging is on

Router#

*Mar 1 00:00:41.948: %ISDN-6-LAYER2UP: Layer 2 for Interface BR0/0, TEI 80 changed to up

*Mar 1 00:00:44.797: %LINK-3-UPDOWN: Interface BRI0/0:1, changed state to up

*Mar 1 00:00:44.797: %DIALER-6-BIND: Interface BR0/0:1 bound to profile Di1

*Mar 1 00:00:44.801: %ISDN-6-CONNECT: Interface BRI0/0:1 is now connected to 08111236 N/A

*Mar 1 00:00:44.817: BR0/0:1 PPP: Using dialer call direction

*Mar 1 00:00:44.821: BR0/0:1 PPP: Treating connection as a callout

*Mar 1 00:00:44.821: BR0/0:1 PPP: Session handle[9C000000] Session id[1]

*Mar 1 00:00:44.821: BR0/0:1 PPP: Authorization required

*Mar 1 00:01:04.954: %ISDN-6-DISCONNECT: Interface BRI0/0:1 disconnected from 08111236 , call lasted 20 seconds

*Mar 1 00:01:05.098: %LINK-3-UPDOWN: Interface BRI0/0:1, changed state to down

*Mar 1 00:01:05.098: BR0/0:1 PPP: Authorization required

*Mar 1 00:01:05.098: %DIALER-6-UNBIND: Interface BR0/0:1 unbound from profile Di1

*Mar 1 00:01:10.459: %LINK-3-UPDOWN: Interface BRI0/0:1, changed state to up

*Mar 1 00:01:10.459: %DIALER-6-BIND: Interface BR0/0:1 bound to profile Di1

*Mar 1 00:01:10.463: %ISDN-6-CONNECT: Interface BRI0/0:1 is now connected to 08111236 N/A

*Mar 1 00:01:10.463: BR0/0:1 PPP: Using dialer call direction

*Mar 1 00:01:10.463: BR0/0:1 PPP: Treating connection as a callout

*Mar 1 00:01:10.463: BR0/0:1 PPP: Session handle[C4000004] Session id[2]

*Mar 1 00:01:10.467: BR0/0:1 PPP: Authorization required

[barni7 10]

PPP:

PPP protocol errors debugging is on

PPP protocol negotiation debugging is on

PPP packet display debugging is on

 

 

 

Router#

*Mar 1 00:03:02.182: %LINK-3-UPDOWN: Interface BRI0/0:1, changed state to up

*Mar 1 00:03:02.182: %DIALER-6-BIND: Interface BR0/0:1 bound to profile Di1

*Mar 1 00:03:02.186: %ISDN-6-CONNECT: Interface BRI0/0:1 is now connected to 08111236 N/A

*Mar 1 00:03:02.186: BR0/0:1 PPP: Using dialer call direction

*Mar 1 00:03:02.186: BR0/0:1 PPP: Treating connection as a callout

*Mar 1 00:03:02.186: BR0/0:1 PPP: Session handle[23000005] Session id[3]

*Mar 1 00:03:02.186: BR0/0:1 PPP: Phase is ESTABLISHING, Active Open

*Mar 1 00:03:02.186: BR0/0:1 LCP: O CONFREQ [Closed] id 21 len 15

*Mar 1 00:03:02.186: BR0/0:1 LCP: AuthProto MS-CHAP-V2 (0x0305C22381)

*Mar 1 00:03:02.190: BR0/0:1 LCP: MagicNumber 0x12045DD5 (0x050612045DD5)

*Mar 1 00:03:04.189: BR0/0:1 LCP: TIMEout: State REQsent

*Mar 1 00:03:04.189: BR0/0:1 LCP: O CONFREQ [REQsent] id 22 len 15

*Mar 1 00:03:04.189: BR0/0:1 LCP: AuthProto MS-CHAP-V2 (0x0305C22381)

*Mar 1 00:03:04.189: BR0/0:1 LCP: MagicNumber 0x12045DD5 (0x050612045DD5)

*Mar 1 00:03:06.204: BR0/0:1 LCP: TIMEout: State REQsent

*Mar 1 00:03:06.204: BR0/0:1 LCP: O CONFREQ [REQsent] id 23 len 15

*Mar 1 00:03:06.204: BR0/0:1 LCP: AuthProto MS-CHAP-V2 (0x0305C22381)

*Mar 1 00:03:06.204: BR0/0:1 LCP: MagicNumber 0x12045DD5 (0x050612045DD5)

*Mar 1 00:03:08.220: BR0/0:1 LCP: TIMEout: State REQsent

*Mar 1 00:03:08.220: BR0/0:1 LCP: O CONFREQ [REQsent] id 24 len 15

*Mar 1 00:03:08.220: BR0/0:1 LCP: AuthProto MS-CHAP-V2 (0x0305C22381)

*Mar 1 00:03:08.220: BR0/0:1 LCP: MagicNumber 0x12045DD5 (0x050612045DD5)

*Mar 1 00:03:10.235: BR0/0:1 LCP: TIMEout: State REQsent

*Mar 1 00:03:10.235: BR0/0:1 LCP: O CONFREQ [REQsent] id 25 len 15

*Mar 1 00:03:10.235: BR0/0:1 LCP: AuthProto MS-CHAP-V2 (0x0305C22381)

*Mar 1 00:03:10.235: BR0/0:1 LCP: MagicNumber 0x12045DD5 (0x050612045DD5)

*Mar 1 00:03:12.250: BR0/0:1 LCP: TIMEout: State REQsent

*Mar 1 00:03:12.250: BR0/0:1 LCP: O CONFREQ [REQsent] id 26 len 15

*Mar 1 00:03:12.250: BR0/0:1 LCP: AuthProto MS-CHAP-V2 (0x0305C22381)

*Mar 1 00:03:12.250: BR0/0:1 LCP: MagicNumber 0x12045DD5 (0x050612045DD5)

*Mar 1 00:03:14.266: BR0/0:1 LCP: TIMEout: State REQsent

*Mar 1 00:03:14.266: BR0/0:1 LCP: O CONFREQ [REQsent] id 27 len 15

*Mar 1 00:03:14.266: BR0/0:1 LCP: AuthProto MS-CHAP-V2 (0x0305C22381)

*Mar 1 00:03:14.266: BR0/0:1 LCP: MagicNumber 0x12045DD5 (0x050612045DD5)

*Mar 1 00:03:16.285: BR0/0:1 LCP: TIMEout: State REQsent

*Mar 1 00:03:16.285: BR0/0:1 LCP: O CONFREQ [REQsent] id 28 len 15

*Mar 1 00:03:16.285: BR0/0:1 LCP: AuthProto MS-CHAP-V2 (0x0305C22381)

*Mar 1 00:03:16.285: BR0/0:1 LCP: MagicNumber 0x12045DD5 (0x050612045DD5)

*Mar 1 00:03:18.300: BR0/0:1 LCP: TIMEout: State REQsent

*Mar 1 00:03:18.300: BR0/0:1 LCP: O CONFREQ [REQsent] id 29 len 15

*Mar 1 00:03:18.300: BR0/0:1 LCP: AuthProto MS-CHAP-V2 (0x0305C22381)

*Mar 1 00:03:18.300: BR0/0:1 LCP: MagicNumber 0x12045DD5 (0x050612045DD5)

*Mar 1 00:03:20.316: BR0/0:1 LCP: TIMEout: State REQsent

*Mar 1 00:03:20.316: BR0/0:1 LCP: O CONFREQ [REQsent] id 30 len 15

*Mar 1 00:03:20.316: BR0/0:1 LCP: AuthProto MS-CHAP-V2 (0x0305C22381)

*Mar 1 00:03:20.316: BR0/0:1 LCP: MagicNumber 0x12045DD5 (0x050612045DD5)

*Mar 1 00:03:22.331: BR0/0:1 LCP: TIMEout: State REQsent

*Mar 1 00:03:22.331: BR0/0:1 LCP: State is Listen

*Mar 1 00:03:22.331: %ISDN-6-DISCONNECT: Interface BRI0/0:1 disconnected from 08111236 , call lasted 20 seconds

*Mar 1 00:03:22.471: %LINK-3-UPDOWN: Interface BRI0/0:1, changed state to down

*Mar 1 00:03:22.475: %DIALER-6-UNBIND: Interface BR0/0:1 unbound from profile Di1

*Mar 1 00:03:22.475: BR0/0:1 PPP: Sending Acct Event[Down] id[4]

*Mar 1 00:03:22.479: BR0/0:1 LCP: State is Closed

*Mar 1 00:03:22.479: BR0/0:1 PPP: Phase is DOWN

[barni7 10]

Router#debug dialer

Dial on demand events debugging is on

Router#debug dialer ev

Router#debug dialer events Dial on demand events debugging is on

Router#

*Mar 1 00:05:29.099: BR0/0 DDR: rotor dialout [best] least recent failure is also most recent failure

*Mar 1 00:05:29.099: BR0/0 DDR: rotor dialout [best] trying untried dialout

*Mar 1 00:05:29.099: BR0/0 DDR: rotor dialout [best] also has most recent failure

*Mar 1 00:05:29.099: BR0/0 DDR: rotor dialout [best]

*Mar 1 00:05:29.099: BR0/0 DDR: Dialing cause ip (s=192.168.164.2, d=192.168.100.19)

*Mar 1 00:05:29.099: BR0/0 DDR: Attempting to dial 08111236

*Mar 1 00:05:31.883: %LINK-3-UPDOWN: Interface BRI0/0:1, changed state to up

*Mar 1 00:05:31.883: BR0/0:1: interface must be fifo queue, force fifo

*Mar 1 00:05:31.883: %DIALER-6-BIND: Interface BR0/0:1 bound to profile Di1

*Mar 1 00:05:31.883: %ISDN-6-CONNECT: Interface BRI0/0:1 is now connected to 08111236 N/A

*Mar 1 00:05:52.028: BR0/0:1 DDR: disconnecting call

*Mar 1 00:05:52.028: %ISDN-6-DISCONNECT: Interface BRI0/0:1 disconnected from 08111236 , call lasted 20 seconds

*Mar 1 00:05:52.180: %LINK-3-UPDOWN: Interface BRI0/0:1, changed state to down

*Mar 1 00:05:52.184: BR0/0 DDR: has total 0 call(s), dial_out 0, dial_in 0

*Mar 1 00:05:52.184: %DIALER-6-UNBIND: Interface BR0/0:1 unbound from profile Di1

*Mar 1 00:05:56.187: BR0/0 DDR: rotor dialout [best] least recent failure is also most recent failure

*Mar 1 00:05:56.187: BR0/0 DDR: rotor dialout [best] trying untried dialout

*Mar 1 00:05:56.187: BR0/0 DDR: rotor dialout [best] also has most recent failure

*Mar 1 00:05:56.187: BR0/0 DDR: rotor dialout [best]

*Mar 1 00:05:56.187: BR0/0 DDR: Dialing cause ip (s=192.168.164.2, d=192.168.100.19)

*Mar 1 00:05:56.191: BR0/0 DDR: Attempting to dial 08111236

*Mar 1 00:05:58.739: %LINK-3-UPDOWN: Interface BRI0/0:1, changed state to up

*Mar 1 00:05:58.743: BR0/0:1: interface must be fifo queue, force fifo

*Mar 1 00:05:58.743: %DIALER-6-BIND: Interface BR0/0:1 bound to profile Di1

*Mar 1 00:05:58.743: %ISDN-6-CONNECT: Interface BRI0/0:1 is now connected to 08111236 N/A

–

Router#show version

Cisco Internetwork Operating System Software

IOS C2600 Software (C2600-IS-M), Version 12.3(13), RELEASE SOFTWARE (fc2)

Technical Support: Cisco - Shortcut

Copyright © 1986-2005 by cisco Systems, Inc.

Compiled Thu 10-Feb-05 02:11 by ssearch

Image text-base: 0x80008098, data-base: 0x81A2CC9C

 

ROM: System Bootstrap, Version 12.2(8r) [cmong 8r], RELEASE SOFTWARE (fc1)

ROM: C2600 Software (C2600-IS-M), Version 12.3(13), RELEASE SOFTWARE (fc2)

 

Router uptime is 9 minutes

System returned to ROM by reload

System image file is "flash:c2600-is-mz.123-13.bin"

 

cisco 2651XM (MPC860P) processor (revision 0x301) with 126976K/4096K bytes of memory.

Processor board ID FOC0XXX1TMV (3211936930)

M860 processor: part number 5, mask 2

Bridging software.

X.25 software, Version 3.0.0.

Basic Rate ISDN software, Version 1.1.

2 FastEthernet/IEEE 802.3 interface(s)

1 ISDN Basic Rate interface(s)

32K bytes of non-volatile configuration memory.

32768K bytes of processor board System flash (Read/Write)

 

Configuration register is 0x2102

–

hat im Labor zwischen pc und Router wunderbar gefunkt aber jetzt mit Server nix geht !!!

Was anders ist, Telefonanlagen Anschluss, und Server.

Man sieht an der Tel. Anlage den call ankomen der bleibt auch bestehen wir auber warum auch immer abgebrochen.

wowiewas soll ich denn noch debuggen ????

 

SOS

[blackbox 10]

hi,

 

ups - gerade erst das ppp debug gesehen - wollte schon drum bitten :-)) - was sagt den das ras ? hast du mal was anderes wie ms-chap-v2 getestet ?

[barni7 10]

ich debugge gerne noch weiter

[blackbox 10]

ich denke auf der Router Seite sehen wir nix mehr - da er ja sendet aber nix zurück bekommt.

[tom12 10]

Hi!

 

Mach am dialer interface folgendes:

no ppp authentication ms-chap-v2

 

Falls es nicht klappt, poste ein:

debug ppp authentication

deb ppp negotia

 

 

Grüsse,

Thomas