Router#debug dialer
Dial on demand events debugging is on
Router#debug dialer ev
Router#debug dialer events Dial on demand events debugging is on
Router#
*Mar 1 00:05:29.099: BR0/0 DDR: rotor dialout [best] least recent failure is also most recent failure
*Mar 1 00:05:29.099: BR0/0 DDR: rotor dialout [best] trying untried dialout
*Mar 1 00:05:29.099: BR0/0 DDR: rotor dialout [best] also has most recent failure
*Mar 1 00:05:29.099: BR0/0 DDR: rotor dialout [best]
*Mar 1 00:05:29.099: BR0/0 DDR: Dialing cause ip (s=192.168.164.2, d=192.168.100.19)
*Mar 1 00:05:29.099: BR0/0 DDR: Attempting to dial 08111236
*Mar 1 00:05:31.883: %LINK-3-UPDOWN: Interface BRI0/0:1, changed state to up
*Mar 1 00:05:31.883: BR0/0:1: interface must be fifo queue, force fifo
*Mar 1 00:05:31.883: %DIALER-6-BIND: Interface BR0/0:1 bound to profile Di1
*Mar 1 00:05:31.883: %ISDN-6-CONNECT: Interface BRI0/0:1 is now connected to 08111236 N/A
*Mar 1 00:05:52.028: BR0/0:1 DDR: disconnecting call
*Mar 1 00:05:52.028: %ISDN-6-DISCONNECT: Interface BRI0/0:1 disconnected from 08111236 , call lasted 20 seconds
*Mar 1 00:05:52.180: %LINK-3-UPDOWN: Interface BRI0/0:1, changed state to down
*Mar 1 00:05:52.184: BR0/0 DDR: has total 0 call(s), dial_out 0, dial_in 0
*Mar 1 00:05:52.184: %DIALER-6-UNBIND: Interface BR0/0:1 unbound from profile Di1
*Mar 1 00:05:56.187: BR0/0 DDR: rotor dialout [best] least recent failure is also most recent failure
*Mar 1 00:05:56.187: BR0/0 DDR: rotor dialout [best] trying untried dialout
*Mar 1 00:05:56.187: BR0/0 DDR: rotor dialout [best] also has most recent failure
*Mar 1 00:05:56.187: BR0/0 DDR: rotor dialout [best]
*Mar 1 00:05:56.187: BR0/0 DDR: Dialing cause ip (s=192.168.164.2, d=192.168.100.19)
*Mar 1 00:05:56.191: BR0/0 DDR: Attempting to dial 08111236
*Mar 1 00:05:58.739: %LINK-3-UPDOWN: Interface BRI0/0:1, changed state to up
*Mar 1 00:05:58.743: BR0/0:1: interface must be fifo queue, force fifo
*Mar 1 00:05:58.743: %DIALER-6-BIND: Interface BR0/0:1 bound to profile Di1
*Mar 1 00:05:58.743: %ISDN-6-CONNECT: Interface BRI0/0:1 is now connected to 08111236 N/A
–
Router#show version
Cisco Internetwork Operating System Software
IOS C2600 Software (C2600-IS-M), Version 12.3(13), RELEASE SOFTWARE (fc2)
Technical Support: Cisco - Shortcut
Copyright © 1986-2005 by cisco Systems, Inc.
Compiled Thu 10-Feb-05 02:11 by ssearch
Image text-base: 0x80008098, data-base: 0x81A2CC9C
ROM: System Bootstrap, Version 12.2(8r) [cmong 8r], RELEASE SOFTWARE (fc1)
ROM: C2600 Software (C2600-IS-M), Version 12.3(13), RELEASE SOFTWARE (fc2)
Router uptime is 9 minutes
System returned to ROM by reload
System image file is "flash:c2600-is-mz.123-13.bin"
cisco 2651XM (MPC860P) processor (revision 0x301) with 126976K/4096K bytes of memory.
Processor board ID FOC0XXX1TMV (3211936930)
M860 processor: part number 5, mask 2
Bridging software.
X.25 software, Version 3.0.0.
Basic Rate ISDN software, Version 1.1.
2 FastEthernet/IEEE 802.3 interface(s)
1 ISDN Basic Rate interface(s)
32K bytes of non-volatile configuration memory.
32768K bytes of processor board System flash (Read/Write)
Configuration register is 0x2102
–
hat im Labor zwischen pc und Router wunderbar gefunkt aber jetzt mit Server nix geht !!!
Was anders ist, Telefonanlagen Anschluss, und Server.
Man sieht an der Tel. Anlage den call ankomen der bleibt auch bestehen wir auber warum auch immer abgebrochen.
wowiewas soll ich denn noch debuggen ????
SOS