Hallo Forum,
dies ist mein erster Beitrag und direkt ein Hilfeersuchen.
Habe hier einen 801 stehen, der mein WLAN mit dem Internet per Freenet CbC verbinden soll. Struktur ist folgendermaßen:
2 PC mit WLAN-Karten, auf DHCP eingestellt.
1 WLAN AP als DHCP-Server (192.168.1.1), gibt als DNS bereits den Freenet-Server (62.104.191.241) den Clients mit.
und dann der Cisco mit fester IP 192.168.1.2. Problem: Einwahl funktioniert problemlos, aber keine Seitenaufrufe möglich (DNS-Problem), Router bekommt aber IP-Adresse von Freenet zugewiesen, kann aber nicht ins Internet pingen, die PCs natürlich auch nicht, NSLookups klappen nicht, der Router wählt sich also ein, läßt aber scheinbar nix IP-mäßiges durch..
Im folgenden meine config (mit configmaker erstellt):
! ******************************************************************
! home.cfg - Cisco router configuration file
! Automatically created by Cisco ConfigMaker v2.5 Build 8
! Freitag, 14. Mai 2004, 06:35:29
!
! Hostname: home
! Model: 801
! ******************************************************************
!
service timestamps debug uptime
service timestamps log uptime
no service password-encryption
no service tcp-small-servers
no service udp-small-servers
!
hostname home
!
enable secret XXXXX
!
ip source-route
ip name-server 62.104.191.241
!
isdn switch-type basic-net3
!
ip subnet-zero
ip domain-lookup
ip routing
!
interface Dialer 1
description connected to Internet
ip address negotiated
ip nat outside
ip access-group 101 in
no ip split-horizon
encapsulation ppp
dialer in-band
dialer idle-timeout 120
dialer string 019231760
dialer hold-queue 10
dialer-group 1
ppp authentication chap pap callin
ppp chap hostname XXXXX
ppp chap password XXXXXX
ppp pap sent-username joergens password XXXXXX
no ppp multilink
no cdp enable
!
interface Ethernet 0
no shutdown
description connected to EthernetLAN
ip address 192.168.1.2 255.255.255.0
ip nat inside
ip access-group 100 in
keepalive 10
!
interface BRI 0
no shutdown
description connected to Internet
no ip address
ip nat outside
dialer rotary-group 1
!
! Access Control List 1
!
no access-list 1
access-list 1 permit 192.168.1.0 0.0.0.255
!
! Access Control List 100
!
no access-list 100
access-list 100 permit ip any any
!
! Access Control List 101
!
no access-list 101
access-list 101 permit tcp any any established
!
! Dialer Control List 1
!
no dialer-list 1
dialer-list 1 protocol ip permit
!
! Dynamic NAT
!
ip nat translation timeout 86400
ip nat translation tcp-timeout 86400
ip nat translation udp-timeout 300
ip nat translation dns-timeout 60
ip nat translation finrst-timeout 60
ip nat inside source list 1 interface Dialer 1 overload
!
ip classless
!
! IP Static Routes
ip route 0.0.0.0 0.0.0.0 Dialer 1
no ip http server
no snmp-server location
no snmp-server contact
!
line console 0
exec-timeout 0 0
password home
login
transport input none
!
line vty 0 4
password XXXX
login
!
end
So das war's, wer die meisten Fehler findet hat gewonnen ! :-))
Danke, schonmal....