Jump to content

AI-AP1142N-E-K9 nicht resetbar


Der letzte Beitrag zu diesem Thema ist mehr als 180 Tage alt. Bitte erstelle einen neuen Beitrag zu Deiner Anfrage!

Recommended Posts

Hi zusammen,

 

habe einen Cisco AP zu Händen bekommen... Er ist noch konfiguriert soweit ich das über putty sehe..

 

Wollte es lau Anleitung machen:

 

When the power is on, press and hold the reset button.
Unplug the power, and continue to hold the reset button for 5 -10 seconds.
Plug in the power as you continue to hold the reset the button.
Release the reset button.

 

Wenn ich reset drücke mach das Stromkabel raus und wieder rein blinkt er nur ganz schwach rot....?!

 

Und er resetet nicht normalerweise müsste er dann kurz blau blinken und dann wieder grün..

 

Was kann ich noch tun?

 

Link to post

Versuche mal den Mode Button für 10 Sec beim Staten zu drücken.
Also mit Telnet verbinden über Serielle Konsole

 

Dann gehts weiter über

 

clear lwapp private-config

delete flash:private-multiple-fs

Danach sollte alles weider gut sein.

Link to post
  • 2 weeks later...

Sorry für die späte Antwort war im Urlaub ...

 

Ja das geht bei starten nicht....

 

Wenn ich den Strom Stecker ziehe und dich drücke den "mode Button" und mach das Stromkabel wieder rein, bootet er dann hoch......

Bis die Benutzerkennung kommt und dann habe ich ja kein Passwort....

 

Dann habe ich nur folgende Auswahl....

 

xxxxxxxx>clear iapp ?
  rogue-ap-list  IAPP clear rogue AP list
  statistics     IAPP clear statistics

 

 

Und nun?

 

PS: Bin mit dem Putty über serial rein... nicht übers Telnet menü... Wußte den Port nicht...
 



Das steht drin wenn ich ihn booten lasse vielleicht erkennt jemand was...?!

using eeprom values

WRDTR,CLKTR: 0x83000800 0x40000000
RQDC ,RFDC : 0x80000035 0x00000208

using ÿÿÿÿ ddr static values from serial eeprom
ddr init done

Running Normal Memtest...
using eeprom values

WRDTR,CLKTR: 0x83000800 0x40000000
RQDC ,RFDC : 0x80000035 0x00000208

using ÿÿÿÿ ddr static values from serial eeprom
ddr init done

Running Normal Memtest...
Passed.
IOS Bootloader - Starting system.
FLASH CHIP: Numonyx P33
Checking for Over Erased blocks
................................................................................ ................................................................................ ................................................................................ ......
Xmodem file system is available.

DDR values used from system serial eeprom.
WRDTR,CLKTR: 0x83000800, 0x40000000
RQDC, RFDC : 0x80000035, 0x00000208

PCIE0: link is up.
PCIE0: VC0 is active
PCIE1: link is up.
PCIE1: VC0 is active
PCIEx: initialization done
flashfs[0]: 146 files, 7 directories
flashfs[0]: 0 orphaned files, 0 orphaned directories
flashfs[0]: Total bytes: 32385024
flashfs[0]: Bytes used: 5551104
flashfs[0]: Bytes available: 26833920
flashfs[0]: flashfs fsck took 19 seconds.
Reading cookie from system serial eeprom...Done
Base Ethernet MAC address: 30:f7:0d:13:14:09
Waiting for PHY auto negotiation to complete... TIMEOUT !
Ethernet link is down.

The system has encountered an error initializing
the Ethernet port.
The system is ignoring the error and continuing to boot.
If you abort the system boot process, the following
commands will re-initialize Ethernet, TFTP, and finish
loading the operating system software:

ether_init
tftp_init
boot

Loading "flash:/c1140-k9w7-mx.124-21a.JA1/c1140-k9w7-mx.124-21a.JA1"...######### ################################################################################ ################################################################################ ################################################################################ ################################################################################ ################################################################################ ################################################################################ #####

File "flash:/c1140-k9w7-mx.124-21a.JA1/c1140-k9w7-mx.124-21a.JA1" uncompressed a nd installed, entry point: 0x4000
executing...
enet halted

Restricted Rights Legend

Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
© of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
© (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.

cisco Systems, Inc.
170 West Tasman Drive
San Jose, California 95134-1706



Cisco IOS Software, C1140 Software (C1140-K9W7-M), Version 12.4(21a)JA1, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright © 1986-2009 by Cisco Systems, Inc.
Compiled Wed 16-Sep-09 18:09 by prod_rel_team


Proceeding with system init

Proceeding to unmask interrupts
Initializing flashfs...

flashfs[1]: 146 files, 7 directories
flashfs[1]: 0 orphaned files, 0 orphaned directories
flashfs[1]: Total bytes: 32385024
flashfs[1]: Bytes used: 5551104
flashfs[1]: Bytes available: 26833920
flashfs[1]: flashfs fsck took 5 seconds.
flashfs[1]: Initialization complete....done Initializing flashfs.

Radio0 present A600 8000 90020000 0 90030000 B
Radio1 present A600 8000 98020000 0 98030000 0
Waiting for PHY auto negotiation to complete... TIMEOUT !
Ethernet link is down.

This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by sending email to
export@cisco.com.

cisco AIR-AP1142N-E-K9 (PowerPC405ex) processor (revision A0) with 98294K/32768K bytes of memory.
Processor board ID FCZ1630Z3ED
PowerPC405ex CPU at 586Mhz, revision number 0x147E
Last reset from power-on
1 Gigabit Ethernet interface
2 802.11 Radio(s)

32K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address: 30:F7:0D:13:33:44
Part Number : 73-12836-05
PCA Assembly Number : 800-33767-05
PCA Revision Number : A0
PCB Serial Number : FOC1626XXXX
Top Assembly Part Number : 800-33775-04
Top Assembly Serial Number : FCZ1630XXXX
Top Revision Number : A0
Product/Model Number : AIR-AP1142N-E-K9

A power-injector must be always be installed to prevent a switch overload.


Press RETURN to get started!


*Mar 1 00:00:06.783: %SOAP_FIPS-2-SELF_TEST_IOS_SUCCESS: IOS crypto FIPS self test passed
*Mar 1 00:00:06.799: *** CRASH_LOG = YES

*Mar 1 00:00:08.027: %SOAP_FIPS-2-SELF_TEST_RAD_SUCCESS: RADIO crypto FIPS self test passed on interface Dot11Radio 0
*Mar 1 00:00:08.532: %SOAP_FIPS-2-SELF_TEST_RAD_SUCCESS: RADIO crypto FIPS self test passed on interface Dot11Radio 1Base Ethernet MAC address: 30:F7:0D:13:14:09

*Mar 1 00:00:49.289: %LINK-3-UPDOWN: Interface GigabitEthernet0, changed state to up
*Mar 1 00:00:50.364: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0, changed state to down
*Mar 1 01:00:51: %SYS-6-CLOCKUPDATE: System clock has been updated from 00:00:51 UTC Fri Mar 1 2002 to 01:00:51 CET Fri Mar 1 2002, configured from console by console.
*Mar 1 01:00:51: %SYS-6-CLOCKUPDATE: System clock has been updated from 01:00:51 CET Fri Mar 1 2002 to 01:00:51 CET Fri Mar 1 2002, configured from console by console.
*Mar 1 01:00:52: %LINK-5-CHANGED: Interface Dot11Radio1, changed state to administratively down
*Mar 1 01:00:52: %SYS-5-CONFIG_I: Configured from memory by console
*Mar 1 01:00:52: %SYS-5-RESTART: System restarted --
Cisco IOS Software, C1140 Software (C1140-K9W7-M), Version 12.4(21a)JA1, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright © 1986-2009 by Cisco Systems, Inc.
Compiled Wed 16-Sep-09 18:09 by prod_rel_team
*Mar 1 01:00:52: %SNMP-5-COLDSTART: SNMP agent on host ODE00446A2 is undergoing a cold start
*Mar 1 01:14:19: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to reset
*Mar 1 01:14:19: %LINEPROTO-5-UPDOWN: Line protocol on Interface BVI1, changed state to up
*Mar 1 01:14:19: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio1, changed state to down
*Mar 1 01:14:20: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to down
*Mar 1 01:14:30: %LINK-3-UPDOWN: Interface BVI1, changed state to down
*Mar 1 01:14:31: %LINEPROTO-5-UPDOWN: Line protocol on Interface BVI1, changed state to down
XXXXXXXXXX>

Edited by Virusburn
Link to post

Nein eigentlich hat es sich noch nicht erledigt...

 

Leider ist es so wenn er geresetet wäre, dann wäre das Passwort: Cisco... Ist aber nicht so, ich habe schon mehrere über den Knopf hinten geresetet, und die blinken dann immer blau und danach ist er auf werkseinstellungen, aber der blinkt dann nur rot.... und ohne passwort eben kein konfig menü...

Link to post
Der letzte Beitrag zu diesem Thema ist mehr als 180 Tage alt. Bitte erstelle einen neuen Beitrag zu Deiner Anfrage!

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...