Jump to content

toddy75

Members
  • Gesamte Inhalte

    6
  • Registriert seit

  • Letzter Besuch

Profile Fields

  • Member Title
    Newbie

Fortschritt von toddy75

Apprentice

Apprentice (3/14)

  • Erste Antwort
  • Erster eigener Beitrag
  • Eine Woche dabei
  • Einen Monat dabei
  • 1 Jahre dabei

Neueste Abzeichen

10

Reputation in der Community

  1. Danke für den Hinweis lexus! Mit "auto-duplex gibt es wirklich nicht..." wollte ich nur sagen, dass dieses Feature nicht verfügbar ist. Es ist natürlich richtig, dass der Befehl "duplex auto" heissen müsste... Aber trotzdem: DSL-Router#conf t Enter configuration commands, one per line. End with CNTL/Z. DSL-Router(config)#int fa0/0 DSL-Router(config-if)#duplex auto ^ % Invalid input detected at '^' marker. DSL-Router(config-if)# Der ^ marker steht unter duplex, kommt hier nicht ganz rüber Danke nochmal, toddy75
  2. Dieser Befehl funktioniert nicht. Wieso glaubt mir denn keiner? ;-)
  3. fa0/0 kann speed auto, aber nur half-duplex oder full-duplex. auto-duplex gibt es wirklich nicht...
  4. Hatte die letzte Zeile übersehen - das Interface kann kein auto/auto, allerdings hatte ein anderer Router bei auto auf 100/full gestellt
  5. Hi, erstmal vielen Dank für die superschnelle Antwort! Kann keine fragmented packets sehen, allerdings bin ich nach ip tcp adjust-mss 1452 auf dem Dialer jetzt bei 100KB/Sek. angekommen. Werde nochmal ein bischen mit den Werten spielen... Danke + Gruß, toddy75 – Hatte die letzte Zeile übersehen - das Interface kann kein auto/auto, allerdings hatte ein anderer Router bei auto 100/full
  6. Hallo zusammen, habe meinen Cisco 1751 für den Betrieb an einem 16000er Arcor DSL konfiguriert. Leider ist der Internetzugriff extrem langsam, Downloads mit max. 80KB/Sek. anstatt 1,5MB/Sek. mit meinem Linksys. Finde leider den Fehler nicht, wäre daher für Tipps dankbar. Bin mir bewußt, daß mein LAN zur Zeit an einem 10MBit Interface hängt. Dies wird bald durch ein weiteres 100MBit ersetzt. Trotzdem sollte das Internet doch schneller sein, oder? Hier meine Config: version 12.4 service tcp-keepalives-in service tcp-keepalives-out service timestamps debug datetime msec localtime service timestamps log datetime msec localtime service password-encryption ! hostname DSL-Router ! boot-start-marker boot-end-marker ! security authentication failure rate 3 log logging buffered 51200 notifications ! aaa new-model ! aaa authentication login default local ! aaa session-id common clock timezone Berlin 1 clock summer-time Berlin recurring mmi polling-interval 60 no mmi auto-configure no mmi pvc mmi snmp-timeout 180 no ip source-route ! no ip dhcp use vrf connected ip dhcp excluded-address 192.168.177.1 ip dhcp excluded-address 192.168.177.2 ip dhcp excluded-address 192.168.177.15 ip dhcp excluded-address 192.168.177.16 ip dhcp excluded-address 192.168.177.100 ip dhcp excluded-address 192.168.177.200 ! ip dhcp pool LAN network 192.168.177.0 255.255.255.0 default-router 192.168.177.1 dns-server 195.50.140.114 195.50.140.252 lease 10 ! ip cef ip domain lookup source-interface Dialer0 ip name-server 195.50.140.114 ip name-server 195.50.140.252 no ip bootp server ip auth-proxy max-nodata-conns 3 ip admission max-nodata-conns 3 ! username *** privilege 15 secret 5 *** ! ip tcp synwait-time 10 ! interface Null0 no ip unreachables ! interface Ethernet0/0 description to LAN ip address 192.168.177.1 255.255.255.0 no ip redirects no ip unreachables no ip proxy-arp ip nat inside ip virtual-reassembly ip route-cache flow ip tcp adjust-mss 1452 full-duplex ! interface FastEthernet0/0 description to DSL Modem no ip address ip verify unicast reverse-path no ip redirects no ip unreachables no ip proxy-arp ip nat outside ip virtual-reassembly ip route-cache flow speed auto full-duplex pppoe enable group global pppoe-client dial-pool-number 1 fair-queue ! interface Dialer0 ip address negotiated no ip redirects no ip unreachables no ip proxy-arp ip mtu 1492 ip nat outside ip virtual-reassembly encapsulation ppp ip route-cache flow dialer pool 1 dialer idle-timeout 10800 dialer fast-idle 600 dialer enable-timeout 1 dialer-group 1 no cdp enable ppp authentication chap pap callin ppp chap hostname *** ppp chap password 7 *** ppp pap sent-username *** password 7 *** ! router eigrp 1 passive-interface Ethernet0/0 network 192.168.177.0 auto-summary ! no ip forward-protocol nd ip route 0.0.0.0 0.0.0.0 Dialer0 no ip http server no ip http secure-server ! ip nat inside source list 101 interface Dialer0 overload ! access-list 1 permit any access-list 100 permit ip any any access-list 101 permit ip any any dialer-list 1 protocol ip list 100 ! control-plane ! line con 0 logging synchronous line aux 0 line vty 0 4 ! ntp clock-period 17178769 ntp server 192.53.103.108 ntp server 192.53.103.104 prefer end Im Voraus vielen Dank für jede Hilfe! Gruß, toddy75
×
×
  • Neu erstellen...