Hallo,
ich habe folgendes Problem:
Sorry, viel Text, aber ich wollte alle Infos bereitstellen.
Ich versuch seit Tagen meine neue externe Festplatte über SATA anzuschließen.
Dazu habe ich mir bei Conrad eine PCI-SATA-Karte mit 2 Ports besorgt.
(siehe
Diese Karte habe ich auf dem Motherboard in den 2. von 3 PCI Slots gesteckt.
(Slot 1 ist frei, Slot 3 hält die Capture Card, Slot 1 ist zu dicht and der AGP Graphikkarte))
Motherboard: MSI MS6533, BIOS: Phoenix Award, LTD 6,00 PG, 12.07.2002
Gemäß der Installationsanweisung (siehe unten) habe ich versucht einen Treiber zu installieren:
****************************************************************
Adding the SiI 3x12 controller to an existing Windows 2000/XP or Windows Server 2003 installation:
Follow the instructions in this section to install the Silicon Image SiI 3x12 SATALink controller into a system already running Windows/XP or Windows Server 2003.
1. Power off the system. Insert the SiI 3x12 SATALink controller into an available PCI slot. Connect serial ATA cable(s) between the SiI 3x12 controller and the serial ATA device(s). Power up the system.
2. During OS boot up, Windows will display the 'Found New Hardware Wizard'. Click 'Next'.
3. Select 'Search for a suitable driver for my device (Recommended)' and Click 'Next'.
4. Under 'Optional search locations' insure that 'Floppy disk drives' is checked.
5. Insert the diskette labeled 'Silicon Image SiI 3112 SATALink Driver Installation Disk' into A: and click 'Next'.
6. When the wizard indicates that it found a driver for the device click 'Next'.
7. If the 'Digital Signature Not Found' dialog appears, click 'Yes' to continue installing the driver.
8. The wizard will now copy the required files to the system and start the driver. After starting the driver the wizard will display a completion dialog, click 'Finish' to exit the wizard.
9. See instructions in Verifying Controller Installation to verify controller was installed correctly.
*****************************************************************
Ohne Erfolg !
Kann mir jemand helfen oder einen Tip geben?
Gibt es vielleicht noch Einstellungen (Bios oder so) die ich nicht kenne?
Wo genau müsste ich die PCI SATA Karte im Geräte Manager sehen ?
Folgendes sei noch bemerkt:
1. Ich betreibe die Festplatte ebenfalls über eine SATA Schnittstelle an meinem Laptop.
Das funktioniert problemlos. Hier musste ich nicht einmal Treiber installieren. (auch XP)
2. Ich habe auch schon ein zweites SATA Kabel versucht. Selbes Ergebnis.
3. Über USB kann ich die Festplatte erreichen.
Bin für jede Hilfe Dankbar.
Gruß
Joeckel_1
PS: Wünsche Allen ein Frohes fest gehabt zu haben und ein gutes Neues Jahr 2007 !