Hallo ich brauch mal Hilfe
Habe mir zwei Router cisco 801 zugelegt dies habe ich neu configuriert.
Die Conf hat eine Woche lang gut Funktionier.
danach war der Router nicht mehr erreichbar und verteilt auch keine IP an die Clients
hier die Configuration
Cisco Internetwork Operating System Software
IOS C800 Software (C800-Y6-MW), Version 12.0(5)T, RELEASE SOFTWARE (fc1)
Copyright © 1986-1999 by cisco Systems, Inc.
Compiled Fri 23-Jul-99 01:30 by kpma
Image text-base: 0x000E9000, data-base: 0x00595000
ROM: TinyROM version 1.2(2)
***** uptime is 5 minutes
System returned to ROM by power-on
System restarted at 13:30:02 UTC Sun Jan 8 2006
System image file is "flash:c800-y6-mw.120-5.T"
Cisco C801 (MPC850) processor (revision 1) with 43112K bytes of virtual memory.
Processor board ID JAD041008TZ
CPU part number 33
Bridging software.
Basic Rate ISDN software, Version 1.1.
1 Ethernet/IEEE 802.3 interface(s)
1 ISDN Basic Rate interface(s)
4M bytes of physical memory (DRAM)
8K bytes of non-volatile configuration memory
8M bytes of flash on board (4M from flash card)
Configuration register is 0x2102
------------------ show running-config ------------------
Building configuration...
Current configuration:
!
! Last configuration change at 13:35:32 UTC Sun Jan 8 2006
! NVRAM config last updated at 13:34:26 UTC Sun Jan 8 2006
!
version 12.0
no service pad
service timestamps debug uptime
service timestamps log uptime
service password-encryption
!
hostname ******
!
logging buffered 8192 debugging
enable secret 5 <removed>
!
username ***** password 7 <removed>
!
!
!
!
ip subnet-zero
no ip source-route
!
ip dhcp pool DHCPPoolLAN_0
network 192.168.0.0 255.255.255.0
dns-server 145.253.2.11 145.253.2.75
default-router 192.168.0.1
!
ip name-server 145.253.2.11
ip name-server 145.253.2.75
isdn switch-type basic-net3
!
!
process-max-time 200
!
interface Ethernet0
ip address 192.168.0.1 255.255.255.0
ip access-group 121 in
no ip directed-broadcast
no ip proxy-arp
ip nat inside
!
interface BRI0
no ip address
no ip directed-broadcast
encapsulation ppp
dialer pool-member 1
isdn switch-type basic-net3
ppp authentication chap pap callin
!
interface Dialer1
description ISP
ip address negotiated
ip access-group 121 in
no ip directed-broadcast
no ip proxy-arp
ip nat outside
encapsulation ppp
no ip split-horizon
dialer remote-name Cisco1
dialer idle-timeout 60
dialer string 01920785 class DialClass
dialer hold-queue 10
dialer pool 1
dialer-group 1
ppp authentication chap pap callin
ppp chap hostname *****
ppp chap password *****
ppp pap sent-username ***** password *****
!
ip nat inside source list 18 interface Dialer1 overload
no ip http server
ip classless
ip route 0.0.0.0 0.0.0.0 Dialer1
!
!
map-class dialer DialClass
dialer isdn short-hold 120
access-list 18 permit 192.168.0.0 0.0.0.255
access-list 121 deny udp any eq netbios-dgm any
access-list 121 deny udp any eq netbios-ns any
access-list 121 deny udp any eq netbios-ss any
access-list 121 deny tcp any eq 137 any
access-list 121 deny tcp any eq 138 any
access-list 121 deny tcp any eq 139 any
access-list 121 permit ip any any time-range TIME
dialer-list 1 protocol ip permit
!
line con 0
exec-timeout 120 0
transport input none
stopbits 1
line vty 0 4
exec-timeout 0 0
login local
!
time-range TIME
periodic daily 0:00 to 23:59
!
end
Beim ersten Router dacht ich es ist ein Hardware-Fehler
da der zweite jedoch die gleichen Symtome zeigt kann es wohl kein Hardwaredefekt sein
Was mache ich falsch ??