Danke für die prompte Antwort! Ich bin leider nicht gleich zum Antworten gekommen.
Ja, der Config-Maker macht nicht allzuviel. Aber das mit der Flatrate ist im Moment nicht so wichtig. Das Teil soll überhaupt erstmal funktionieren.
Okay, dann hier mal die Config:
Current configuration:
!
version 12.0
hostname Cisco803
!
pots country DE
ip subnet-zero
!
isdn switch-type basic-net3
isdn voice-call-failure 0
!
interface Ethernet0
ip address *.*.*.* 255.255.255.0
no ip directed-broadcast
ip nat inside
!
interface BRI0
no ip address
no ip directed-broadcast
ip nat outside
encapsulation ppp
dialer rotary-group 1
isdn switch-type basic-net3
no cdp enable
!
interface Dialer1
ip address negotiated
no ip directed-broadcast
ip nat outside
encapsulation ppp
no ip split-horizon
dialer in-band
dialer string 008005355678
dialer-group 1
no cdp enable
ppp authentication ms-chap chap pap
ppp chap hostname *****
ppp chap password 7 ***
ppp pap sent-username ***** password 7 ***
!
router rip
version 2
network *.*.*.*
no auto-summary
!
ip nat inside source list 2 interface Dialer1 overload
ip classless
ip route 0.0.0.0 0.0.0.0 Dialer1
!
dialer-list 1 protocol ip permit
!
end
Ich denke, das Wichtigste von deb ppp xxx ist:
00:23:02: BR0:2 LCP: State is Open
00:23:02: BR0:2 PPP: Phase is AUTHENTICATING, by both
00:23:02: BR0:2 CHAP: Using alternate hostname *****
00:23:02: BR0:2 MS-CHAP: O CHALLENGE id 34 len 26 from "*****"
00:23:02: BR0:2 CHAP: I CHALLENGE id 10 len 29 from "jellocom"
00:23:02: BR0:2 CHAP: Using alternate hostname *****
00:23:02: BR0:2 CHAP: O RESPONSE id 10 len 34 from "*****"
00:23:02: BR0:2 CHAP: I SUCCESS id 10 len 4
00:23:02: BR0:2 LCP: I TERMREQ [Open] id 141 len 4
00:23:02: BR0:2 LCP: O TERMACK [Open] id 141 len 4
00:23:02: BR0:2 PPP: Phase is TERMINATING
00:23:8589934592: %LINK-3-UPDOWN: Interface BRI0:2, changed state to down
00:23:8589934592: BR0:2 LCP: State is Closed
00:23:8596229060: BR0:2 PPP: Phase is DOWN
Und jetzt deb isdn events:
00:28:33: ISDN BR0: Outgoing call id = 0x802A, dsl 0
00:28:33: ISDN BR0: Event: Call to 008005355678 at 64 Kb/s
00:28:33: ISDN BR0: process_bri_call(): call id 0x802A, called_number 008005355678, speed 64, c
all type DATA
00:28:141733961728: CC_CHAN_GetIdleChanbri: dsl 0
00:28:141733961728: Found idle channel B1
00:28:141740215428: ISDN BR0: received HOST_INFORMATION call_id 0x802A
00:28:146028929024: ISDN Event: dsl 0 call_id 0x802A B channel assigned by switch 1
ISDN BR0: received HOST_CONNECT call_id 0x802A
00:28:146028888076: %LINK-3-UPDOWN: Interface BRI0:2, changed state to up
00:28:146028888128: %ISDN-6-CONNECT: Interface BRI0:2 is now connected to 008005355678
00:28:146035182636: ISDN BR0: Event: Connected to 008005355678 on B2 at 64 Kb/s
00:28:150323855359: ISDN BR0: received HOST_FACILITY_INVOKE call_id 0x802A
Cause i = 0x8090 - Normal call clearing
00:28:146028929024: Facility i = 0x91A113020200A5020122300AA1053003020100820101
00:28:146028929024: - ETSI Supplementary Service, Invoke, AOC-D Charging Units: 0
00:28:146035182724: ISDN BR0: received HOST_DISCONNECT call_id 0x802A
00:28:146028888064: ISDN BR0: Event: Call to <unknown> was hung up.
00:28:146035182596: ISDN BR0: process_disc_ack(): call id 0x802A, ces 1, call type DATA
00:28:150323855359: %LINK-3-UPDOWN: Interface BRI0:2, changed state to down
00:28:146035182636: ISDN BR0: received HOST_DISCONNECT_ACK call_id 0x802A
00:28:146028888064: ISDN BR0: HOST_DISCONNECT_ACK: call type is DATA