Duinkonijn

Hi, Ich habe ein probleem mit der dail-in auf ein windows 2000 active directory server mit isdn Ich gebrauge ein Cisco 1603 isdn router fur der dial-in wie mag ich der server kenbar auf welche domain ich muchte anmelden. ich habe probiert: domain\username aber das arbeited nicht. mit ein std gekonfigurierte nt 4.0 dial in habe ich kein problemen benutser : klaas Domain : citrix ---------------------------------------------------------- sh run Building configuration... Current configuration: ! version 11.2 no service udp-small-servers no service tcp-small-servers ! hostname citrix ! enable secret 5 12345 ! ip domain-name citrix isdn switch-type basic-net3 ! interface Ethernet0 ip address 192.168.0.90 255.255.255.0 no ip directed-broadcast ! interface BRI0 ip unnumbered Ethernet0 no ip directed-broadcast encapsulation ppp no keepalive dialer idle-timeout 300 dialer enable-timeout 2 dialer string 12344 dialer hold-queue 20 dialer load-threshold 30 either dialer-group 1 no fair-queue no cdp enable ppp quality 50 ppp authentication pap callin ppp pap sent-username citrix\klaas password 7 022B****011D71 ppp multilink ! interface Dialer1 no ip address no cdp enable ! ip classless ip route 0.0.0.0 0.0.0.0 BRI0 dialer-list 1 protocol ip permit ! line con 0 password switch line vty 0 password switch login line vty 1 4 login ! end citrix# ---------------------------------------------------------- test: ---------------------------------------------------------- citrix#ping 10.2.1.5 Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 10.2.1.5, timeout is 2 seconds: .... %LINK-3-UPDOWN: Interface BRI0:2, changed state to up %LINK-3-UPDOWN: Interface BRI0:2, changed state to down. Success rate is 0 percent (0/5) citrix# %LINK-3-UPDOWN: Interface BRI0:1, changed state to up %ISDN-6-CONNECT: Interface BRI0:1 is now connected to 12344 ping 10.2.1.5^@ Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 10.2.1.5, timeout is 2 seconds: ... %ISDN-6-DISCONNECT: Interface BRI0:1 disconnected from 12344 , call lasted 17 seconds. %LINK-3-UPDOWN: Interface BRI0:1, changed state to down %LINK-3-UPDOWN: Interface BRI0:2, changed state to up %LINK-3-UPDOWN: Interface BRI0:2, changed state to down. Success rate is 0 percent (0/5) citrix#