Routen klappt nur ein wenig

[Stadt-Tiger 10]

Und hier debug von q931

 

*Mar 1 18:12:40.515: ISDN BR1/0 **ERROR**: host_incoming_call: DIALER ERROR 0x1

: b channel 0, call id 0x73

*Mar 1 18:12:40.519: ISDN BR1/0 EVENT: process_rxstate: ces/callid 1/0x73 callt

ype 1 HOST_DISCONNECT_ACK

*Mar 1 18:12:40.523: ISDN BR1/0 Q931: TX -> RELEASE_COMP pd = 8 callref = 0xCD

 

Cause i = 0x8095 - Call rejected

*Mar 1 18:12:41.973: ISDN BR1/0 Q931: RX <- BAD PACKET()

*Mar 1 18:12:43.476: ISDN BR1/0 Q931: RX <- BAD PACKET()

*Mar 1 18:12:45.311: ISDN BR1/0 Q931: RX <- BAD PACKET()

*Mar 1 18:12:45.335: ISDN BR1/0 Q931: RX <- SETUP pd = 8 callref = 0x4E

Bearer Capability i = 0x8890

Standard = CCITT

Transfer Capability = Unrestricted Digital

Transfer Mode = Circuit

Transfer Rate = 64 kbit/s

Channel ID i = 0x8A

Calling Party Number i = 0x0080, '0123'

Plan:Unknown, Type:Unknown

Called Party Number i = 0x81, '3'

Plan:ISDN, Type:Unknown

Sending Complete

*Mar 1 18:12:45.339: ISDN BR1/0 EVENT: process_rxstate: ces/callid 1/0x74 callt

ype 1 HOST_INCOMING_CALL

*Mar 1 18:12:45.343: ISDN BR1/0 **ERROR**: host_incoming_call: DIALER ERROR 0x1

: b channel 1, call id 0x74

*Mar 1 18:12:45.347: ISDN BR1/0 EVENT: process_rxstate: ces/callid 1/0x74 callt

ype 1 HOST_DISCONNECT_ACK

*Mar 1 18:12:45.347: ISDN BR1/0 Q931: TX -> RELEASE_COMP pd = 8 callref = 0xCE

 

Cause i = 0x8095 - Call rejected

*Mar 1 18:12:46.793: ISDN BR1/0 Q931: RX <- BAD PACKET()

*Mar 1 18:12:48.296: ISDN BR1/0 Q931: RX <- BAD PACKET()

*Mar 1 18:12:50.167: ISDN BR1/2 Q931: RX <- BAD PACKET()

*Mar 1 18:12:50.187: ISDN BR1/2 Q931: RX <- SETUP pd = 8 callref = 0x4D

Bearer Capability i = 0x8890

Standard = CCITT

Transfer Capability = Unrestricted Digital

Transfer Mode = Circuit

Transfer Rate = 64 kbit/s

Channel ID i = 0x89

Calling Party Number i = 0x0080, '0123'

Plan:Unknown, Type:Unknown

Called Party Number i = 0x81, '2'

Plan:ISDN, Type:Unknown

Sending Complete

*Mar 1 18:12:50.195: ISDN BR1/2 EVENT: process_rxstate: ces/callid 1/0x75 callt

ype 1 HOST_INCOMING_CALL

*Mar 1 18:12:50.199: ISDN BR1/2 **ERROR**: host_incoming_call: DIALER ERROR 0x1

: b channel 0, call id 0x75

*Mar 1 18:12:50.199: ISDN BR1/2 EVENT: process_rxstate: ces/callid 1/0x75 callt

ype 1 HOST_DISCONNECT_ACK

*Mar 1 18:12:50.203: ISDN BR1/2 Q931: TX -> RELEASE_COMP pd = 8 callref = 0xCD

 

Cause i = 0x8095 - Call rejected

*Mar 1 18:12:51.653: ISDN BR1/2 Q931: RX <- BAD PACKET()

*Mar 1 18:12:53.156: ISDN BR1/2 Q931: RX <- BAD PACKET()

*Mar 1 18:12:55.011: ISDN BR1/2 Q931: RX <- BAD PACKET()

*Mar 1 18:12:55.031: ISDN BR1/2 Q931: RX <- SETUP pd = 8 callref = 0x4E

Bearer Capability i = 0x8890

Standard = CCITT

Transfer Capability = Unrestricted Digital

Transfer Mode = Circuit

Transfer Rate = 64 kbit/s

Channel ID i = 0x8A

Calling Party Number i = 0x0080, '0123'

Plan:Unknown, Type:Unknown

Called Party Number i = 0x81, '3'

Plan:ISDN, Type:Unknown

Sending Complete

[Stadt-Tiger 10]

.

.

.

*Mar 1 18:13:58.771: ISDN BR1/1 EVENT: process_rxstate: ces/callid 1/0x83 callt

ype 1 HOST_INCOMING_CALL

*Mar 1 18:13:58.775: ISDN BR1/1 **ERROR**: host_incoming_call: DIALER ERROR 0x1

: b channel 0, call id 0x83

*Mar 1 18:13:58.779: ISDN BR1/1 EVENT: process_rxstate: ces/callid 1/0x83 callt

ype 1 HOST_DISCONNECT_ACK

*Mar 1 18:13:58.783: ISDN BR1/1 Q931: TX -> RELEASE_COMP pd = 8 callref = 0xCD

 

Cause i = 0x8095 - Call rejected

*Mar 1 18:14:00.238: ISDN BR1/1 Q931: RX <- BAD PACKET()

*Mar 1 18:14:01.736: ISDN BR1/1 Q931: RX <- BAD PACKET()

*Mar 1 18:14:14.705: ISDN BR1/0 EVENT: UserIdle: callid 0x8009 received ISDN_HA

NGUP (0x1)

*Mar 1 18:14:14.705: ISDN BR1/0 **ERROR**: CCBRI_Go: NO CCB Src->HOST call id 0

x8009, event 0x5 ces 1

*Mar 1 18:14:14.705: ISDN BR1/0 EVENT: process_rxstate: ces/callid 1/0x8009 cal

[rob_67 10]

aber ein dialer events hast du jetzt noch nicht angehabt, versuch mal bitte ein deb isdn events + debug dialer events und schick nochmal ein sh int bri0 mit

[Stadt-Tiger 10]

BRI1/0 is up, line protocol is up (spoofing)

Hardware is BRI

Description: Verbindung Dialer 1

MTU 1500 bytes, BW 64 Kbit, DLY 20000 usec,

reliability 255/255, txload 1/255, rxload 1/255

Encapsulation PPP, loopback not set

Keepalive set (10 sec)

DTR is pulsed for 1 seconds on reset

Last input 00:00:07, output 00:00:07, output hang never

Last clearing of "show interface" counters 19:03:07

Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0

Queueing strategy: weighted fair

Output queue: 0/1000/64/0 (size/max total/threshold/drops)

Conversations 0/1/16 (active/max active/max total)

Reserved Conversations 0/0 (allocated/max allocated)

Available Bandwidth 48 kilobits/sec

5 minute input rate 0 bits/sec, 0 packets/sec

5 minute output rate 0 bits/sec, 0 packets/sec

8762 packets input, 39588 bytes, 0 no buffer

Received 0 broadcasts, 0 runts, 0 giants, 0 throttles

0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort

8606 packets output, 34842 bytes, 0 underruns

0 output errors, 0 collisions, 0 interface resets

0 output buffer failures, 0 output buffers swapped out

1 carrier transitions

[Stadt-Tiger 10]

*Mar 1 19:04:52.405: ISDN BR1/1 Q931: RX <- BAD PACKET()

*Mar 1 19:04:52.425: ISDN BR1/1 Q931: RX <- SETUP pd = 8 callref = 0x4D

Bearer Capability i = 0x8890

Standard = CCITT

Transfer Capability = Unrestricted Digital

Transfer Mode = Circuit

Transfer Rate = 64 kbit/s

Channel ID i = 0x8A

Calling Party Number i = 0x0080, '0123'

Plan:Unknown, Type:Unknown

Called Party Number i = 0x81, '3'

Plan:ISDN, Type:Unknown

Sending Complete

*Mar 1 19:04:52.429: ISDN BR1/1 EVENT: process_rxstate: ces/callid 1/0x84 callt

ype 1 HOST_INCOMING_CALL

*Mar 1 19:04:52.433: Di1 DDR: Caller id: Callback server starting to xxx 0123

*Mar 1 19:04:52.433: Could not obtain author data from the previous call

*Mar 1 19:04:52.437: ISDN BR1/1 **ERROR**: host_incoming_call: DIALER ERROR 0x1

: b channel 1, call id 0x84

*Mar 1 19:04:52.437: ISDN BR1/1 EVENT: process_rxstate: ces/callid 1/0x84 callt

ype 1 HOST_DISCONNECT_ACK

*Mar 1 19:04:52.441: ISDN BR1/1 Q931: TX -> RELEASE_COMP pd = 8 callref = 0xCD

 

Cause i = 0x8095 - Call rejected

*Mar 1 19:04:53.895: ISDN BR1/1 Q931: RX <- BAD PACKET()

*Mar 1 19:04:55.394: ISDN BR1/1 Q931: RX <- BAD PACKET()

*Mar 1 19:04:57.229: ISDN BR1/0 Q931: RX <- BAD PACKET()

*Mar 1 19:04:57.249: ISDN BR1/0 Q931: RX <- SETUP pd = 8 callref = 0x4E

Bearer Capability i = 0x8890

Standard = CCITT

Transfer Capability = Unrestricted Digital

Transfer Mode = Circuit

Transfer Rate = 64 kbit/s

Channel ID i = 0x89

Calling Party Number i = 0x0080, '0123'

Plan:Unknown, Type:Unknown

Called Party Number i = 0x81, '2'

Plan:ISDN, Type:Unknown

Sending Complete

[Stadt-Tiger 10]

*Mar 1 19:04:57.257: ISDN BR1/0 EVENT: process_rxstate: ces/callid 1/0x85 callt

ype 1 HOST_INCOMING_CALL

*Mar 1 19:04:57.257: Di1 DDR: callback to xxx already started

*Mar 1 19:04:57.257: Could not obtain author data from the previous call

*Mar 1 19:04:57.261: ISDN BR1/0 **ERROR**: host_incoming_call: DIALER ERROR 0x1

: b channel 0, call id 0x85

*Mar 1 19:04:57.261: ISDN BR1/0 EVENT: process_rxstate: ces/callid 1/0x85 callt

ype 1 HOST_DISCONNECT_ACK

*Mar 1 19:04:57.265: ISDN BR1/0 Q931: TX -> RELEASE_COMP pd = 8 callref = 0xCE

 

Cause i = 0x8095 - Call rejected

*Mar 1 19:04:58.715: ISDN BR1/0 Q931: RX <- BAD PACKET()

*Mar 1 19:05:00.214: ISDN BR1/0 Q931: RX <- BAD PACKET()

*Mar 1 19:05:02.041: ISDN BR1/0 Q931: RX <- BAD PACKET()

*Mar 1 19:05:02.061: ISDN BR1/0 Q931: RX <- SETUP pd = 8 callref = 0x4D

Bearer Capability i = 0x8890

Standard = CCITT

Transfer Capability = Unrestricted Digital

Transfer Mode = Circuit

Transfer Rate = 64 kbit/s

Channel ID i = 0x8A

Calling Party Number i = 0x0080, '03139630'

Plan:Unknown, Type:Unknown

Called Party Number i = 0x81, '3'

Plan:ISDN, Type:Unknown

Sending Complete

[rob_67 10]

also ich werd nicht so richtig schlau aus der ganzen geschichte, ich würde einfach mal ein anderes ios, wenn verfügbar, probieren

[Stadt-Tiger 10]

Hallo Rob,

 

leider habe ich kein weiteres IOS.

 

Liebe Grüße

[rob_67 10]

Hallo Stadt Tiger, wie ist den jetzt der Stand, geht es sporadisch, dauert es sehr lange für den Verbindungsaufbau oder geht es gar nicht mehr?

[Stadt-Tiger 10]

Hallo Rob,

 

es geht jetzt garnicht mehr. :(

 

Liebe Grüße

[rob_67 10]

boot doch mal den router, wenns dann wieder geht, wäre ein neues ios schon sinnvoll

[Stadt-Tiger 10]

Neu gestartet habe ich den Router bereits und einwählen kann man sich, wenn man nicht gerade in einer der externen Stellen sitzt. Aber ich habe zum Glück gestern demonstriert, dass es läuft...