Jump to content

DiggeHose

Members
 Profil anzeigen  Aktivitäten des Benutzers anzeigen

  • Gesamte Inhalte

    4

  • Registriert seit

  • Letzter Besuch

 Inhaltstyp 

Beiträge erstellt von DiggeHose

  1. C1116-4P richtige config für Anfänger

    in Cisco Forum — Allgemein

    Geschrieben

    Hallo Forenmitglieder,

     

    ich habe mich durch die Anleitung auf administrator.de gearbeitet.

    Mir ist aber eine Sache unklar: in der Anleitung steht unter aaa  

    aaa authorization network default local

    aber diese Option habe ich nicht: 

    Cisco_C1116-4P(config)#aaa authentication ?
  arap             Set authentication lists for arap.
  attempts         Set the maximum number of authentication attempts
  banner           Message to use when starting login/authentication.
  dot1x            Set authentication lists for IEEE 802.1x.
  enable           Set authentication list for enable.
  eou              Set authentication lists for EAPoUDP
  fail-message     Message to use for failed login/authentication.
  local-override   Local accounts always get checked first.
  login            Set authentication lists for logins.
  onep             Set authentication lists for ONEP
  password-prompt  Text to use when prompting for a password
  ppp              Set authentication lists for ppp.
  rejected         Set blocking action for failed logins
  sgbp             Set authentication lists for sgbp.
  suppress         Do not send access request for a specific type of user.
  username-prompt  Text to use when prompting for a username
  webauth          set authentication lists for Webauth

    was kann ich tun?

    Vermutlich kann ich mich deshalb auch auf dem GUI nicht anmelden, oder?

     

    Danke für eure Hilfe.

     

    Beste Grüße

  4. C1116-4P richtige config für Anfänger

    in Cisco Forum — Allgemein

    Geschrieben

    Guten Tag liebe Forenmitglieder,

     

    aus Spaß an der Sache habe ich mir einen Cisco C1116-4P-Router gebraucht gekauft und möchte meinen Lancom 1781VAW damit ersetzen.

    Ich habe verschiedene Anleitungen im Netz gefunden, und der Router meldet sich erfolgreich beim ISP an.

    Mir fehlt jetzt noch der Hinweis, was ich konfigurieren muss, damit ich Internet im LAN habe,

    Zunächst ohne Portforwarding, Firewall, o.ä.

    Unten stehen verschiedene 'show'-Ausgaben.

    Vielen Dank vorweg, für eure Hilfe und beste Grüße.

     

     


    Cisco_C1116-4P#ena
    Cisco_C1116-4P#show running-config
    Building configuration...


    Current configuration : 6930 bytes
    !
    ! Last configuration change at 17:00:32 UTC Mon Mar 17 2025
    !
    version 16.9
    service timestamps debug datetime msec
    service timestamps log datetime msec
    service internal
    ! Call-home is enabled by Smart-Licensing.
    service call-home
    platform qfp utilization monitor load 80
    no platform punt-keepalive disable-kernel-core
    !
    hostname Cisco_C1116-4P
    !
    boot-start-marker
    boot-end-marker
    !
    !
    !
    no aaa new-model
    call-home
     ! If contact email address in call-home is configured as sch-smart-licensing@cisco.com
     ! the email address configured in Cisco Smart License Portal will be used as contact email address to send SCH notifications.
     contact-email-addr sch-smart-licensing@cisco.com
     profile "CiscoTAC-1"
      active
      destination transport-method http
      no destination transport-method email
    !
    !
    !
    ip dhcp excluded-address 192.168.100.0 192.168.100.19
    ip dhcp excluded-address 192.168.100.201 192.168.100.255
    !
    ip dhcp pool LAN
     network 192.168.100.0 255.255.255.0
     default-router 192.168.100.12
     dns-server 192.168.100.12 8.8.8.8
     lease infinite
    !
    !
    !
    !
    !
    !
    !
    !
    !
    !
    subscriber templating
    vtp domain de-bfw-hambur-ce-14
    vtp mode transparent
    !
    !
    multilink bundle-name authenticated
    !
    !
    !
    crypto pki trustpoint TP-self-signed-1305543871
     enrollment selfsigned
     subject-name cn=IOS-Self-Signed-Certificate-1305543871
     revocation-check none
     rsakeypair TP-self-signed-1305543871
    !
    crypto pki trustpoint SLA-TrustPoint
     enrollment pkcs12
     revocation-check crl
    !
    !
    crypto pki certificate chain TP-self-signed-1305543871
     certificate self-signed 01
      30820330 30820218 A0030201 02020101 300D0609 2A864886 F70D0101 05050030
      31312F30 2D060355 04031326 494F532D 53656C66 2D536967 6E65642D 43657274
    ...
      27AE70F6 F8A7458E CC231A14 977E54C3 F124CDA5 A3F94016 12150F29 DA4F17B4
      59F45804 7497F3F2 79D3BAB2 F55FDD3C DB6262FA 82A73FA0 27FAF515 3360B837
      299B04B1 D93E53BD C3073F2F 047F7517 7E6BB978
            quit
    crypto pki certificate chain SLA-TrustPoint
     certificate ca 01
      30820321 30820209 A0030201 02020101 300D0609 2A864886 F70D0101 0B050030
      32310E30 0C060355 040A1305 43697363 6F312030 1E060355 04031317 43697363
    ...
      80DDCD16 D6BACECA EEBC7CF9 8428787B 35202CDC 60E4616A B623CDBD 230E3AFB
      418616A9 4093E049 4D10AB75 27E86F73 932E35B5 8862FDAE 0275156F 719BB2F0
      D697DF7F 28
            quit
    !
    license udi pid C1116-4P sn FCZ2424C14Z
    license smart enable
    license smart conversion automatic
    !
    diagnostic bootup level minimal
    !
    spanning-tree extend system-id
    !
    !
    username ... privilege 15 password 0 ...
    !
    redundancy
     mode none
    !
    controller VDSL 0/2/0
    !
    !
    vlan internal allocation policy ascending
    !
    vlan 10
     name Management
    !
    !
    !
    !
    !
    !
    interface Loopback1
     description standart
     no ip address
    !
    interface GigabitEthernet0/0/0
     no ip address
     negotiation auto
    !
    interface GigabitEthernet0/1/0
     description LAN
    !
    interface GigabitEthernet0/1/1
    !
    interface GigabitEthernet0/1/2
    !
    interface GigabitEthernet0/1/3
    !
    interface ATM0/2/0
     no ip address
     atm oversubscribe factor 2
     no atm enable-ilmi-trap
     pvc 1/32
      encapsulation aal5mux ppp dialer
      dialer pool-member 1
     !
    !
    interface Ethernet0/2/0
     no ip address
     ip nat inside
     no negotiation auto
    !
    interface Vlan1
     description LAN
     ip address 192.168.100.12 255.255.255.0
    !
    interface Dialer1
     ip address dhcp
     encapsulation ppp
     dialer pool 1
     ppp chap hostname 0025...90001@t-online.de
     ppp chap password 0 1...4
     ppp pap sent-username 0025...0001@t-online.de password 0 1...4
    !
    ip nat inside source list 1 interface Dialer1 overload
    ip forward-protocol nd
    ip http server
    ip http authentication local
    ip http secure-server
    ip route 0.0.0.0 0.0.0.0 Dialer1
    !
    !
    access-list 1 permit any
    !
    !
    !
    !
    control-plane
    !
    !
    line con 0
     transport input none
     stopbits 1
    line vty 0 4
     login
    !
    !
    !
    !
    !
    !
    end

    Cisco_C1116-4P#show int
    Cisco_C1116-4P#show interfaces atm 0/2/0
    ATM0/2/0 is down, line protocol is down
      Hardware is C1116-VADSL-BJ, address is f86b.d984.da10 (bia f86b.d984.da10)
      MTU 1800 bytes, sub MTU 1800, BW 25000 Kbit/sec, DLY 100 usec,
         reliability 255/255, txload 1/255, rxload 1/255
      Encapsulation ATM, loopback not set
      Keepalive not supported
      Encapsulation(s): AAL5
      8 maximum active VCs, 0 current VCCs
      ATM Dynamic Bandwidth Enabled.
      VC Auto Creation Disabled.
      VC idle disconnect time: 300 seconds
      1 carrier transitions
      Last input never, output never, output hang never
      Last clearing of "show interface" counters never
      Input queue: 0/375/0/0 (size/max/drops/flushes); Total output drops: 0
      Queueing strategy: fifo
      Output queue: 0/40 (size/max)
      5 minute input rate 0 bits/sec, 0 packets/sec
      5 minute output rate 0 bits/sec, 0 packets/sec
         0 packets input, 0 bytes, 0 no buffer
         Received 0 broadcasts (0 IP multicasts)
         0 runts, 0 giants, 0 throttles
         0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
         0 packets output, 0 bytes, 0 underruns
         0 output errors, 0 collisions, 0 interface resets
         0 unknown protocol drops
         0 output buffer failures, 0 output buffers swapped out
    Cisco_C1116-4P#show ip int
    Cisco_C1116-4P#show ip interface brief
    Interface              IP-Address      OK? Method Status                Protocol
    GigabitEthernet0/0/0   unassigned      YES unset  down                  down
    GigabitEthernet0/1/0   unassigned      YES unset  up                    up
    GigabitEthernet0/1/1   unassigned      YES unset  down                  down
    GigabitEthernet0/1/2   unassigned      YES unset  down                  down
    GigabitEthernet0/1/3   unassigned      YES unset  down                  down
    ATM0/2/0               unassigned      YES unset  down                  down
    Ethernet0/2/0          unassigned      YES unset  up                    up
    Dialer1                unassigned      YES DHCP   up                    up
    Loopback1              unassigned      YES unset  up                    up
    Virtual-Access1        unassigned      YES unset  up                    up
    Vlan1                  192.168.100.12  YES manual up                    up
    Cisco_C1116-4P#show controllers vdsl 0/2/0
    Controller VDSL 0/2/0 is UP

    Daemon Status:          UP

                            XTU-R (DS)              XTU-C (US)
    Chip Vendor ID:         'BDCM'                   'BDCM'
    Chip Vendor Specific:   0x0000                   0xB221
    Chip Vendor Country:    0xB500                   0xB500
    Modem Vendor ID:        'CSCO'                   '    '
    Modem Vendor Specific:  0x4602                   0x0000
    Modem Vendor Country:   0xB500                   0x0000
    Serial Number Near:     FCZ2424C14Z C1116-4P 16.9.2
    Serial Number Far:
    Modem Version Near:     16.9.2
    Modem Version Far:      0xb221

    Modem Status:           TC Sync (Showtime!)
    DSL Config Mode:        AUTO
    Trained Mode:           G.993.2 (VDSL2) Profile 17a

    TC Mode:                PTM
    Selftest Result:        0x00
    DELT configuration:     disabled
    DELT state:             not running

    Failed full inits:      0
    Short inits:            0
    Failed short inits:     0

    Modem FW  Version:      4.14L.04
    Modem PHY Version:      B2pv6F039g1.d26d
    Modem PHY Source:       System

    Line 0:

                            XTU-R (DS)              XTU-C (US)
    Trellis:                 ON                      ON
    SRA:                     enabled                 enabled
    SRA count:               0                       0
    Bit swap:                enabled                 enabled
    Bit swap count:          2                       1
    Line Attenuation:         9.5 dB                  0.0 dB
    Signal Attenuation:       0.0 dB                  0.0 dB
    Noise Margin:            25.6 dB                15.7 dB
    Attainable Rate:        133137 kbits/s           47197 kbits/s
    Actual Power:           14.3 dBm                - 2.6 dBm
    Per Band Status:        D1      D2      D3      U0      U1      U2      U3
    Line Attenuation(dB):   5.6     11.5    15.4    2.9     7.9     11.1    N/A
    Signal Attenuation(dB): 4.8     11.4    15.4    2.9     7.5     10.1    N/A
    Noise Margin(dB):       25.3    25.8    25.8    15.7    15.9    15.7    N/A
    Total FECC:             1218836                  45733
    Total ES:               422                      24
    Total SES:              171                      12
    Total LOSS:             5                        0
    Total UAS:              1108157                  1108115
    Total LPRS:             0                        0
    Total LOFS:             8                        0
    Total LOLS:             0                        0


                      DS Channel1     DS Channel0   US Channel1       US Channel0
    Speed (kbps):             NA           63679            NA             32000
    SRA Previous Speed:       NA               0            NA                 0
    Previous Speed:           NA           63679            NA             23360
    Reed-Solomon EC:          NA               0            NA                 0
    CRC Errors:               NA            7921            NA               110
    Header Errors:            NA               0            NA                 0
    Interleave (ms):          NA            0.00            NA              0.00
    Actual INP:               NA           76.00            NA             44.00

    Training Log :  Stopped
    Training Log Filename : flash:vdsllog.bin

    Cisco_C1116-4P#show int
    Cisco_C1116-4P#show interfaces dialer 1
    Dialer1 is up (spoofing), line protocol is up (spoofing)
      Hardware is Unknown
      Internet address will be negotiated using DHCP
      MTU 1492 bytes, BW 56 Kbit/sec, DLY 20000 usec,
         reliability 255/255, txload 1/255, rxload 1/255
      Encapsulation PPP, LCP Closed, loopback not set
      Keepalive set (10 sec)
      DTR is pulsed for 1 seconds on reset
      Last input never, output 4d22h, output hang never
      Last clearing of "show interface" counters 6d06h
      Input queue: 0/375/0/0 (size/max/drops/flushes); Total output drops: 0
      Queueing strategy: weighted fair
      Output queue: 0/1000/64/0 (size/max total/threshold/drops)
         Conversations  0/0/16 (active/max active/max total)
         Reserved Conversations 0/0 (allocated/max allocated)
         Available Bandwidth 42 kilobits/sec
      5 minute input rate 0 bits/sec, 0 packets/sec
      5 minute output rate 0 bits/sec, 0 packets/sec
         0 packets input, 0 bytes
         0 packets output, 0 bytes
    Cisco_C1116-4P#

     

×
×
  • Neu erstellen...