Jump to content

sebastian.f

Members
 Profil anzeigen  Aktivitäten des Benutzers anzeigen

  • Gesamte Inhalte

    132

  • Registriert seit

  • Letzter Besuch

 Inhaltstyp 

Beiträge erstellt von sebastian.f

  1. Cisco 3020 Blade Switch Crashed

    in Cisco Forum — Allgemein

    Geschrieben

    Hallo,

     

    habe in letzter Zeit öfter das Problem das mir ein Blade Switch crashed. Hat einer eine Idee warum:

     

    000053: .Jul 22 09:54:27: %PLATFORM-1-CRASHED: System previously crashed with the following message:
    000054: .Jul 22 09:54:27: %PLATFORM-1-CRASHED: Cisco IOS Software, CBS30X0 Software (CBS30X0-LANBASE-M), Version 12.2(25)SEF1, RELEASE SOFTWARE (fc3)
    000055: .Jul 22 09:54:27: %PLATFORM-1-CRASHED: Copyright © 1986-2006 by Cisco Systems, Inc.
    000056: .Jul 22 09:54:27: %PLATFORM-1-CRASHED: Compiled Tue 23-May-06 15:26 by antonino
    000057: .Jul 22 09:54:27: %PLATFORM-1-CRASHED:
    000058: .Jul 22 09:54:27: %PLATFORM-1-CRASHED: Debug Exception (Could be NULL pointer dereference) Exception (0x2000)!
    000059: .Jul 22 09:54:27: %PLATFORM-1-CRASHED:
    000060: .Jul 22 09:54:27: %PLATFORM-1-CRASHED: SRR0 = 0x00A84298  SRR1 = 0x00029210  SRR2 = 0x00451BDC  SRR3 = 0x00021000
    000061: .Jul 22 09:54:27: %PLATFORM-1-CRASHED: ESR = 0x00000000  DEAR = 0x00000000  TSR = 0x84000000  DBSR = 0x10000000
    000062: .Jul 22 09:54:27: %PLATFORM-1-CRASHED:
    000063: .Jul 22 09:54:27: %PLATFORM-1-CRASHED: CPU Register Context:
    000064: .Jul 22 09:54:27: %PLATFORM-1-CRASHED: Vector = 0x00002000  PC = 0x00A85008  MSR = 0x00029210  CR = 0x55555035
    000065: .Jul 22 09:54:27: %PLATFORM-1-CRASHED: LR = 0x00A84FA8  CTR = 0x004D989C  XER = 0xE0000004
    000066: .Jul 22 09:54:27: %PLATFORM-1-CRASHED: R0 = 0x00000001  R1 = 0x016FB268  R2 = 0x00000000  R3 = 0x016CD4D0
    000067: .Jul 22 09:54:27: %PLATFORM-1-CRASHED: R4 = 0x000000FC  R5 = 0x016FB1F0  R6 = 0x0000000C  R7 = 0x00000017
    000068: .Jul 22 09:54:27: %PLATFORM-1-CRASHED: R8 = 0x016FB1F0  R9 = 0x01220000  R10 = 0x0000000B  R11 = 0x00F60000
    000069: .Jul 22 09:54:27: %PLATFORM-1-CRASHED: R12 = 0x35555035  R13 = 0x00110000  R14 = 0x015A9DE8  R15 = 0x00E90000
    000070: .Jul 22 09:54:27: %PLATFORM-1-CRASHED: R16 = 0x00EA0000  R17 = 0x00E90000  R18 = 0x00000000  R19 = 0x00000000
    000071: .Jul 22 09:54:27: %PLATFORM-1-CRASHED: R20 = 0x00000000  R21 = 0x01340000  R22 = 0xFFFC06F0  R23 = 0x01220000
    000072: .Jul 22 09:54:27: %PLATFORM-1-CRASHED: R24 = 0x00000000  R25 = 0x01220000  R26 = 0x00000000  R27 = 0x2510AAA2
    000073: .Jul 22 09:54:27: %PLATFORM-1-CRASHED: R28 = 0x011B832C  R29 = 0x011B8328  R30 = 0x00000001  R31 = 0x00000000
    000074: .Jul 22 09:54:27: %PLATFORM-1-CRASHED:
    000075: .Jul 22 09:54:27: %PLATFORM-1-CRASHED: Stack trace:
    000076: .Jul 22 09:54:27: %PLATFORM-1-CRASHED: PC = 0x00A85008, SP = 0x016FB268
    000077: .Jul 22 09:54:27: %PLATFORM-1-CRASHED: Frame 00: SP = 0x016FB278    PC = 0x00A84FA8
    000078: .Jul 22 09:54:27: %PLATFORM-1-CRASHED: Frame 01: SP = 0x016FB2A0    PC = 0x0045372C
    000079: .Jul 22 09:54:27: %PLATFORM-1-CRASHED: Frame 02: SP = 0x016FB2A8    PC = 0x003C3958
    000080: .Jul 22 09:54:27: %PLATFORM-1-CRASHED: Frame 03: SP = 0x016FB2C8    PC = 0x004B9750
    000081: .Jul 22 09:54:27: %PLATFORM-1-CRASHED: Frame 04: SP = 0x0126264C    PC = 0x00451060
    000082: .Jul 22 09:54:27: %PLATFORM-1-CRASHED: Frame 05: SP = 0x0126265C    PC = 0x00451008
    000083: .Jul 22 09:54:27: %PLATFORM-1-CRASHED: Frame 06: SP = 0x0126267C    PC = 0x0045342C
    000084: .Jul 22 09:54:27: %PLATFORM-1-CRASHED: Frame 07: SP = 0x01262684    PC = 0x004538F8
    000085: .Jul 22 09:54:27: %PLATFORM-1-CRASHED: Frame 08: SP = 0x012626D0    PC = 0x00451110
    000086: .Jul 22 09:54:27: %PLATFORM-1-CRASHED: Frame 09: SP = 0x015A9DE0    PC = 0x00A84298
    000087: .Jul 22 09:54:27: %PLATFORM-1-CRASHED: Frame 10: SP = 0x015A9F60    PC = 0x00A822C8
    000088: .Jul 22 09:54:27: %PLATFORM-1-CRASHED: Frame 11: SP = 0xFFFFFFFF    PC = 0x00A7EF8C
    000089: .Jul 22 09:54:27: %PLATFORM-1-CRASHED:

     

    Danke!

  3. show mac-address-table

    in Cisco Forum — Allgemein

    Geschrieben

    Hallo,

     

    wir haben einen großen Teil unserer Access Switches durch 4500-e Series Switches mit IOS 15.0SG10 ersetzt.

    Jetzt ist mir aufgefallen das das Kommando show mac-address-table nicht mehr exisitiert.

    Gibt es eine andere Möglichkeite heraus zu finden welche MAC Adresse sich auf welchem Port meldet?

     

    danke Gruß

  4. Cisco APs und PoE

    in Cisco Forum — Allgemein

    Geschrieben

    Der Boot Log steht oben ich hab ihn nur gekürzt damit er hier rein passt. Die Aussage war ja schon, von blackboxx, das hier ein HW defekt vorliegt. Laut Cisco ist es auch so hab nen TAC aufgemacht... da gibts wohl ein Problem mit den Power Injektoren und normalen PoE Verbindungen genaueres konnten sie mir auch noch nicht sagen.

  7. Cisco APs und PoE

    in Cisco Forum — Allgemein

    Geschrieben

    Console Output:

     

    
00:00:08 UTC Fri Mar 1 2002: Unexpected exception to CPUvector 200, PC = 0x4F22
DC  , LR = 0x4F2D34

-Traceback= 0x4F22DC 0x4F2D34 0x4F3418 0x4DAC64 0x4DB06C 0x4D7DD4 0x19118C 0x191
240 0x57090 0x57398 0x1A5570

CPU Register Context:
MSR = 0x00029210  CR  = 0x24000028  CTR = 0x004DAB98  XER   = 0x00000000
R0  = 0x9400AE16  R1  = 0x01010530  R2  = 0x00000000  R3    = 0x01010650
R4  = 0x00000008  R5  = 0x01010660  R6  = 0x00000000  R7    = 0x01010648
R8  = 0x4B233FAE  R9  = 0x00000000  R10 = 0xBD912F2B  R11   = 0x0085774A
R12 = 0xA2B8BB80  R13 = 0x01000000  R14 = 0x00000000  R15   = 0x00000000
R16 = 0x00000000  R17 = 0x00000000  R18 = 0x00000000  R19   = 0x00000000
R20 = 0x00000000  R21 = 0x00000000  R22 = 0x00000000  R23   = 0x00000000
R24 = 0x00000000  R25 = 0x00000000  R26 = 0x00000000  R27   = 0x00A786E8
R28 = 0x01010660  R29 = 0x00000000  R30 = 0x01010658  R31   = 0x01010650


=== Flushing messages (00:00:09 UTC Fri Mar 1 2002) ===

Buffered messages:
Queued messages:
*Mar  1 00:00:09.451: %SYS-3-LOGGER_FLUSHING: System pausing to ensure console d
ebugging output.

*Mar  1 00:00:09.324: %SYS-4-PUPDATECLOCK: Periodic Clock update with ROMMON fai
led, because size left in ROMMON (4294967295), size needed (29), error code (-1)

Nested exception_rom_monitor call (2 times)


Unexpected exception to CPUvector 200, PC = 4F22DC
-Traceback= 0x4F22DC 0x4F2D34 0x4F3418 0x4DAC64 0x4DB06C 0x4D7DD4 0x19118C 0x191
240 0x57090 0x57398 0x1A5570

Exception (200)! Machine Check

ESR: 0x00000000, BESRA: 0x00000000, BESRB: 0x00000000, BEAR: 0xFFFFFFFF
MSR: 0x00020010, SRR2: x002954CC,   SRR3: 0x00020010

CPU Register Context:
Vector = 0x00000200  PC =  0x004F22DC  MSR = 0x00029210  CR =  0x24000028
LR =  0x004F2D34     CTR = 0x004DAB98  XER = 0x00000000
R0 =  0x9400AE16     R1 =  0x01010530  R2 =  0x00000000  R3 =  0x01010650
R4 =  0x00000008     R5 =  0x01010660  R6 =  0x00000000  R7 =  0x01010648
R8 =  0x4B233FAE     R9 =  0x00000000  R10 = 0xBD912F2B  R11 = 0x0085774A
R12 = 0xA2B8BB80     R13 = 0x01000000  R14 = 0x00000000  R15 = 0x00000000
R16 = 0x00000000     R17 = 0x00000000  R18 = 0x00000000  R19 = 0x00000000
R20 = 0x00000000     R21 = 0x00000000  R22 = 0x00000000  R23 = 0x00000000
R24 = 0x00000000     R25 = 0x00000000  R26 = 0x00000000  R27 = 0x00A786E8
R28 = 0x01010660     R29 = 0x00000000  R30 = 0x01010658  R31 = 0x01010650

Stack trace:
PC = 0x004F22DC, SP = 0x01010530
Frame 00: SP = 0x01010540    PC = 0x00A7845C
Frame 01: SP = 0x010105E0    PC = 0x004F2D34
Frame 02: SP = 0x010105E8    PC = 0x004F3418
Frame 03: SP = 0x01010668    PC = 0x004DAC64
Frame 04: SP = 0x01010688    PC = 0x004DB06C
Frame 05: SP = 0x01010690    PC = 0x004D7DD4
Frame 06: SP = 0x01010698    PC = 0x0019118C
Frame 07: SP = 0x010106B8    PC = 0x00191240
Frame 08: SP = 0x010106D8    PC = 0x00057090
Frame 09: SP = 0x010107E0    PC = 0x00057398
Frame 10: SP = 0x00000000    PC = 0x001A5570

Cisco IOS Software, C1140 Software (C1140-K9W8-M), Version 12.4(23c)JA, RELEASE
SOFTWARE (fc3)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2010 by Cisco Systems, Inc.
Compiled Tue 01-Jun-10 12:29 by prod_rel_team

ap uptime is 12 seconds

cisco AIR-LAP1142N-E-K9    (PowerPC405ex) processor (revision A0) with 98294K/32
768K bytes of memory.
Processor board ID FCZ1509W2SJ
PowerPC405ex CPU at 586Mhz, revision number 0x147E
using  eeprom values

WRDTR,CLKTR: 0x86000800 0x40000000
RQDC ,RFDC : 0x80000037 0x0000020e

     

    Was bedeutet: *Mar 1 00:00:09.324: %SYS-4-PUPDATECLOCK: Periodic Clock update with ROMMON fai

    led, because size left in ROMMON (4294967295), size needed (29), error code (-1)

     

    das denn?

  8. Cisco APs und PoE

    in Cisco Forum — Allgemein

    Geschrieben

    Was mir noch aufgefallen ist:

    sw_w63_OG_new#show power inline
Available:800(w)  Used:77(w)  Remaining:723(w)

Interface Admin  Oper            Power(Watts)     Device              Class
                           From PS    To Device
--------- ------ ---------- ---------- ---------- ------------------- -----

Gi3/1     auto   on         7.4        7.0        Ieee PD             2
Gi3/2     auto   on         7.4        7.0        Ieee PD             2
Gi3/3     auto   on         7.4        7.0        Ieee PD             2
Gi3/4     auto   on         7.4        7.0        Ieee PD             2
Gi3/5     auto   on         7.4        7.0        Ieee PD             2
Gi3/6     auto   on         7.4        7.0        Ieee PD             2
Gi3/30    auto   on         16.4       15.4       Ieee PD             3
Gi3/48    auto   on         16.4       15.4       AIR-LAP1142N-E-K9   3
--------- ------ ---------- ---------- ---------- ------------------- -----

Totals:          8    on    77.4       72.8

     

    Er erkennt nur auf Port 48 den AP auf Port 30 sagt er Ieee PD warum das? Ist exakt die selbe HW aus der selben Lieferung...

  9. Cisco APs und PoE

    in Cisco Forum — Allgemein

    Geschrieben

    Habe ein Problem mit APs und PoE.

     

    Szenario:

    Cisco WLC5508 WLAN Controller

    2 mal AIR-LAP1142N-E-K9 angeschlossen an einen Cisco 4503-E.

    In dem Cisco 4503-E befinden sich 2 48 Port Linecards:

    1x WS-X4548-GB-RJ45 nicht PoE fähig

    1x WS-X4548-RJ45V+ PoE fähig

     

    Problem:

    Wenn beide APs an der PoE fähigen Linecard hängen scheint immer nur ein AP im Controller auf der andere blinkt fröhlich grün vor sich hin. Hängt ein AP an der PoE fähigen Linecard und der andere mit Powerinjektor an der anderen Linecard scheinen beide APs im Controller auf. Kann es sein das die PoE Leistung nicht reicht? Ich hab keinen Plan warum nicht beide APs per PoE funktionieren?

     

    `sw_w63_OG_new#show power detail
Power                                             Fan      Inline
Supply  Model No          Type       Status       Sensor   Status
------  ----------------  ---------  -----------  -------  -------
PS1     PWR-C45-1300ACV   AC 1300W   good         good     good
PS2     PWR-C45-1300ACV   AC 1300W   good         good     good

Power supplies needed by system    : 1
Power supplies currently available : 2

Power Summary                      Maximum
(in Watts)              Used     Available
----------------------   ----     ---------
System Power (12V)        290        1050
Inline Power (-50V)        77         800
Backplane Power (3.3V)      0           0
----------------------   ----     ---------
Total                     367 (not to exceed Total Maximum Available = 1300)


                          Watts Used of System Power (12V)
Mod   Model               currently  out of reset  in reset
----  -------------------   ---------  ------------  --------
1    WS-X4013+                110         110         110
2    WS-X4548-GB-RJ45          60          60          25
3    WS-X4548-RJ45V+           60          60          25
--   Fan Tray                60          --          --
-------------------------   ---------  ------------   -------
      Total                 290         230         160

                       Watts used of Chassis Inline Power (-50V)
                       Inline Power Admin  Inline Power Oper
Mod   Model                PS     Device       PS     Device     Efficiency
----  -------------------  ----------------    ----------------    ----------
1    WS-X4013+                -        -          -        -           -
2    WS-X4548-GB-RJ45         -        -          -        -           -
3    WS-X4548-RJ45V+         77       73         39       37          94
-------------------------  ----------------    ----------------    ----------
      Total                77       73         39       37

  11. Probleme mit Fiber Uplink zwischen 4506 und Cisco 5508 WLAN Controller

    in Cisco Forum — Allgemein

    Geschrieben

    4506:

    sh int status:

    Port Name Status Vlan Duplex Speed Type

    Gi4/3 WLAN Controller notconnect 1 auto 1000 1000BaseLH

     

    sh int gig 4/3:

    GigabitEthernet4/3 is down, line protocol is down (notconnect)

    Hardware is Gigabit Ethernet Port, address is 000c.3006.3e9a (bia 000c.3006.3e9a)

    Description: WLAN Controller

    MTU 1500 bytes, BW 1000000 Kbit, DLY 10 usec,

    reliability 255/255, txload 1/255, rxload 1/255

    Encapsulation ARPA, loopback not set

    Keepalive set (10 sec)

    Auto-duplex, Auto-speed

    input flow-control is off, output flow-control is off

    ARP type: ARPA, ARP Timeout 04:00:00

    Last input never, output never, output hang never

    Last clearing of "show interface" counters 06:44:04

    Input queue: 0/2000/0/0 (size/max/drops/flushes); Total output drops: 0

    Queueing strategy: fifo

    Output queue: 0/40 (size/max)

    5 minute input rate 0 bits/sec, 0 packets/sec

    5 minute output rate 0 bits/sec, 0 packets/sec

    0 packets input, 0 bytes, 0 no buffer

    Received 0 broadcasts (0 multicast)

    0 runts, 0 giants, 0 throttles

    82114590 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored

    0 input packets with dribble condition detected

    0 packets output, 0 bytes, 0 underruns

    0 output errors, 0 collisions, 0 interface resets

    0 babbles, 0 late collision, 0 deferred

    0 lost carrier, 0 no carrier

    0 output buffer failures, 0 output buffers swapped out

     

    sh int gig 4/3 cou err:

    sw_w61_lampertz#sh int gig 4/3 cou err

     

    Port CrcAlign-Err Dropped-Bad-Pkts Collisions Symbol-Err

    Gi4/3 0 0 0 82114590

     

    Port Undersize Oversize Fragments Jabbers

    Gi4/3 0 0 0 0

     

    Port Single-Col Multi-Col Late-Col Excess-Col

    Gi4/3 0 0 0 0

     

    Port Deferred-Col False-Car Carri-Sen Sequence-Err

    Gi4/3 0 0 0 0

     

    WLC 5508:

     

    sh port summary:

     

    (Cisco Controller) >show port summary

     

    STP Admin Physical Physical Link Link

    Pr Type Stat Mode Mode Status Status Trap POE SFPType

    -- ------- ---- ------- ---------- ---------- ------ ------- ------- ----------

    1 Normal Disa Enable Auto Auto Down Enable N/A 1000BaseLX

    2 Normal Disa Enable Auto Auto Down Enable N/A Not Present

    3 Normal Disa Enable Auto Auto Down Enable N/A 1000BaseLX

    4 Normal Disa Enable Auto Auto Down Enable N/A Not Present

    5 Normal Disa Enable Auto Auto Down Enable N/A Not Present

    6 Normal Disa Enable Auto Auto Down Enable N/A Not Present

    7 Normal Disa Enable Auto Auto Down Enable N/A Not Present

    8 Normal Disa Enable Auto Auto Down Enable N/A Not Present

     

     

    Interessant sind wohl die Symbol Errors am 4506...

    Nein der WLC soll nicht per Etherchannel angebunden werden. Nur 802.1q Trunk.

  12. Probleme mit Fiber Uplink zwischen 4506 und Cisco 5508 WLAN Controller

    in Cisco Forum — Allgemein

    Geschrieben

    Ich hab hier ein Problem mit einem Cisco Catalyst 4506 IOS Version 12.1(19)EW1 und einem Cisco 5508 Wireless Controller.

     

    Es besteht ein Uplink zwischen den beiden via 10m Fiber.

    Im 4506 ist ein WS-X4306-GB mit einem LX/LH SFP mit SC Anschlusstechnik.

    Im 5508 ist ein LX SFP mit LC Anschlusstechnik, dazwischen besagtes Adapter Kabel von LC auf SC.

     

    Jetzt zum Problem: Es kommt partout kein Link zustande ich weis nicht was ich noch machen soll. Es passiert einfach gar nix:

    Folgendes hab ich schon gemacht:

    Kabel getauscht.

    SFP und Port am 4506 getauscht.

    SFP und Port am 5508 getauscht.

    Kabel gedreht, Shutdown no Shutdown an den beteiligten Interfaces, reset der Interfaces, Neustart des 5508.

     

    Der Witz an der Sache: Die Konstellation hat mit genau dieser Hardware und einem anderen 4506 an einem anderen Standort tadellos funktioniert.

     

    Gibts irgendwelche Befehle mit denen man den Link State genauer checken kann? Ich weis langsam echt nicht mehr weiter...

     

    Config des Interfaces am 4506:

    !

    interface GigabitEthernet4/3

    description WLAN Controller

    switchport trunk encapsulation dot1q

    switchport trunk allowed vlan 1,7,35

    switchport mode trunk

    !

     

    Hoffe jemand hat noch einen Tip für mich Danke!

  18. SSH extern

    in Cisco Forum — Allgemein

    Geschrieben

    Hallo,

     

    habe hier einen 876w mit einem advip image. WLAN und ATM sind deaktiviert.

    Hat eigentlich nur 2 VLANs auf Interface FE0 und FE4.

     

    FE0 ist im VLAN 1 192.168.80.0/24

    FE3 ist im VLAN 3 192.168.1.0/24

     

    NAT zwischen den Netzen wobei VLAN3 das Outside IF ist.

     

    Vom VLAN 1 kann ich per SSH auf den Router zugreifen von VLAN 3 nicht warum? Sehe glaub vor lauter Bäumen den Wald nicht mehr...

     

    Konfig:

    !
version 12.4
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
service password-encryption
!
hostname 
!
boot-start-marker
boot-end-marker
!
enable secret 5
!
aaa new-model
!
!
!
!
aaa session-id common
!
crypto pki trustpoint TP-self-signed-2132275648
enrollment selfsigned
subject-name cn=IOS-Self-Signed-Certificate-2132275648
revocation-check none
rsakeypair TP-self-signed-2132275648
!
!
crypto pki certificate chain TP-self-signed-2132275648
certificate self-signed 01

 	quit
! 
!
!
dot11 ssid
  authentication open 
  authentication key-management wpa
  guest-mode
  wpa-psk ascii 
!
no ip source-route
ip cef
!
!
no ip dhcp use vrf connected
ip dhcp excluded-address 192.168.80.1 192.168.80.99
ip dhcp excluded-address 192.168.80.151 192.168.80.254
!
ip dhcp pool Pool1
  network 192.168.80.0 255.255.255.0
  domain-name
  dns-server 217.237.151.97 217.237.151.161 
  default-router 192.168.80.1 
!
!
no ip domain lookup
ip domain name 
!
multilink bundle-name authenticated
!
!
username admin privilege 15 password 7 
archive
log config
 hidekeys
!
!
ip ssh time-out 60
ip ssh authentication-retries 2
!
bridge irb
!
!
interface BRI0
no ip address
encapsulation hdlc
shutdown
!
interface ATM0
no ip address
ip mask-reply
ip directed-broadcast
shutdown
no atm ilmi-keepalive
dsl operating-mode auto 
!
interface FastEthernet0
!
interface FastEthernet1
shutdown
no cdp enable
!
interface FastEthernet2
shutdown
!
interface FastEthernet3
switchport access vlan 3
!
interface Dot11Radio0
no ip address
shutdown
!
encryption mode ciphers aes-ccm 
!
ssid 
!
speed basic-1.0 basic-2.0 basic-5.5 6.0 9.0 basic-11.0 12.0 18.0 24.0 36.0 48.0 54.0
station-role root access-point
bridge-group 1
bridge-group 1 subscriber-loop-control
bridge-group 1 spanning-disabled
bridge-group 1 block-unknown-source
no bridge-group 1 source-learning
no bridge-group 1 unicast-flooding
!
interface Vlan1
no ip address
ip nat inside
ip virtual-reassembly
bridge-group 1
!
interface Vlan2
no ip address
!
interface Vlan3
description Extern
ip address 192.168.1.243 255.255.255.0
ip nat outside
ip virtual-reassembly
!
interface BVI1
ip address 192.168.80.1 255.255.255.0
ip nat inside
ip virtual-reassembly
!
ip default-gateway 192.168.1.10
ip route 0.0.0.0 0.0.0.0 192.168.1.10
!
!
no ip http server
ip http access-class 23
ip http authentication local
no ip http secure-server
ip http timeout-policy idle 60 life 86400 requests 10000
ip nat inside source list 101 interface Vlan3 overload
!
access-list 101 permit ip any any
no cdp run
!
!
!
!
control-plane
!
bridge 1 protocol ieee
bridge 1 route ip
!
line con 0
password 7 
no modem enable
line aux 0
line vty 0 4
access-class 101 in
password 7 
transport input ssh
!
scheduler max-task-time 5000

!
webvpn cef
end

  19. Cisco 876 T-DSL Business

    in Cisco Forum — Allgemein

    Geschrieben

    Erstmal danke für die Hilfestellung, ich hab die Config jetzt nochmal angepasst und fahre nächste Woche wieder an den Standort. Kann bitte jemand kurz über die Config schauen und mir sagen ob das so passt?

    !
version 12.4
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
service password-encryption
!
hostname XXXXXXXXXX
!
boot-start-marker
boot-end-marker
!
logging message-counter syslog
enable secret 5 XXXXXXXXXXXXXXXX
!
aaa new-model
!
!
!
!
aaa session-id common
!
crypto pki trustpoint TP-self-signed-2132275648
enrollment selfsigned
subject-name cn=IOS-Self-Signed-Certificate-2132275648
revocation-check none
rsakeypair TP-self-signed-2132275648
!
!
crypto pki certificate chain TP-self-signed-2132275648
certificate self-signed 01
   	quit
dot11 syslog
!
dot11 ssid XXXXXX
  authentication open 
  authentication key-management wpa
  guest-mode
  wpa-psk ascii 7 XXXXXXX
!
no ip source-route
ip dhcp excluded-address 192.168.80.1 192.168.80.99
ip dhcp excluded-address 192.168.80.151 192.168.80.254
!
ip dhcp pool Pool1
  network 192.168.80.0 255.255.255.0
  domain-name XXXXXXXXX
  dns-server 217.237.151.97 217.237.151.161 
  default-router 192.168.80.1 
!
!
ip cef
no ip domain lookup
ip domain name XXXXXXXXXX
!
!
!
!
username admin privilege 15 password 7 XXXXXXXXXXX
! 
!
!
archive
log config
 hidekeys
!
!
ip ssh time-out 60
ip ssh authentication-retries 2
!
bridge irb
!
!
interface BRI0
no ip address
encapsulation hdlc
shutdown
!
interface ATM0
no ip address
ip mask-reply
ip directed-broadcast
no atm ilmi-keepalive
dsl operating-mode auto 
!
interface ATM0.1 point-to-point
pvc 1/32 
 oam-pvc 0
 pppoe-client dial-pool-number 1
!
!
interface FastEthernet0
description Netzwerkdrucker
!
interface FastEthernet1
shutdown
no cdp enable
!
interface FastEthernet2
shutdown
!
interface FastEthernet3
shutdown
!
interface Dot11Radio0
no ip address
!
encryption mode ciphers aes-ccm 
!
ssid XXXXXXX
!
speed basic-1.0 basic-2.0 basic-5.5 6.0 9.0 basic-11.0 12.0 18.0 24.0 36.0 48.0 54.0
station-role root access-point
bridge-group 1
bridge-group 1 subscriber-loop-control
bridge-group 1 spanning-disabled
bridge-group 1 block-unknown-source
no bridge-group 1 source-learning
no bridge-group 1 unicast-flooding
!
interface Vlan1
no ip address
ip virtual-reassembly
bridge-group 1
!
interface Dialer0
ip address negotiated
ip mtu 1452
ip nat outside
ip virtual-reassembly
encapsulation ppp
ip tcp adjust-mss 1452
no ip mroute-cache
dialer pool 1
dialer-group 1
no cdp enable
ppp authentication pap chap callin
ppp chap refuse
ppp pap sent-username feste-ip8/XXXXXXXXX@t-online-com.de password 7 XXXXXXXXXXXX
!
interface BVI1
ip address 192.168.80.1 255.255.255.0
!
ip forward-protocol nd
ip route 0.0.0.0 0.0.0.0 Dialer0
ip http server
ip http access-class 23
ip http authentication local
ip http secure-server
ip http timeout-policy idle 60 life 86400 requests 10000
!
ip nat inside source list 1 interface Dialer0 overload
!
dialer-list 1 protocol ip permit
no cdp run

!
!
!
!
control-plane
!
bridge 1 protocol ieee
bridge 1 route ip
!
line con 0
no modem enable
line aux 0
line vty 0 4
password 7 XXXXXXXXXX
transport input ssh
!
scheduler max-task-time 5000
end

     

    Vielen Dank

  20. Cisco 876 T-DSL Business

    in Cisco Forum — Allgemein

    Geschrieben

    *Mar 1 01:14:52.295: Vi1 LCP: O CONFNAK [ACKrcvd] id 100 len 8

    *Mar 1 01:14:52.295: Vi1 LCP: MRU 1500 (0x010405DC)

    *Mar 1 01:14:52.351: Vi1 LCP: I CONFREQ [ACKrcvd] id 101 len 19

    *Mar 1 01:14:52.351: Vi1 LCP: MRU 1492 (0x010405D4)

    *Mar 1 01:14:52.351: Vi1 LCP: AuthProto CHAP (0x0305C22305)

    *Mar 1 01:14:52.351: Vi1 LCP: MagicNumber 0x1E7838D8 (0x05061E7838D8)

    *Mar 1 01:14:52.351: Vi1 LCP: O CONFNAK [ACKrcvd] id 101 len 8

    *Mar 1 01:14:52.351: Vi1 LCP: MRU 1500 (0x010405DC)

    *Mar 1 01:14:52.403: Vi1 LCP: I CONFREQ [ACKrcvd] id 102 len 19

    *Mar 1 01:14:52.403: Vi1 LCP: MRU 1492 (0x010405D4)

    *Mar 1 01:14:52.403: Vi1 LCP: AuthProto CHAP (0x0305C22305)

    *Mar 1 01:14:52.403: Vi1 LCP: MagicNumber 0x1E7838D8 (0x05061E7838D8)

    *Mar 1 01:14:52.403: Vi1 LCP: O CONFNAK [ACKrcvd] id 102 len 8

    *Mar 1 01:14:52.403: Vi1 LCP: MRU 1500 (0x010405DC)

    *Mar 1 01:14:52.459: Vi1 LCP: I CONFREQ [ACKrcvd] id 103 len 19

    *Mar 1 01:14:52.459: Vi1 LCP: MRU 1492 (0x010405D4)

    *Mar 1 01:14:52.459: Vi1 LCP: AuthProto CHAP (0x0305C22305)

    *Mar 1 01:14:52.459: Vi1 LCP: MagicNumber 0x1E7838D8 (0x05061E7838D8)

    *Mar 1 01:14:52.459: Vi1 LCP: O CONFREJ [ACKrcvd] id 103 len 8

    *Mar 1 01:14:52.459: Vi1 LCP: MRU 1492 (0x010405D4)

    *Mar 1 01:14:52.511: Vi1 LCP: I CONFREQ [ACKrcvd] id 104 len 15

    *Mar 1 01:14:52.511: Vi1 LCP: AuthProto CHAP (0x0305C22305)

    *Mar 1 01:14:52.515: Vi1 LCP: MagicNumber 0x1E7838D8 (0x05061E7838D8)

    *Mar 1 01:14:52.515: Vi1 LCP: O CONFACK [ACKrcvd] id 104 len 15

    *Mar 1 01:14:52.515: Vi1 LCP: AuthProto CHAP (0x0305C22305)

    *Mar 1 01:14:52.515: Vi1 LCP: MagicNumber 0x1E7838D8 (0x05061E7838D8)

    *Mar 1 01:14:52.515: Vi1 LCP: State is Open

    *Mar 1 01:14:52.515: Vi1 PPP: Phase is AUTHENTICATING, by the peer

    *Mar 1 01:14:52.571: Vi1 CHAP: I CHALLENGE id 32 len 27 from "STGL11"

    *Mar 1 01:14:52.571: Vi1 CHAP: Unable to authenticate for peer

    *Mar 1 01:14:52.571: Vi1 PPP: Sending Acct Event[Down] id[19]

    *Mar 1 01:14:52.571: Vi1 PPP: Phase is TERMINATING

    *Mar 1 01:14:52.571: Vi1 LCP: O TERMREQ [Open] id 3 len 4

    *Mar 1 01:14:52.643: Vi1 LCP: I TERMACK [TERMsent] id 3 len 4

    *Mar 1 01:14:52.643: Vi1 LCP: State is Closed

    *Mar 1 01:14:52.643: Vi1 PPP: Phase is DOWN

    *Mar 1 01:14:52.643: PPPoE : Shutting down client session

    *Mar 1 01:14:52.643: [0]PPPoE 3720: O PADT R:0090.1aa1.0496 L:0023.eb58.d0a2 1/32 ATM0.1

    *Mar 1 01:14:52.643: %DIALER-6-UNBIND: Interface Vi1 unbound from profile Di0

    *Mar 1 01:14:52.647: %LINK-3-UPDOWN: Interface Virtual-Access1, changed state to down

    *Mar 1 01:14:52.679: PPPoE 3720: I PADT R:0090.1aa1.0496 L:0023.eb58.d0a2 1/32 ATM0.1

    *Mar 1 01:15:11.387: %LINK-3-UPDOWN: Interface ATM0, changed state to down

  21. Cisco 876 T-DSL Business

    in Cisco Forum — Allgemein

    Geschrieben

    *Mar 1 01:14:51.547: Vi1 LCP: O CONFNAK [ACKrcvd] id 134 len 8

    *Mar 1 01:14:51.547: Vi1 LCP: MRU 1500 (0x010405DC)

    *Mar 1 01:14:51.603: Vi1 LCP: I CONFREQ [ACKrcvd] id 135 len 18

    *Mar 1 01:14:51.603: Vi1 LCP: MRU 1492 (0x010405D4)

    *Mar 1 01:14:51.603: Vi1 LCP: AuthProto PAP (0x0304C023)

    *Mar 1 01:14:51.603: Vi1 LCP: MagicNumber 0x03AA25BD (0x050603AA25BD)

    *Mar 1 01:14:51.603: Vi1 LCP: O CONFNAK [ACKrcvd] id 135 len 8

    *Mar 1 01:14:51.603: Vi1 LCP: MRU 1500 (0x010405DC)

    *Mar 1 01:14:51.651: Vi1 LCP: I CONFREQ [ACKrcvd] id 136 len 18

    *Mar 1 01:14:51.655: Vi1 LCP: MRU 1492 (0x010405D4)

    *Mar 1 01:14:51.655: Vi1 LCP: AuthProto PAP (0x0304C023)

    *Mar 1 01:14:51.655: Vi1 LCP: MagicNumber 0x03AA25BD (0x050603AA25BD)

    *Mar 1 01:14:51.655: Vi1 LCP: O CONFREJ [ACKrcvd] id 136 len 8

    *Mar 1 01:14:51.655: Vi1 LCP: MRU 1492 (0x010405D4)

    *Mar 1 01:14:51.703: Vi1 LCP: I CONFREQ [ACKrcvd] id 137 len 14

    *Mar 1 01:14:51.703: Vi1 LCP: AuthProto PAP (0x0304C023)

    *Mar 1 01:14:51.703: Vi1 LCP: MagicNumber 0x03AA25BD (0x050603AA25BD)

    *Mar 1 01:14:51.707: Vi1 LCP: O CONFACK [ACKrcvd] id 137 len 14

    *Mar 1 01:14:51.707: Vi1 LCP: AuthProto PAP (0x0304C023)

    *Mar 1 01:14:51.707: Vi1 LCP: MagicNumber 0x03AA25BD (0x050603AA25BD)

    *Mar 1 01:14:51.707: Vi1 LCP: State is Open

    *Mar 1 01:14:51.707: Vi1 PPP: Phase is AUTHENTICATING, by the peer

    *Mar 1 01:14:51.707: Vi1 PAP: Using hostname from interface PAP

    *Mar 1 01:14:51.707: Vi1 PAP: Using password from interface PAP

    *Mar 1 01:14:51.707: Vi1 PAP: O AUTH-REQ id 1 len 52 from "feste-ip8/**************@t-online-com.de"

    *Mar 1 01:14:52.167: Vi1 LCP: I CONFREQ [Open] id 98 len 19

    *Mar 1 01:14:52.167: Vi1 LCP: MRU 1492 (0x010405D4)

    *Mar 1 01:14:52.167: Vi1 LCP: AuthProto CHAP (0x0305C22305)

    *Mar 1 01:14:52.167: Vi1 LCP: MagicNumber 0x1E7838D8 (0x05061E7838D8)

    *Mar 1 01:14:52.167: Vi1 PPP: Sending Acct Event[Reneg] id[19]

    *Mar 1 01:14:52.167: Vi1 PPP: Phase is TERMINATING

    *Mar 1 01:14:52.171: Vi1 PPP: No remote authentication for call-out

    *Mar 1 01:14:52.171: Vi1 PPP: Phase is ESTABLISHING

    *Mar 1 01:14:52.171: Vi1 LCP: O CONFREQ [Open] id 2 len 10

    *Mar 1 01:14:52.171: Vi1 LCP: MagicNumber 0x24294384 (0x050624294384)

    *Mar 1 01:14:52.171: Vi1 LCP: O CONFNAK [Open] id 98 len 8

    *Mar 1 01:14:52.171: Vi1 LCP: MRU 1500 (0x010405DC)

    *Mar 1 01:14:52.243: Vi1 LCP: I CONFACK [REQsent] id 2 len 10

    *Mar 1 01:14:52.243: Vi1 LCP: MagicNumber 0x24294384 (0x050624294384)

    *Mar 1 01:14:52.243: Vi1 LCP: I CONFREQ [ACKrcvd] id 99 len 19

    *Mar 1 01:14:52.243: Vi1 LCP: MRU 1492 (0x010405D4)

    *Mar 1 01:14:52.243: Vi1 LCP: AuthProto CHAP (0x0305C22305)

    *Mar 1 01:14:52.243: Vi1 LCP: MagicNumber 0x1E7838D8 (0x05061E7838D8)

    *Mar 1 01:14:52.243: Vi1 LCP: O CONFNAK [ACKrcvd] id 99 len 8

    *Mar 1 01:14:52.243: Vi1 LCP: MRU 1500 (0x010405DC)

    *Mar 1 01:14:52.295: Vi1 LCP: I CONFREQ [ACKrcvd] id 100 len 19

    *Mar 1 01:14:52.295: Vi1 LCP: MRU 1492 (0x010405D4)

    *Mar 1 01:14:52.295: Vi1 LCP: AuthProto CHAP (0x0305C22305)

    *Mar 1 01:14:52.295: Vi1 LCP: MagicNumber 0x1E7838D8 (0x05061E7838D8)

  22. Cisco 876 T-DSL Business

    in Cisco Forum — Allgemein

    Geschrieben

    *Mar 1 01:14:48.943: Sending PADI: vc=1/32

    *Mar 1 01:14:49.191: PPPoE 0: I PADO R:0090.1aa1.0496 L:0023.eb58.d0a2 1/32 ATM0.1

    *Mar 1 01:14:50.187: %LINK-3-UPDOWN: Interface ATM0, changed state to up

    *Mar 1 01:14:50.991: PPPOE: we've got our pado and the pado timer went off

    *Mar 1 01:14:50.991: OUT PADR from PPPoE Session

    *Mar 1 01:14:51.123: PPPoE 3720: I PADS R:0090.1aa1.0496 L:0023.eb58.d0a2 1/32 ATM0.1

    *Mar 1 01:14:51.123: IN PADS from PPPoE Session

    *Mar 1 01:14:51.123: %DIALER-6-BIND: Interface Vi1 bound to profile Di0

    *Mar 1 01:14:51.123: PPPoE: Virtual Access interface obtained.

    *Mar 1 01:14:51.123: PPPoE : encap string prepared

    *Mar 1 01:14:51.123: [0]PPPoE 3720: data path set to Virtual Acess

    *Mar 1 01:14:51.123: Vi1 PPP: Phase is DOWN, Setup

    *Mar 1 01:14:51.127: Vi1 PPP: Using dialer call direction

    *Mar 1 01:14:51.127: Vi1 PPP: Treating connection as a callout

    *Mar 1 01:14:51.127: Vi1 PPP: Session handle[5000003E] Session id[0]

    *Mar 1 01:14:51.127: Vi1 PPP: Phase is ESTABLISHING, Active Open

    *Mar 1 01:14:51.127: Vi1 PPP: No remote authentication for call-out

    *Mar 1 01:14:51.127: Vi1 LCP: O CONFREQ [Closed] id 1 len 10

    *Mar 1 01:14:51.127: Vi1 LCP: MagicNumber 0x24293F6B (0x050624293F6B)

    *Mar 1 01:14:51.127: %LINK-3-UPDOWN: Interface Virtual-Access1, changed state to up

    *Mar 1 01:14:51.203: %LINEPROTO-5-UPDOWN: Line protocol on Interface ATM0, changed state to up

    *Mar 1 01:14:51.387: Vi1 LCP: I CONFREQ [REQsent] id 131 len 18

    *Mar 1 01:14:51.387: Vi1 LCP: MRU 1492 (0x010405D4)

    *Mar 1 01:14:51.387: Vi1 LCP: AuthProto PAP (0x0304C023)

    *Mar 1 01:14:51.387: Vi1 LCP: MagicNumber 0x03AA25BD (0x050603AA25BD)

    *Mar 1 01:14:51.391: Vi1 LCP: O CONFNAK [REQsent] id 131 len 8

    *Mar 1 01:14:51.391: Vi1 LCP: MRU 1500 (0x010405DC)

    *Mar 1 01:14:51.391: Vi1 LCP: I CONFACK [REQsent] id 1 len 10

    *Mar 1 01:14:51.391: Vi1 LCP: MagicNumber 0x24293F6B (0x050624293F6B)

    *Mar 1 01:14:51.443: Vi1 LCP: I CONFREQ [ACKrcvd] id 132 len 18

    *Mar 1 01:14:51.443: Vi1 LCP: MRU 1492 (0x010405D4)

    *Mar 1 01:14:51.443: Vi1 LCP: AuthProto PAP (0x0304C023)

    *Mar 1 01:14:51.443: Vi1 LCP: MagicNumber 0x03AA25BD (0x050603AA25BD)

    *Mar 1 01:14:51.443: Vi1 LCP: O CONFNAK [ACKrcvd] id 132 len 8

    *Mar 1 01:14:51.443: Vi1 LCP: MRU 1500 (0x010405DC)

    *Mar 1 01:14:51.495: Vi1 LCP: I CONFREQ [ACKrcvd] id 133 len 18

    *Mar 1 01:14:51.495: Vi1 LCP: MRU 1492 (0x010405D4)

    *Mar 1 01:14:51.495: Vi1 LCP: AuthProto PAP (0x0304C023)

    *Mar 1 01:14:51.495: Vi1 LCP: MagicNumber 0x03AA25BD (0x050603AA25BD)

    *Mar 1 01:14:51.495: Vi1 LCP: O CONFNAK [ACKrcvd] id 133 len 8

    *Mar 1 01:14:51.495: Vi1 LCP: MRU 1500 (0x010405DC)

    *Mar 1 01:14:51.547: Vi1 LCP: I CONFREQ [ACKrcvd] id 134 len 18

    *Mar 1 01:14:51.547: Vi1 LCP: MRU 1492 (0x010405D4)

    *Mar 1 01:14:51.547: Vi1 LCP: AuthProto PAP (0x0304C023)

    *Mar 1 01:14:51.547: Vi1 LCP: MagicNumber 0x03AA25BD (0x050603AA25BD)

  23. Cisco 876 T-DSL Business

    in Cisco Forum — Allgemein

    Geschrieben

    korrekt und gib als statische Addresse dann die Dir zugewiesene IP Addresse an.

    Und halt dns, gateway, usw

    Genau das soll man laut Telekom Business Hotline nicht machen. So wie ich die verstanden hab wird nach wie vor DHCP benutzt allerdings wird immer die selbe IP zugewiesen...

    Kann mal bitte jemand den Anhang freischalten damit man das Debug Log sehen kann?

  24. Cisco 876 T-DSL Business

    in Cisco Forum — Allgemein

    Geschrieben

    Ich hatte sowohl PAP als auch CHAP schon getrennt und zusammen am laufen, hat nicht geklappt. Aussage der Telekom Business Hotline ist das sowohl PAP als auch CHAP unterstützt werden...

     

    Im noch nicht freigeschalteten Anhang ist auch ein deb ppp enthalten hoffe das bringt irgendjemand hier weiter da ich jedesmal 2 Stunden fahren muss um das zu testen ...

  25. Cisco 876 T-DSL Business

    in Cisco Forum — Allgemein

    Geschrieben

    Hallo hab hier einen T-DSL Business Anschluss mit fixer IP und bekomm einfach keine Verbindung Authentication ist fix auf pap eingestellt.

    Username und Passwort stimmen hundertprozentig. Trotzdem werd ich von T-Online dauernd wegen falscher Username/Passwort gesperrt.

    Jemand eine Idee?

     

    Deb pppoe env/err im Anhang.

     

     

    interface Dialer0

    ip address dhcp

    ip mtu 1492

    ip nat outside

    ip virtual-reassembly

    encapsulation ppp

    dialer pool 1

    dialer-group 1

    no cdp enable

    ppp authentication pap callin

    ppp pap sent-username feste-ip8/**************@t-online-com.de password 7 *************

    Debugging.txt

×
×
  • Neu erstellen...