web_dieb
-
Gesamte Inhalte
14 -
Registriert seit
-
Letzter Besuch
Beiträge erstellt von web_dieb
-
-
Habe gestern den Router auf Werkseinstellungen zurückgesetzt und mit Fast Step noch mal neu eingerichtet!
------freenet XXL-------------
Er zeigt mir über die Monitorsoft und am Router Rote LED (CH 1) eine Onlineverbindung an.
Wenn ich den IE öffne bekomme ich jedoch keinen Seitenaufbau,
(Proxieinstellungen werden gesucht) ?
habe danach Proxi 192.168.0.1 Port 8080 eigestellt!
Kann es sein das es bloß noch an meiner IE Einstellungen liegt?
MfG.
-
hab ihn schon mal neu gestartet, ohne erfolg!
-
kann zum Router per LAN und COM 1 keine Vebindung mehr herstellen.
--------Grät nicht auffindbar---------
MfG
-
hier die config.
interface Ethernet0er
CP
ip address 192.168.0.1 255.255.255.0
!
1
fc2)11
Copyright ©
no ip directed-broadcast, Inc.000 by cisco S
no ip proxy-arp
ip nat inside
Compil
!
interface BRI06:01 by phangu
no ip address
interface Dialer1-UPDOWN: Inte
description ISP
ip address negotiatedd-encr
no ip directed-broadcast
acce
1
00:00:223338
no ip proxy-arpISCONNECT: Inter
ip nat outsideconnected from
encapsulation pppe U
no ip split-horizon
dialer remote-name Cisco1
Translatin
dialer pool 1ain server (19
dialer idle-timeout 60
011 , c
dialer string 0191011 class DialClassns witho
dialer hold-queue 10
00:00:219054111284
dialer-group 1: Interface BRI
ip route 0.0.0.0 0.0.0.0 Dialer1
!
!
map-class dialer DialClass
dialer isdn short-hold 120
access-list 18 permit 10.0.0.0 0.0.0.255
access-list 121 deny udp any eq netbios-dgm any
access-list 121 deny udp any eq netbios-ns any
access-list 121 deny udp any eq netbios-ss any
access-list 121 deny tcp any eq 137 any
access-list 121 deny tcp any eq 138 any
access-list 121 deny tcp any eq 139 any
access-list 121 permit ip any any time-range TIME
dialer-list 1 protocol ip permit
!
line con 0
exec-timeout 120 0
transport input none
stopbits 1
line vty 0 4
exec-timeout 0 0
login local
MfG
-
Cisco>ping 80.67.17.41
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 80.67.17.41, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 48/50/52 ms
Cisco>ping http://www.mcseboard.de'>http://www.mcseboard.de
Translating "www.mcseboard.de"...domain server (194.25.2.129) [OK]
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 80.67.17.41, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 48/51/52 ms
Cisco>
ping zu 80.67.17.41 und zu http://www.mcseboard.de vom Client geht verloren bzw. Host kann nicht gefunden werden.
MfG
-
Ich kann jetzt einwandfrei eine Verbindung zu T-Online per "Monitor" herstellen jedoch bekomme ich immernoch keinen Seitenaufbau im Explorer oder eine Verbindung mit Outlook zu Mailservern.
Interneteinstellung im IE:
nur "automatische Suche der Einstellungen" aktiviert.
mfg
-
1. vom Router: ping 194.25.2.129
ping 194.25.2.129mem
Cisco#config
011 , call lasted 1 seconds
00:02:227644045876: %LINK-3-UPDOWN: Interface BRI0:2, changed state to down.
00:02:227633266688: %DIALER-6-UNBIND: Interface BRI0:2 unbound from profile Dial
er1.
00:02:236223201280: %LINK-3-UPDOWN: Interface BRI0:2, changed state to up
00:02:236223201280: %DIALER-6-BIND: Interface BRI0:2 bound to profile Dialer1
00:02:236223201280: %ISDN-6-CONNECT: Interface BRI0:2 is now connected to 019101
1
00:02:249108103167: %ISDN-6-DISCONNECT: Interface BRI0:2 disconnected from 0191
011 , call lasted 1 seconds
00:02:244823915060: %LINK-3-UPDOWN: Interface BRI0:2, changed state to down.
00:02:244813135872: %DIALER-6-UNBIND: Interface BRI0:2 unbound from profile Dial
er1.
Success rate is 0 percent (0/5)
Cisco>
00:02:253403070464: %LINK-3-UPDOWN: Interface BRI0:2, changed state to up
00:02:253403070464: %DIALER-6-BIND: Interface BRI0:2 bound to profile Dialer1
00:02:253403070464: %ISDN-6-CONNECT: Interface BRI0:2 is now connected to 019101
1
00:03:8589934591: %ISDN-6-DISCONNECT: Interface BRI0:2 disconnected from 019101
1 , call lasted 1 seconds
00:03:4305746484: %LINK-3-UPDOWN: Interface BRI0:2, changed state to down
00:03:4294967296: %DIALER-6-UNBIND: Interface BRI0:2 unbound from profile Dialer
1
2. vom Client: ping 192.168.0.1
bekomme Antwort!
3. vom Client: ping 194.25.2.129
bekomme Antwort!
trag ich diese Zeile :
access-list 18 permit 192.168.0.0 0.0.0.255
einfach in der config t ein ?
bekomme leider auch so keinen seitenaufbau :(
mfg
-
geht leider auch nicht. Jetzt verbindet der Router ganz automatisch ohne den "Monitor" und geht auch nicht mehr aus. Jedoch bekomme ich auch jetzt keinen Seitenaufbau.
Und noch eine Frage, kann der 803er mehrere ISP Verbindungen speichern? Ich will unter der Woche über T-Online und Sonntags über XXL surfen.geht das ?
mfg
-
Version 12.0
service timestamps debug uptime
service timestamps log uptime
service password-encryption
!
hostname Cisco
!
enable secret 5 xxxxxxxxxxx
!
username Cisco password 7 xxxxxxxxxxxx
!
ip subnet-zero
no ip source-route
!
ip dhcp pool DHCPPoolLAN_0
network 10.0.0.0 255.255.255.0
dns-server 194.25.2.129
default-router 10.0.0.1
!
ip name-server 194.25.2.129
isdn switch-type basic-net3
isdn voice-call-failure 0
cns event-service server
!
interface Ethernet0
ip address 192.168.0.1 255.255.255.0
ip access-group 121 in
no ip directed-broadcast
no ip proxy-arp
ip nat inside
!
interface BRI0
no ip address
no ip directed-broadcast
encapsulation ppp
dialer pool-member 1
isdn switch-type basic-net3
ppp authentication chap pap callin
!
interface Dialer1
description ISP
ip address negotiated
ip access-group 121 in
no ip directed-broad
no ip proxy-arp
ip nat outside
encapsulation ppp
no ip split-horizon
dialer remote-name Cisco1
dialer pool 1
dialer idle-timeout 60
dialer string 0191011 class DialClass
dialer hold-queue 10
dialer-group 1
ppp authentication chap pap callin
ppp chap hostname xxxxxxxxxxxxxxxxxxxx
ppp chap password X
ppp pap sent-username xxxxxxxxxxxxxxxxx password xxxx
!
ip nat inside source list 18 interface Dialer1 overload
no ip http server
ip classless
ip route 0.0.0.0 0.0.0.0 Dialer1
!
!
map-class dialer DialClass
dialer isdn short-hold 120
access-list 18 permit 10.0.0.0 0.0.0.255
access-list 121 deny udp any eq netbios-dgm any
access-list 121 deny udp any eq netbios-ns any
access-list 121 deny udp any eq netbios-ss any
access-list 121 deny tcp any eq 137 any
access-list 121 deny tcp any eq 138 any
access-list 121 deny tcp any eq 139 any
access-list 121 permit ip any any time-range TIME
dialer-list 1 protocol ip permit
!
line con 0
exec-timeout 120
transport input none debug uptimevice tim
stopbits 1g uptimeT,p
line vty 0 4
exec-timeout 0 0
login local
!
time-range TIME
periodic daily 0:00 to 23:59
!
end
thorgood: pwd entf.
-
habe dem Router jetzt die ip 192.168.0.1 sub 255.255.255.0 gegeben. Er baut auch laut LED und Monior eine ISDN Verbindung auf, jedoch bekomme ich keine Verbindung per IE.
Meine Netzwerkkarteneinstellungen sind:
IP: 192.168.0.12
Sub: 255.255.255.0
St.Gateway: 192.168.0.1
bev.DNS-Sever: 194.25.2.129
Was mache ich falsch ?`
mfg
-
der nächste teilerfolg
Cisco>enable
Password:
Password:
Cisco#Router>enable
% Unknown command or computer name, or unable to find computer address
Cisco#conf t
Enter configuration commands, one per line. End with CNTL/Z.
Cisco(config)#interface ethernet0
Cisco(config-if)#ip address 192.168.0.1 255.255.255.0
Cisco(config-if)#no shut
Cisco(config-if)#exit
Cisco(config)#exit
Cisco#
00:05:16: %SYS-5-CONFIG_I: Configured from console by console
Cisco#
00:07:30: %SYS-5-CONFIG_I: Configured from console by Cisco on vty0 (192.168.0.2
)
kann jetzt über LAN eine Internetverbingung herstellen, zeigt jedenfalls der Monitor an.
Aber wie muss der Internet Explorer config. werden?
Gruß web_dieb
-
Hallo,
habe es gestern noch geschafft per Hyper Terminal eine Verbindung zum Router auzubauen.
Ist ja schon mal ein anfang!!!
Jetzt müsste der Router noch config. werden.
und dann in der reihenfolge?
Router>enable
Router#conf t
Router(config)#interface ethernet0
Router(config-if)#ip address 192.168.0.1 255.255.255.0
Router(config-if)#no shut
Router(config-if)#exit
Router(config)#exit
Router#wr
und das Ergebnis
Cisco>Router(config)#interface ethernet0
^
% Invalid input detected at '^' marker.
Cisco>Router(config-if)#ip adress 192.168.0.1 255.255.255.0
^
% Invalid input detected at '^' marker.
Cisco>Router(config-if)#no shut
^
% Invalid input detected at '^' marker.
Cisco>Router(config-if)#exit
% Unknown command or computer name, or unable to find computer address
Cisco>Router(config)#exit
% Unknown command or computer name, or unable to find computer address
Cisco>Router#wr
% Unknown command or computer name, or unable to find computer address
Cisco>
Gruß web_dieb
-
Hallo,
ich bin am durchdrehen
habe mir bei ebay einen 803 ersteigert ohne Benutzerhanbuch!!!
Cisco ist eine zuemlich schwere Kost für son durchschnittsanwender.
Ich kann auf den Router nur über den com Port zugreifen und auch konfig. aber keine IP vergeben!!!
über LAN erkennt er den Router nicht mehr
kann mir jemand helfen oder ist das Teil kaputt?
Danke web_dieb
Cisco 803 Ersteinrichtung Hilfe
in Cisco Forum — Allgemein
Geschrieben
Current configuration:hanged state to upDial
!1
version 12.0
service timestamps debug uptime
00:00:
service timestamps log uptime Interface BRI0:2 is now conn
service password-encryptionWN: Interface BRI0:2, chang
!
hostname Cisco
!
logging buffered 8192 debugging
enable secret 5 $1$n4OP$hlxHyMbx3hVR2FX2N828V/
1
00:00:223338299391: %ISDN-6-DISCONN
!T
username Cisco password 7 0802455D0A16191BIND: Interface BRI0:2 unbound from
!r
!i
!
!a
!
dial-peer voice 1 pots
no forward-to-unused-port
call-waiting
ring 0call la
port 1econds
destination-pattern xxxxxxxxxx
!
dial-peer voice
00
00:00:219043332096:
!D
pots country DEInterface BRI0:
ip subnet-zeroprofile Dial
no ip source-route
!
ip inspect name firewall cuseeme
00:00:21
er1397
ip inspect name firewall fragment maximum 256 timeout 1sword:0:2 is no
Cisco#sh ruto 019101
ip inspect name firewall ftpconfiguration...
ip inspect name firewall httpration:
ip inspect name firewall h323Iv7i$FjkyH2iwfG77kXZHHk7WX/ t
ip inspect name firewall realaudio
!
usern
ip inspect name firewall smtpC2E0:219043332096: %DIALER-6-
ip inspect name firewall sqlnet
ip inspect name firewall streamworks
!2
!n
ip subnet-zeroile Dial
ip inspect name firewall tftprce-route
!
ip inspect name firewall vdolive
er1
ip access-group 101 intype basic-net3
no ip directed-broadcastoice-call-failure 0 attem
no ip proxy-arpot
ip nat inside
!
interface BRI0service server
no ip address
!
no ip directed-broadcastace Ethernet0T.bin" ...,
encapsulation ppp
no ip
dialer pool-member 1
t
no ip directed
isdn switch-type basic-net3
isdn incoming-voice modemencapsulation ppp Software
ppp authentication chap pap callin
dialer pool-member 1
ppp multilink
isdn switc
!t
interface Dialer1R sec.
description
dialer pool 1
ip nat out
dialer idle-timeout 300
dialer string 01033030221600707 class DialClass 17
no ip split-horizon
dialer hold-queue 10er remote-name Cisco1
dialer load-threshold 10 either
dialer-group 1ialer pool 1-CO
pulse-time 0
ppp authentication chap pap callinnternetwork Operating S
ppp chap hostname xxl
dialer st
ppp chap password 7 0302490E03012458
!l
i
ppp pap sent-username xxl password 7 045D19030A2F495
access-list 101 deny udp any eq netbios-dgm any
acces
access-list 101 deny udp any eq netbios-ns anyat do not have prior
access-list 101 deny udp any eq netbios-ss any0:
access-list 121 deny udp any eq netbios-
access-list 101 deny tcp any eq 137 any
!i
line con 0al or el
access-list 111 permit icmp any any packet-too-big time-range TIME
access-list 111 permit icmp any any time-exceeded time-range TIME
access-list 111 permit icmp any any traceroute time-range TIME
access-list 111 permit icmp any any unreachable time-range TIME
access-list 111 deny ip any any
dialer-list 1 protocol ip permit
!
line con 0
exec-timeout 120 0
transport input none
stopbits 1
line vty 0 4
exec-timeout 0 0
login local
!
time-range TIME
periodic daily 0:00 to 23:59
!
end