Karen M
-
Gesamte Inhalte
24 -
Registriert seit
-
Letzter Besuch
Beiträge erstellt von Karen M
-
-
bin ja flott dabei.. hab mir nen W2k DC aufgesetzt -Schemaänderungen lt o.g. Anleitung erlaubt, und Unternehmensinitialisierung gestartet ... und wieder kann ich das Schema nicht ändern...
:shock:
ich habe auch nur ein administratives Konto - den Built-In Administrator -der darf das Schema auch ändern.
Muß wohl doch an den Testversionen liegen.Wie soll man sich da ordentlich auf Prüfungen vorbereiten
Gruß Karen
-
Hallo Grizzly,
Danke für die schnelle Antwort.Klar hab ich erst mal überall gesucht... Mein ISA läuft ja auch auf einem Windows 2000 Server.Ich hatte alle Artikel so aufgefaßt, dass man den ISA nicht direkt auf Windows 2003 installieren kann, da die Testversion halt nicht updatefähig ist.
Im Schulungsraum hatten wir DC´s mit Windows 2000 Server...allerdings wurden dort m.E. die Vorbereitungen für das Ändern des Schemas nicht sorgfältig getroffen ( ich war leider nicht immer da)
Du meinst also ich soll noch mal einen 2000 DC aufsetzen und dann funzt das alles ?
Gruß Karen
-
Hallo Ihr lieben Boardmitglieder,
auch wenn die Beiträge vorher schon alt sind, möchte ich das Thema noch einmal aufgreifen, dass der DC das neue Schema vom ISA 2000 nicht mag.
Auch ich bereite mich gerde auf die 70-227 vor...
Ich habe 5 Installationen in einem Schulungsraum gesehen - kein Schemaupdate hat funktioniert. Nun wollte ich unbedingt zu Hause die Konfigurationen mit Unternehmensrichtlinien testen. Habe folgende Konfiguration:
1 DC W2003 Server Testversion 180 Tage
2. W2k Server als Member mit ISA 2000 beides Testversionen
Bin natürlich Schemaadmin und habe den DC auch sorgfältig für Schemaänderungen vorbereitet.
http://www.msisafaq.de/Anleitungen/2000/Installation/ArrayInstallation.htm
( habe mich auch mit den Abweichungen bei W2003 befasst -->Reg-Einträge gesetzt)
Trotzdem wird die Schemaänderung beharrlich verweigert.
Nun habe ich die Befürchtung, dass man mit den ganzen Testversionen keine Schemaupdates durchführen kann
Vielleicht weiß ja jemand was?
Danke schon mal
Karen
-
Using Office 2000 running on Windows XP operating system to connect to
a Windows WebDAV share is not supported.
- When using Microsoft Office on Windows XP, use Office's WebDAV
redirector rather than the Windows XP file redirector.
In general, when using Microsoft Office products it is best to use
files represented by their HTTP names instead of their UNC paths.
For example, use http://<Device Name>/<Virtual Root>/<File Name>
instead of \\<Device Name>\<Virtual Root>\<File Name>.
Note:
- Disabling the WebClient has no effect on Internet WWW Browsing, it is
only used for Web Distributed
Authoring and Versioning (WebDAV) connections.
-
When the Universal Naming Conventions (UNC) file name is used, the
redirector will use SMB, WebDAV, or a combination of the two depending on what is
available on the server.
When an application attempts to open a file that exists on a network,
the I/O Manager passes the request
to a system component called the Multiple UNC Provider (MUP) which sits
logically above all the redirectors.
When a network path is passed to MUP, it polls all the registered
redirectors to determine if they understand
the path. The redirectors in turn contact the server to establish if
the path is valid for the specific protocol.
If the server can satisfy the connection then the redirector will
return success back the MUP.
If not, then the redirector returns a failure. All the future File I/O
requests for this file are passed to the
redirector that accepted the path. If more than one redirector accepts
the path, MUP picks the one
with the highest priority (as defined in the registry).
171386 Connectivity Delay with Multiple Redirectors Installed
http://support.microsoft.com/?id=171386
-
URLScan blocks WebDAV requests by default
Before you install URLScan 2.5, see the white paper on the following
Microsoft Web site:
http://www.microsoft.com/technet/security/tools/tools/URLScan.asp
-
Registry Settings:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\WebClient\Parameters\ServerNotFoundCacheLifeTimeInSec
Type: REG_DWORD
Value: Default 60 (Decimal)
No Max and No Min
To change the WebDAV timeout:
The timeout represents the number of seconds WebDAV will wait for
WinInet after issuing a request (e.g. Get file, put file).
The timeout is stored in the following registry key:
\HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\MRxDAV\Parameters\RequestTimeoutInSec
Value: Default 600 (decimal) seconds = 10 minutes
REFERENCES
===========
171386.KB.EN-US Connectivity Delay with Multiple Redirectors
Installed
312181.KB.EN-US Long Delays When You Open Resources on a DFS Share
Windows SP1
317506.KB.EN-US You May Not Be Able to Log On to the Domain with VPN If
a Winsock Proxy
810401.KB.EN-US "Local Device Name Is Already in Use" Error Message
After You Interrupt preSP2
830561.KB.EN-US WD2002: Documents Take a Long Time to Open When They
Have Attached
823372.KB.EN-US Your Word Documents Take a Long Time to Open When They
Have Attached preSP2
16-Jul-2003 21:59 5.1.2600.1248 62,976 Webclnt.dll X86
817929.KB.EN-US Files Do Not Appear When You Use WebDAV to Add a
Network Place Shortcut
812924.KB.EN-US Access to Windows NT 4.0 or Windows 2000 Share May Stop
Responding IE6
829909.KB.EN-US I: KB ARTICLE IDEA: Delay when accessing network
resources with Windows
826286 New User Cannot Access the Internet and Proxy Settings Are Blank
preSP2
03-Mar-2003 12:58 5.1.2600.1178 61,952 Webclnt.dll
320507.KB.EN-US Internet Explorer Does Not Retry Bad Proxy Server for
30 Minutes
271361.KB.EN-US How to Disable Internet Explorer Automatic Proxy
Caching
819961 How to Configure Client Proxy Server Settings by Using a
Registry File
262981 Internet Explorer Uses Proxy Server for Local IP Address Even if
the
209252 Maximum Number of Characters That Can Be Specified in the
Proxy
External Web Links
http://www.microsoft.com/technet/treeview/default.asp?url=/technet/prodtechnol/windo
wsserver2003/proddocs/standard/pub_dav_aboutwebdav.asp
Internet Explorer Administration Kit 6 Service Pack 1
http://www.microsoft.com/windows/ieak/downloads/ieak6/ieak6sp1.asp
fertich :-))) !!!
-
In Windows XP and later, the Windows file redirector has a built-in
WebDAV client.
Microsoft Office 2000 and Microsoft Office XP adn 2003 have built-in
WebDAV redirectors, working independent from the WebClient service.
-
Windows XP WebDAV Redirector
Windows XP includes a new component - the WebDAV redirector, which
allows applications on Windows XP to connect to the Internet,
and to natively read and write data on the Internet. The WebDAV
protocol is an extension to
Hypertext Transfer Protocol (HTTP) that allows data to be written to
HTTP targets such as the Microsoft MSN? Web Communities.
The WebDAV redirector provides file system-level access to these
servers in the same that the existing redirector provides access to SMB/CIFS
servers.
One way to access a WebDAV share is to use the net use command, for
example:
NET USE * http://webserver/davscratch'>http://webserver/davscratch
To connect to an MSN Community, use
http://www.msnusers.com/yourcommunityname/files/ as the target.
The credentials you need in this case are your Passport credentials;
enter these details in the Connect Using Different User Name dialog if
you are using mapped network drive,
or use the /u: switch with the net use command. For example:
NET USE http://www.msnusers.com/fooname/files
/u:yourpassportaccount@hotmail.com
-
WinXP: The WebClient service is used if you connect a WebFolders
without specifying a port, i.e.
http://webserver/davscratch
A network trace will show in the HTTP header:
HTTP: User-Agent = Microsoft-WebDAV-MiniRedir/5.1.2600
Office: However when using the syntax including a port number, you are
connecting via Office' WebDAV
http://webserver:80/davscratch
A network trace will show:
HTTP: User-Agent = Microsoft Data Access Internet Publishing Provider
DAV
Note: this may or may not show as "HTTP" traffic in netmon because the
proxy port can vary.
The following list shows some of the known interoperability issues with
WebDAV:
- On Windows 2003 Server, the WebDAV client is not enabled by default
for security reasons. You need to enable the WebClient service.
- Using Microsoft Office 2000 to connect to a Windows WebDAV share is
only supported if Office 2000 is running on Windows 2000 or earlier operating
systems.
-
Note: For the current logged on user, the registry location is at:
[HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Internet
Settings]
ProxyOverride will be assigned the entries of the proxy exception list
which you can type into the Exceptions area:
1. In Internet Explorer, on the Tools menu, click Internet Options.
2. On the Connections tab, click LAN Settings.
3. Click Advanced, and type the appropriate information in the
Exceptions area.
Note: The values of these keys can bee seen in a WinMSD report under
'Internet Explorer' -> Connectivity
You can also use the Microsoft Internet Explorer Administration Kit
(IEAK) to configure proxy server settings on client computers.
For additional information about IEAK, visit the following Microsoft
Web site:
http://www.microsoft.com/windows/ieak/downloads/ieak6/ieak6sp1.asp
Note:
When using a .PAC file, WebDAV requests are generated if the .pac file
includes:
function FindProxyForURL(url, host)
{
}
You can modify the .pac to avoid WebDAV traffic:
function FindProxyForURL(url, host)
{
if (shExpMatch(host, "DCNAME*")) {
return "DIRECT";
}
WORKAROUND
==========
- Stop the service that listens on TCP port 80 on the DC as long as it
does not need to run.
or
- Disable the WebClient service on the Windows XP client.
To check the status, or to disable the WebClient service on a WebDAV
client machine:
1. From the Start menu, point to Administrative Tools, and click
Computer Management .
2. In the details pane, double-click Services and Applications.
3. Double-click Services.
4. Scroll down, right-click WebClient, and click Properties.
5. In the Startup type list box, click Disabled.
6. Click Apply.
7. Click OK.
Note: You can savely disable the WebClient service, as long as you do
not need to modify or write files on
Web Distributed Authoring and Versioning (WebDAV) servers.
Windows 2000 does not have implemented the WebClient service.
Windows Server 2003 has turned off WebClient service by default, see
812519 Services That Are Turned Off by Default in Windows Server 2003
http://support.microsoft.com/?id=812519
There are some alternatives to WebClient, i.e
If you are running Windows XP, follow these steps:
1. Disable the WebClient service.
2. Install a program that uses Web folders. For example, install
Microsoft Office XP or later on the client.
3. Delete your original Network Place.
4. Create a new Network Place.
For more information see KB817929.
STATUS
=======
Microsoft has confirmed that this is a problem in the Microsoft
products that are listed at the beginning of this article
MORE INFORMATION
=================
The WebClient service enables Windows-based programs to create, access,
and modify Internet-based files using Win32 APIs.
If this service is stopped, these functions will not be available.
Turning off WebClient service will stop the WebDAV redirector.
You will not be able to do a 'net use', dir, copy, rename etc to a web
server.
Also 'Add Network Place' will not work to a Web DAV location and you
will not be able to use Publishing Wizard to MSN Communities.
However, you can still continue to use SMB servers.
-
RESOLUTION
===========
1. Verify that you have applied Windows XP Service Pack 1
2. Configure Internet Explorer's proxy server settings to "Bypass proxy
for local addresses"
and ensure that local Intranet FQDNs are entered in the exclusion list.
3. Change the order of 'Network Providers'
To verify and change the Network Provider Order
a. On the desktop, right-click 'My Network Places', and then click
Properties.
b. On the Advanced menu, click 'Advanced Settings'.
c. Click the 'Provider Order' tab.
d. In 'Network Providers', click the 'Web Client Network' provider,
and then click the Down Arrow button so that it is the last one in
the list.
(Ensure that 'Microsoft Windows Network' is listed with higher
priority.)
e. Click "OK"
'Web Client Network' should be at the bottom by default. You can also
find the Provider order in the registry at
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\NetworkProvider\Order\ProviderOrder
The default order for the ProviderOrder value is:
RDPNP,LanmanWorkstation,WebClient
4. Apply latest WebClient hotfix (KB823372, Webclnt.dll
V5.1.2600.1248, 16-Jul-2003, or soon Q824383) on the Windows XP system.
After you install this fix, follow these steps to set the
ServerNotFoundCacheLifeTimeInSec registry key
as documentet in KB823372.
826286 New User Cannot Access the Internet and Proxy Settings Are
Blank
http://support.microsoft.com/?id=826286
5.
If you have deployed Internet Explorer using IEAK with Internet
Settings set on the .DEFAULT registry hive:
IAEK is the Internet Explorer Administration Kit to allow for scripted
install and configuration of Internet Explorer.
The WebClient service uses the .DEFAULT registry setting.
So every time we try to make a web client request, we get sent to the
proxy. The proxy request eventually times out.
Windows XP boots up and looks for a computer policy to apply (policy
file ntconfig.pol ).
a. MUP is notified that the client needs to connect to
domaincontroller1.domain.com (or just a netbios name of the logon server) and
informs available redirectors.
b. WebClient tries to handle the request.
c. WinInet loads and reads the proxy configuration from the registry:
[HKEY_USERS\.DEFAULT\Software\Microsoft\Windows\CurrentVersion\Internet
Settings]
ProxyEnable
ProxyOverride
ProxyServer
d. If these three keys are set to use a proxy server WinInet sends
request to the proxy server.
This may fail with a time-out (this can vary depending on proxy dns
cache) and the web client will return a negative response to the MUP.
In this case you can workaround by providing the DC's netbios name (-
or depending on the name that is seen in the WebDAV request - the domain name for
the internal domain) for the ProxyOverride value, i.e.
"ProxyEnable"=1
"ProxyServer"="http://<ProxyServername>:<PortNumber>"
"ProxyOverride"="*.intranet; domaincontroller1;*.domain.com;10.10.*;<local>"
where <ProxyServername> is the name of your proxy server, and
<PortNumber> is the TCP port number for HTTP, in most cases it is 80 or 8080.
Key | Value
ProxyEnable | 0 = Manual proxy detection is disabled.
1 = Manual proxy detection is enabled.
ProxyServer | The name and the port of the proxy server.
ProxyOverride | The Domain Name System (DNS) addresses, separated by
semi-colons, that should not be passed on to the proxy server. You can use the
value <local> to bypass the proxy server for local addresses. If you include this
value, it should be the final value in the string.
-
Hallo liebe Boardmitglieder,
ich hatte auch das Problem ... nach Domänenmigration an 50 Workstations. Deshalb habe ich mich schon kümmern müssen... Diese Informationen werden allen helfen, zu verstehen und entsprechend zu konfigurieren.
Liebe Grüße, Karen
------------------------------------------------------------------------------
The information in this article applies to:
- Microsoft Windows XP 64-Bit Edition
- Microsoft Windows XP Professional
- Microsoft Windows XP Professional SP1 (Version: SP1)
- Microsoft Windows XP Tablet PC Edition
-------------------------------------------------------------------------------
SUMMARY
========
Slow logon to domain from Windows XP client machine if WebClient is
running.
SYMPTOMS
=========
- At logon after you hit Control-Alt-Delete a Windows XP machine may
appear to hang at various places,
from processing group policy to waiting at a blank (by default blue)
screen before the desktop icons appear.
This can last several minutes (up to 15 minutes, entries in the MUP
cache are held for 15 minutes).
- Windows XP computer stays for several minutes in stage 'Applying
Computer Settings'
The same Windows XP machine will log in immediately with cached
credentials if the NIC is unplugged,
- Windows XP clients are accessing network shares slowly
- When you try to open a file or document that resides on a Distributed
File System (DFS) share,
it may take a long amount of time to open the resource (from 90 seconds
to 15 minutes).
However, you may be able to quickly open the same resource by using a
UNC path. (KB312181)
- When you use Microsoft Internet Explorer 6 to access shares on a
Microsoft Windows NT 4.0-based server or a
Microsoft Windows 2000-based server, access to the shares may appear to
stop responding (hang).
Note: You may gain access to the requested shares if you wait a long
time, for example, 10 minutes. (KB812924)
CAUSE
======
When entering a Uniform Naming Convention (UNC) path
\\Servername\Sharename\Directory\Filename.ext
the UNC location is first passed to the Web Client service which
attempts to connect to "http://Servername/Sharename".
WebClient uses port 80 to contact WEBDAV enabled servers and this needs
to go via WinInet through the proxy.
The proxy server will then attempt to contact the destination server
(Servername).
The Web Client waits for a response from the proxy server which may
never be sent,
resulting in a delay until the Web Client times out (default 10
minutes).
If the destination server does not support HTTP on port 80 or the
destination server is offline,
the proxy server may fail to send the expected HTTP error code back to
the Web Client.
If there is a dead external (DFS) server reference on the proxy that
the request is passed to
then the delay can be due to the timeout for the external (DFS)
connection failure.
Significant delays may also occur on a Windows XP client if all of the
following is true
- You have enabled the WebClient service (which is the default)
and the Network Provider Order lists 'Web Client Network' before
'Microsoft Windows Network'.
- The domain controller which is used for authentication runs a service
that listens on TCP port 80, i.e. Exchange server with Outlook Web Access (OWA).
- Internet Explorer's proxy server settings are not configured to
"Bypass proxy for local addresses"
and local Intranet FQDNs are not entered in the exclusion list.
-
Hallo,
... ich schäm mich ja auch schon- eigentlich hätte ich sowas Grundlegendes wissen sollen...
Nun ja - bei den TrueType Schriften funktioniert es wohl auch (ausnahmsweise) und wenn man dann noch lokaler Admin ist...
ich hab trotzdem keine Lust alle Clients abzuklappern... vielleicht hat ja jemand was Schlaues auf Lager...
Trotzdem Vielen Dank!
-
Hallo YAMBOS!
Hab ich´s nicht verstanden - oder die anderen?
Ich arbeite in erster Linie im Client- Support vor Ort. Die Domäne ist letztens auf AD umgestellt worden. Jetzt haben wir den Auftrag bekommen, an allen Clients neue Schriften zu installieren- PER HAND
Ich dachte so etwas könnte man gut mit GPO´s abhandeln?
Einfach per script die Schriften in den Ordner %windir%\Fonts kopieren und ab dem nächsten Neustart funzt es oder ???
-
Hallo,
wofür benutzt Du die ISDN- Leitung denn noch?
Zum Surfen für alle?
Ich werde das Gefühl nicht los, dass einfach nur ein günstiger Zeitpunkt für die große Mail abgewartet wird.
Karen
-
Hi 004,
das kannst Du ja noch reklamieren... klappt gut bei IBM
Karen
-
Hallo ,
mein Kollege hat mir letztens erzählt, dass die T40 nur WI-FI vorbereitet sind und dass Aufrüsten 150 € ( meine ich) kostet...ich hab extra bei IBM auf der HP nachgesehen... nur ausgewählte Modelle haben WI-FI
hier ein Auszug:
Modell1:
ThinkPad T40
TC17CGE
Fragen Sie Ihren Händler nach dem Preis 1.50GHz Intel Pentium M processor
Microsoft Windows XP Professional
256MB/ 2GB/PC2100 DDR SDRAM
40GB (ATA-100 (Enhanced IDE))
14.1''
1024 x 768TFT
ATI Mobility RADEON 7500
2.24Kg IBM ThinkPad UltraNav
--
CD-RW/DVD-ROM Combo
-- 10/100 Ethernet
56K V.92 designed modem
Wi-Fi wireless upgradable
IBM Embedded Security Subsystem 2.0
Modell2:
ThinkPad T40
TC182GE
Fragen Sie Ihren Händler nach dem Preis 1.50GHz Intel Pentium M processor
Microsoft Windows XP Professional
256MB/ 2GB/PC2100 DDR SDRAM
40GB (ATA-100 (Enhanced IDE))
14.1''
1024 x 768TFT
ATI Mobility RADEON 7500
2.25Kg IBM ThinkPad UltraNav
--
DVD-ROM
-- Integrated Intel PRO/1000 Gigabit Ethernet
56K V.92 designed modem
Intel PRO/Wireless Network Connection 802.11b
IBM Embedded Security Subsystem 2.0
Du wirst wohl eins ohne haben :-(((
Da is Nachrüsten mit USB-WLAN wohl günstiger ...
Karen
-
Hi,
hast Du die Stellvertretungsrechte schon mal auf einem anderen Client ausprobiert?
Gruß Karen
-
Hallo,
installiere den Drucker mit IP-Adresse als freigegebenenNetzwerkdrucker Beispiel:
\\SRV1\Drucker1
Im Anmeldescript der entsprechenden Clients bringst Du dann folgende Zeile unter:
net use LPT1: \\SRV1\Drucker1
Gruß Karen
-
Hallo ,
Man kann den SUS sehr wohl auf XP betreiben...
Siehe auch: Hotfix-Buffet
Automatische Sicherheits-Updates im Windows-Netz
Artikel aus c't 21/03
Dieser Artikel beschreibt die SUS- Funktionen ausführlich
Nun zu Deinem Problem:
1.die Admin- Seite läßt sich nur ab IE.5.5 aufrufen
2. in der Config-Seite des SUS gibst Du den Namen des SUS an, den die Clients benutzen ... wenn dieser Name nicht aufgelöst wird, geht es nicht
3. Im Windows- Verzeichnis gibt es die Datei "Windows Update.log" in der Datei kannst Du sehen, ob der Client überhaupt verbindet
4. Die xml-Dateien unter Programme\Windows Update (versteckter Ordner) enthalten die URL, wo das Update liegt. Da der SUS im Prinzip auch "nur" ein Webserver ist kann man die Adresse auch in die Adresszeile vom IE eingeben und den Download starten. Das sollte funktionieren
5. Warten hilft auch manchmal ...hier findest Du das Force Update:http://www.heise.de/ct/ftp/03/21/118/
Gruß Karen
-
Hallo,
ich hab grad in der Firma auch an Vertrauenstellungen gebastelt...allerdings 2x NT aber auch unabhänge Domänen.
Wichtig ist wohl, dass Sowohl die Domäne erkannt wird als auch der Domänencontroller. Das ganze funzt wohl ausschließlich über NETBIOS...
hier ein bisschen zum Lesen:
http://www.digital-labs.de/kb/faq/faq-nt4/networking/dcs_bestimmen.htm
http://www.mcseboard.de/archiv/32/2002/09/1/2220
Wir haben der o.g. lmhost noch folgenden Eintrag zugefügt
172.XXXX "W2Kdom \0x1c" #PRE
Du kannst diese Einträge auch im WINS statisch hinzufügen...
Ach ja noch nen TIP: Wenn Du ne Firewall hast, muss die für NETBIOS freigeschaltet sein ... ping arbeitet nich mit NETBIOS
und natürlich für beide DC einrichten
viel Glück
-
@Heizer
Danke für das Angebot- Zeit bis April hab ich- ich drück Dir alle Daumen! Bis dahin werde ich mich hier in den Foren produzieren, damit ich mailen darf...
Bis dahin Karen
-
Hallo Heizer,
wenn Bavaria das Buch nicht nimmt, dann nehm ich es ...
ich hab seit ein paar Tagen voll die Motivation auch mit der 210 anzufangen... Meinst Du man kann die Prüfung nur mit Lesen ohne teuren Kurs schaffen?Oder lieber mal erzählen lassen, was wirklich wichtig zum Bestehen ist?
Gruß Karen
-
Hi,
Du solltestdem W2K in jedem Fall ein Admin-Kennwort setzen, kein Admin-Kennwort sperrt den Zugriff auf Freigaben (bei XP ist es ganz sicher so- bei W2k weiss ich es nicht genau)
-
Hallo Wolf3000,
guck mal mit einem HP Jetadmin (auch alte Versionen) auf den Drucker: Dort siehst Du, ob er zusätzlichen Speicher oder gar eine Festplatte hat...Hole Dir in jedem Fall den Treiber vom Hersteller, dort kann Du dann alle diese zusätzlichen Features in den Eigenschaften (Konfiguration) eintragen. Ausserdem spricht der Treiber des Herstellers HP ;-), ich meine dass diese Treiber besser zusammenarbeiten.Wenn Du regelmäßig große pdf- Dateien hast, kann Du vielleicht auch die Auflösung ein wenig heruntersetzen,das wird nach meiner Erfahrung nicht bemerkt.
Für pdf- Dateien funktioniert auch ein PS- Druckertreiber, da kannst Du aber nicht so viel einstellen.
Probier´s einfach mal, Karen
-
Hallo,
versuch´s mal mit niedrigeren Sicherheitseinstellungen im IE
-
Hallo,
ich habe das Problem mit der gleichen Konfiguration auch... desweiteren werden Officedateien im ersten Anlauf manchmal nur schreibgeschützt geöffnet...
Gruß Karen
ISA: Win2k3 DC mag Schema nicht
in Windows Server Forum
Geschrieben
nun hab ich mir eine Vollversion für w2K Server organisiert, eine neue 2000-Domäne aufgesetzt (alles schön). Update auf SP4 ,DC für Schemaänderungen vorbereitet, Schema geändert und wieder zurückgeändert. (Also DARF ich Schema ändern)
Unternehmensinitialisierung auf dem DC ausgeführt und PENG! geht wieder nicht!!!
ISA 2000 ist immer noch Testversion - ansonsten kann man doch nichts falsch machen ?!?
Hab ich irgendetwas Kleines, Doofes übersehen ?
Werde mich jetzt wohl nicht länger an dem Kram aufhalten und NLB und Unternehmensrichtlinien etc. doch nur theoretisch durcharbeiten (können) :mad:
Vielleicht habt Ihr ja noch konstruktive Tips?
danke und lG Karen