Zum Inhalt wechseln


Foto

Routen klappt nur ein wenig


  • Bitte melde dich an um zu Antworten
56 Antworten in diesem Thema

#46 Stadt-Tiger

Stadt-Tiger

    Registered User

  • 134 Beiträge

 

Geschrieben 25. Mai 2005 - 08:41

Und hier debug von q931

*Mar 1 18:12:40.515: ISDN BR1/0 **ERROR**: host_incoming_call: DIALER ERROR 0x1
: b channel 0, call id 0x73
*Mar 1 18:12:40.519: ISDN BR1/0 EVENT: process_rxstate: ces/callid 1/0x73 callt
ype 1 HOST_DISCONNECT_ACK
*Mar 1 18:12:40.523: ISDN BR1/0 Q931: TX -> RELEASE_COMP pd = 8 callref = 0xCD

Cause i = 0x8095 - Call rejected
*Mar 1 18:12:41.973: ISDN BR1/0 Q931: RX <- BAD PACKET()
*Mar 1 18:12:43.476: ISDN BR1/0 Q931: RX <- BAD PACKET()
*Mar 1 18:12:45.311: ISDN BR1/0 Q931: RX <- BAD PACKET()
*Mar 1 18:12:45.335: ISDN BR1/0 Q931: RX <- SETUP pd = 8 callref = 0x4E
Bearer Capability i = 0x8890
Standard = CCITT
Transfer Capability = Unrestricted Digital
Transfer Mode = Circuit
Transfer Rate = 64 kbit/s
Channel ID i = 0x8A
Calling Party Number i = 0x0080, '0123'
Plan:Unknown, Type:Unknown
Called Party Number i = 0x81, '3'
Plan:ISDN, Type:Unknown
Sending Complete
*Mar 1 18:12:45.339: ISDN BR1/0 EVENT: process_rxstate: ces/callid 1/0x74 callt
ype 1 HOST_INCOMING_CALL
*Mar 1 18:12:45.343: ISDN BR1/0 **ERROR**: host_incoming_call: DIALER ERROR 0x1
: b channel 1, call id 0x74
*Mar 1 18:12:45.347: ISDN BR1/0 EVENT: process_rxstate: ces/callid 1/0x74 callt
ype 1 HOST_DISCONNECT_ACK
*Mar 1 18:12:45.347: ISDN BR1/0 Q931: TX -> RELEASE_COMP pd = 8 callref = 0xCE

Cause i = 0x8095 - Call rejected
*Mar 1 18:12:46.793: ISDN BR1/0 Q931: RX <- BAD PACKET()
*Mar 1 18:12:48.296: ISDN BR1/0 Q931: RX <- BAD PACKET()
*Mar 1 18:12:50.167: ISDN BR1/2 Q931: RX <- BAD PACKET()
*Mar 1 18:12:50.187: ISDN BR1/2 Q931: RX <- SETUP pd = 8 callref = 0x4D
Bearer Capability i = 0x8890
Standard = CCITT
Transfer Capability = Unrestricted Digital
Transfer Mode = Circuit
Transfer Rate = 64 kbit/s
Channel ID i = 0x89
Calling Party Number i = 0x0080, '0123'
Plan:Unknown, Type:Unknown
Called Party Number i = 0x81, '2'
Plan:ISDN, Type:Unknown
Sending Complete
*Mar 1 18:12:50.195: ISDN BR1/2 EVENT: process_rxstate: ces/callid 1/0x75 callt
ype 1 HOST_INCOMING_CALL
*Mar 1 18:12:50.199: ISDN BR1/2 **ERROR**: host_incoming_call: DIALER ERROR 0x1
: b channel 0, call id 0x75
*Mar 1 18:12:50.199: ISDN BR1/2 EVENT: process_rxstate: ces/callid 1/0x75 callt
ype 1 HOST_DISCONNECT_ACK
*Mar 1 18:12:50.203: ISDN BR1/2 Q931: TX -> RELEASE_COMP pd = 8 callref = 0xCD

Cause i = 0x8095 - Call rejected
*Mar 1 18:12:51.653: ISDN BR1/2 Q931: RX <- BAD PACKET()
*Mar 1 18:12:53.156: ISDN BR1/2 Q931: RX <- BAD PACKET()
*Mar 1 18:12:55.011: ISDN BR1/2 Q931: RX <- BAD PACKET()
*Mar 1 18:12:55.031: ISDN BR1/2 Q931: RX <- SETUP pd = 8 callref = 0x4E
Bearer Capability i = 0x8890
Standard = CCITT
Transfer Capability = Unrestricted Digital
Transfer Mode = Circuit
Transfer Rate = 64 kbit/s
Channel ID i = 0x8A
Calling Party Number i = 0x0080, '0123'
Plan:Unknown, Type:Unknown
Called Party Number i = 0x81, '3'
Plan:ISDN, Type:Unknown
Sending Complete

#47 Stadt-Tiger

Stadt-Tiger

    Registered User

  • 134 Beiträge

 

Geschrieben 25. Mai 2005 - 08:42

.
.
.
*Mar 1 18:13:58.771: ISDN BR1/1 EVENT: process_rxstate: ces/callid 1/0x83 callt
ype 1 HOST_INCOMING_CALL
*Mar 1 18:13:58.775: ISDN BR1/1 **ERROR**: host_incoming_call: DIALER ERROR 0x1
: b channel 0, call id 0x83
*Mar 1 18:13:58.779: ISDN BR1/1 EVENT: process_rxstate: ces/callid 1/0x83 callt
ype 1 HOST_DISCONNECT_ACK
*Mar 1 18:13:58.783: ISDN BR1/1 Q931: TX -> RELEASE_COMP pd = 8 callref = 0xCD

Cause i = 0x8095 - Call rejected
*Mar 1 18:14:00.238: ISDN BR1/1 Q931: RX <- BAD PACKET()
*Mar 1 18:14:01.736: ISDN BR1/1 Q931: RX <- BAD PACKET()
*Mar 1 18:14:14.705: ISDN BR1/0 EVENT: UserIdle: callid 0x8009 received ISDN_HA
NGUP (0x1)
*Mar 1 18:14:14.705: ISDN BR1/0 **ERROR**: CCBRI_Go: NO CCB Src->HOST call id 0
x8009, event 0x5 ces 1
*Mar 1 18:14:14.705: ISDN BR1/0 EVENT: process_rxstate: ces/callid 1/0x8009 cal

#48 rob_67

rob_67

    Board Veteran

  • 955 Beiträge

 

Geschrieben 25. Mai 2005 - 09:10

aber ein dialer events hast du jetzt noch nicht angehabt, versuch mal bitte ein deb isdn events + debug dialer events und schick nochmal ein sh int bri0 mit

#49 Stadt-Tiger

Stadt-Tiger

    Registered User

  • 134 Beiträge

 

Geschrieben 25. Mai 2005 - 09:31

BRI1/0 is up, line protocol is up (spoofing)
Hardware is BRI
Description: Verbindung Dialer 1
MTU 1500 bytes, BW 64 Kbit, DLY 20000 usec,
reliability 255/255, txload 1/255, rxload 1/255
Encapsulation PPP, loopback not set
Keepalive set (10 sec)
DTR is pulsed for 1 seconds on reset
Last input 00:00:07, output 00:00:07, output hang never
Last clearing of "show interface" counters 19:03:07
Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0
Queueing strategy: weighted fair
Output queue: 0/1000/64/0 (size/max total/threshold/drops)
Conversations 0/1/16 (active/max active/max total)
Reserved Conversations 0/0 (allocated/max allocated)
Available Bandwidth 48 kilobits/sec
5 minute input rate 0 bits/sec, 0 packets/sec
5 minute output rate 0 bits/sec, 0 packets/sec
8762 packets input, 39588 bytes, 0 no buffer
Received 0 broadcasts, 0 runts, 0 giants, 0 throttles
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
8606 packets output, 34842 bytes, 0 underruns
0 output errors, 0 collisions, 0 interface resets
0 output buffer failures, 0 output buffers swapped out
1 carrier transitions

#50 Stadt-Tiger

Stadt-Tiger

    Registered User

  • 134 Beiträge

 

Geschrieben 25. Mai 2005 - 09:33

*Mar 1 19:04:52.405: ISDN BR1/1 Q931: RX <- BAD PACKET()
*Mar 1 19:04:52.425: ISDN BR1/1 Q931: RX <- SETUP pd = 8 callref = 0x4D
Bearer Capability i = 0x8890
Standard = CCITT
Transfer Capability = Unrestricted Digital
Transfer Mode = Circuit
Transfer Rate = 64 kbit/s
Channel ID i = 0x8A
Calling Party Number i = 0x0080, '0123'
Plan:Unknown, Type:Unknown
Called Party Number i = 0x81, '3'
Plan:ISDN, Type:Unknown
Sending Complete
*Mar 1 19:04:52.429: ISDN BR1/1 EVENT: process_rxstate: ces/callid 1/0x84 callt
ype 1 HOST_INCOMING_CALL
*Mar 1 19:04:52.433: Di1 DDR: Caller id: Callback server starting to xxx 0123
*Mar 1 19:04:52.433: Could not obtain author data from the previous call
*Mar 1 19:04:52.437: ISDN BR1/1 **ERROR**: host_incoming_call: DIALER ERROR 0x1
: b channel 1, call id 0x84
*Mar 1 19:04:52.437: ISDN BR1/1 EVENT: process_rxstate: ces/callid 1/0x84 callt
ype 1 HOST_DISCONNECT_ACK
*Mar 1 19:04:52.441: ISDN BR1/1 Q931: TX -> RELEASE_COMP pd = 8 callref = 0xCD

Cause i = 0x8095 - Call rejected
*Mar 1 19:04:53.895: ISDN BR1/1 Q931: RX <- BAD PACKET()
*Mar 1 19:04:55.394: ISDN BR1/1 Q931: RX <- BAD PACKET()
*Mar 1 19:04:57.229: ISDN BR1/0 Q931: RX <- BAD PACKET()
*Mar 1 19:04:57.249: ISDN BR1/0 Q931: RX <- SETUP pd = 8 callref = 0x4E
Bearer Capability i = 0x8890
Standard = CCITT
Transfer Capability = Unrestricted Digital
Transfer Mode = Circuit
Transfer Rate = 64 kbit/s
Channel ID i = 0x89
Calling Party Number i = 0x0080, '0123'
Plan:Unknown, Type:Unknown
Called Party Number i = 0x81, '2'
Plan:ISDN, Type:Unknown
Sending Complete

#51 Stadt-Tiger

Stadt-Tiger

    Registered User

  • 134 Beiträge

 

Geschrieben 25. Mai 2005 - 09:34

*Mar 1 19:04:57.257: ISDN BR1/0 EVENT: process_rxstate: ces/callid 1/0x85 callt
ype 1 HOST_INCOMING_CALL
*Mar 1 19:04:57.257: Di1 DDR: callback to xxx already started
*Mar 1 19:04:57.257: Could not obtain author data from the previous call
*Mar 1 19:04:57.261: ISDN BR1/0 **ERROR**: host_incoming_call: DIALER ERROR 0x1
: b channel 0, call id 0x85
*Mar 1 19:04:57.261: ISDN BR1/0 EVENT: process_rxstate: ces/callid 1/0x85 callt
ype 1 HOST_DISCONNECT_ACK
*Mar 1 19:04:57.265: ISDN BR1/0 Q931: TX -> RELEASE_COMP pd = 8 callref = 0xCE

Cause i = 0x8095 - Call rejected
*Mar 1 19:04:58.715: ISDN BR1/0 Q931: RX <- BAD PACKET()
*Mar 1 19:05:00.214: ISDN BR1/0 Q931: RX <- BAD PACKET()
*Mar 1 19:05:02.041: ISDN BR1/0 Q931: RX <- BAD PACKET()
*Mar 1 19:05:02.061: ISDN BR1/0 Q931: RX <- SETUP pd = 8 callref = 0x4D
Bearer Capability i = 0x8890
Standard = CCITT
Transfer Capability = Unrestricted Digital
Transfer Mode = Circuit
Transfer Rate = 64 kbit/s
Channel ID i = 0x8A
Calling Party Number i = 0x0080, '03139630'
Plan:Unknown, Type:Unknown
Called Party Number i = 0x81, '3'
Plan:ISDN, Type:Unknown
Sending Complete

#52 rob_67

rob_67

    Board Veteran

  • 955 Beiträge

 

Geschrieben 25. Mai 2005 - 09:36

also ich werd nicht so richtig schlau aus der ganzen geschichte, ich würde einfach mal ein anderes ios, wenn verfügbar, probieren

#53 Stadt-Tiger

Stadt-Tiger

    Registered User

  • 134 Beiträge

 

Geschrieben 25. Mai 2005 - 11:27

Hallo Rob,

leider habe ich kein weiteres IOS.

Liebe Grüße

#54 rob_67

rob_67

    Board Veteran

  • 955 Beiträge

 

Geschrieben 25. Mai 2005 - 12:09

Hallo Stadt Tiger, wie ist den jetzt der Stand, geht es sporadisch, dauert es sehr lange für den Verbindungsaufbau oder geht es gar nicht mehr?

#55 Stadt-Tiger

Stadt-Tiger

    Registered User

  • 134 Beiträge

 

Geschrieben 25. Mai 2005 - 13:18

Hallo Rob,

es geht jetzt garnicht mehr. :(

Liebe Grüße

#56 rob_67

rob_67

    Board Veteran

  • 955 Beiträge

 

Geschrieben 25. Mai 2005 - 13:21

boot doch mal den router, wenns dann wieder geht, wäre ein neues ios schon sinnvoll

#57 Stadt-Tiger

Stadt-Tiger

    Registered User

  • 134 Beiträge

 

Geschrieben 25. Mai 2005 - 14:46

Neu gestartet habe ich den Router bereits und einwählen kann man sich, wenn man nicht gerade in einer der externen Stellen sitzt. Aber ich habe zum Glück gestern demonstriert, dass es läuft...