Jump to content

Routen klappt nur ein wenig


Der letzte Beitrag zu diesem Thema ist mehr als 180 Tage alt. Bitte erstelle einen neuen Beitrag zu Deiner Anfrage!

Empfohlene Beiträge

Und hier debug von q931

 

*Mar 1 18:12:40.515: ISDN BR1/0 **ERROR**: host_incoming_call: DIALER ERROR 0x1

: b channel 0, call id 0x73

*Mar 1 18:12:40.519: ISDN BR1/0 EVENT: process_rxstate: ces/callid 1/0x73 callt

ype 1 HOST_DISCONNECT_ACK

*Mar 1 18:12:40.523: ISDN BR1/0 Q931: TX -> RELEASE_COMP pd = 8 callref = 0xCD

 

Cause i = 0x8095 - Call rejected

*Mar 1 18:12:41.973: ISDN BR1/0 Q931: RX <- BAD PACKET()

*Mar 1 18:12:43.476: ISDN BR1/0 Q931: RX <- BAD PACKET()

*Mar 1 18:12:45.311: ISDN BR1/0 Q931: RX <- BAD PACKET()

*Mar 1 18:12:45.335: ISDN BR1/0 Q931: RX <- SETUP pd = 8 callref = 0x4E

Bearer Capability i = 0x8890

Standard = CCITT

Transfer Capability = Unrestricted Digital

Transfer Mode = Circuit

Transfer Rate = 64 kbit/s

Channel ID i = 0x8A

Calling Party Number i = 0x0080, '0123'

Plan:Unknown, Type:Unknown

Called Party Number i = 0x81, '3'

Plan:ISDN, Type:Unknown

Sending Complete

*Mar 1 18:12:45.339: ISDN BR1/0 EVENT: process_rxstate: ces/callid 1/0x74 callt

ype 1 HOST_INCOMING_CALL

*Mar 1 18:12:45.343: ISDN BR1/0 **ERROR**: host_incoming_call: DIALER ERROR 0x1

: b channel 1, call id 0x74

*Mar 1 18:12:45.347: ISDN BR1/0 EVENT: process_rxstate: ces/callid 1/0x74 callt

ype 1 HOST_DISCONNECT_ACK

*Mar 1 18:12:45.347: ISDN BR1/0 Q931: TX -> RELEASE_COMP pd = 8 callref = 0xCE

 

Cause i = 0x8095 - Call rejected

*Mar 1 18:12:46.793: ISDN BR1/0 Q931: RX <- BAD PACKET()

*Mar 1 18:12:48.296: ISDN BR1/0 Q931: RX <- BAD PACKET()

*Mar 1 18:12:50.167: ISDN BR1/2 Q931: RX <- BAD PACKET()

*Mar 1 18:12:50.187: ISDN BR1/2 Q931: RX <- SETUP pd = 8 callref = 0x4D

Bearer Capability i = 0x8890

Standard = CCITT

Transfer Capability = Unrestricted Digital

Transfer Mode = Circuit

Transfer Rate = 64 kbit/s

Channel ID i = 0x89

Calling Party Number i = 0x0080, '0123'

Plan:Unknown, Type:Unknown

Called Party Number i = 0x81, '2'

Plan:ISDN, Type:Unknown

Sending Complete

*Mar 1 18:12:50.195: ISDN BR1/2 EVENT: process_rxstate: ces/callid 1/0x75 callt

ype 1 HOST_INCOMING_CALL

*Mar 1 18:12:50.199: ISDN BR1/2 **ERROR**: host_incoming_call: DIALER ERROR 0x1

: b channel 0, call id 0x75

*Mar 1 18:12:50.199: ISDN BR1/2 EVENT: process_rxstate: ces/callid 1/0x75 callt

ype 1 HOST_DISCONNECT_ACK

*Mar 1 18:12:50.203: ISDN BR1/2 Q931: TX -> RELEASE_COMP pd = 8 callref = 0xCD

 

Cause i = 0x8095 - Call rejected

*Mar 1 18:12:51.653: ISDN BR1/2 Q931: RX <- BAD PACKET()

*Mar 1 18:12:53.156: ISDN BR1/2 Q931: RX <- BAD PACKET()

*Mar 1 18:12:55.011: ISDN BR1/2 Q931: RX <- BAD PACKET()

*Mar 1 18:12:55.031: ISDN BR1/2 Q931: RX <- SETUP pd = 8 callref = 0x4E

Bearer Capability i = 0x8890

Standard = CCITT

Transfer Capability = Unrestricted Digital

Transfer Mode = Circuit

Transfer Rate = 64 kbit/s

Channel ID i = 0x8A

Calling Party Number i = 0x0080, '0123'

Plan:Unknown, Type:Unknown

Called Party Number i = 0x81, '3'

Plan:ISDN, Type:Unknown

Sending Complete

Link zu diesem Kommentar

.

.

.

*Mar 1 18:13:58.771: ISDN BR1/1 EVENT: process_rxstate: ces/callid 1/0x83 callt

ype 1 HOST_INCOMING_CALL

*Mar 1 18:13:58.775: ISDN BR1/1 **ERROR**: host_incoming_call: DIALER ERROR 0x1

: b channel 0, call id 0x83

*Mar 1 18:13:58.779: ISDN BR1/1 EVENT: process_rxstate: ces/callid 1/0x83 callt

ype 1 HOST_DISCONNECT_ACK

*Mar 1 18:13:58.783: ISDN BR1/1 Q931: TX -> RELEASE_COMP pd = 8 callref = 0xCD

 

Cause i = 0x8095 - Call rejected

*Mar 1 18:14:00.238: ISDN BR1/1 Q931: RX <- BAD PACKET()

*Mar 1 18:14:01.736: ISDN BR1/1 Q931: RX <- BAD PACKET()

*Mar 1 18:14:14.705: ISDN BR1/0 EVENT: UserIdle: callid 0x8009 received ISDN_HA

NGUP (0x1)

*Mar 1 18:14:14.705: ISDN BR1/0 **ERROR**: CCBRI_Go: NO CCB Src->HOST call id 0

x8009, event 0x5 ces 1

*Mar 1 18:14:14.705: ISDN BR1/0 EVENT: process_rxstate: ces/callid 1/0x8009 cal

Link zu diesem Kommentar

BRI1/0 is up, line protocol is up (spoofing)

Hardware is BRI

Description: Verbindung Dialer 1

MTU 1500 bytes, BW 64 Kbit, DLY 20000 usec,

reliability 255/255, txload 1/255, rxload 1/255

Encapsulation PPP, loopback not set

Keepalive set (10 sec)

DTR is pulsed for 1 seconds on reset

Last input 00:00:07, output 00:00:07, output hang never

Last clearing of "show interface" counters 19:03:07

Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0

Queueing strategy: weighted fair

Output queue: 0/1000/64/0 (size/max total/threshold/drops)

Conversations 0/1/16 (active/max active/max total)

Reserved Conversations 0/0 (allocated/max allocated)

Available Bandwidth 48 kilobits/sec

5 minute input rate 0 bits/sec, 0 packets/sec

5 minute output rate 0 bits/sec, 0 packets/sec

8762 packets input, 39588 bytes, 0 no buffer

Received 0 broadcasts, 0 runts, 0 giants, 0 throttles

0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort

8606 packets output, 34842 bytes, 0 underruns

0 output errors, 0 collisions, 0 interface resets

0 output buffer failures, 0 output buffers swapped out

1 carrier transitions

Link zu diesem Kommentar

*Mar 1 19:04:52.405: ISDN BR1/1 Q931: RX <- BAD PACKET()

*Mar 1 19:04:52.425: ISDN BR1/1 Q931: RX <- SETUP pd = 8 callref = 0x4D

Bearer Capability i = 0x8890

Standard = CCITT

Transfer Capability = Unrestricted Digital

Transfer Mode = Circuit

Transfer Rate = 64 kbit/s

Channel ID i = 0x8A

Calling Party Number i = 0x0080, '0123'

Plan:Unknown, Type:Unknown

Called Party Number i = 0x81, '3'

Plan:ISDN, Type:Unknown

Sending Complete

*Mar 1 19:04:52.429: ISDN BR1/1 EVENT: process_rxstate: ces/callid 1/0x84 callt

ype 1 HOST_INCOMING_CALL

*Mar 1 19:04:52.433: Di1 DDR: Caller id: Callback server starting to xxx 0123

*Mar 1 19:04:52.433: Could not obtain author data from the previous call

*Mar 1 19:04:52.437: ISDN BR1/1 **ERROR**: host_incoming_call: DIALER ERROR 0x1

: b channel 1, call id 0x84

*Mar 1 19:04:52.437: ISDN BR1/1 EVENT: process_rxstate: ces/callid 1/0x84 callt

ype 1 HOST_DISCONNECT_ACK

*Mar 1 19:04:52.441: ISDN BR1/1 Q931: TX -> RELEASE_COMP pd = 8 callref = 0xCD

 

Cause i = 0x8095 - Call rejected

*Mar 1 19:04:53.895: ISDN BR1/1 Q931: RX <- BAD PACKET()

*Mar 1 19:04:55.394: ISDN BR1/1 Q931: RX <- BAD PACKET()

*Mar 1 19:04:57.229: ISDN BR1/0 Q931: RX <- BAD PACKET()

*Mar 1 19:04:57.249: ISDN BR1/0 Q931: RX <- SETUP pd = 8 callref = 0x4E

Bearer Capability i = 0x8890

Standard = CCITT

Transfer Capability = Unrestricted Digital

Transfer Mode = Circuit

Transfer Rate = 64 kbit/s

Channel ID i = 0x89

Calling Party Number i = 0x0080, '0123'

Plan:Unknown, Type:Unknown

Called Party Number i = 0x81, '2'

Plan:ISDN, Type:Unknown

Sending Complete

Link zu diesem Kommentar

*Mar 1 19:04:57.257: ISDN BR1/0 EVENT: process_rxstate: ces/callid 1/0x85 callt

ype 1 HOST_INCOMING_CALL

*Mar 1 19:04:57.257: Di1 DDR: callback to xxx already started

*Mar 1 19:04:57.257: Could not obtain author data from the previous call

*Mar 1 19:04:57.261: ISDN BR1/0 **ERROR**: host_incoming_call: DIALER ERROR 0x1

: b channel 0, call id 0x85

*Mar 1 19:04:57.261: ISDN BR1/0 EVENT: process_rxstate: ces/callid 1/0x85 callt

ype 1 HOST_DISCONNECT_ACK

*Mar 1 19:04:57.265: ISDN BR1/0 Q931: TX -> RELEASE_COMP pd = 8 callref = 0xCE

 

Cause i = 0x8095 - Call rejected

*Mar 1 19:04:58.715: ISDN BR1/0 Q931: RX <- BAD PACKET()

*Mar 1 19:05:00.214: ISDN BR1/0 Q931: RX <- BAD PACKET()

*Mar 1 19:05:02.041: ISDN BR1/0 Q931: RX <- BAD PACKET()

*Mar 1 19:05:02.061: ISDN BR1/0 Q931: RX <- SETUP pd = 8 callref = 0x4D

Bearer Capability i = 0x8890

Standard = CCITT

Transfer Capability = Unrestricted Digital

Transfer Mode = Circuit

Transfer Rate = 64 kbit/s

Channel ID i = 0x8A

Calling Party Number i = 0x0080, '03139630'

Plan:Unknown, Type:Unknown

Called Party Number i = 0x81, '3'

Plan:ISDN, Type:Unknown

Sending Complete

Link zu diesem Kommentar
Der letzte Beitrag zu diesem Thema ist mehr als 180 Tage alt. Bitte erstelle einen neuen Beitrag zu Deiner Anfrage!

Schreibe einen Kommentar

Du kannst jetzt antworten und Dich später registrieren. Falls Du bereits ein Mitglied bist, logge Dich jetzt ein.

Gast
Auf dieses Thema antworten...

×   Du hast formatierten Text eingefügt.   Formatierung jetzt entfernen

  Only 75 emoji are allowed.

×   Dein Link wurde automatisch eingebettet.   Einbetten rückgängig machen und als Link darstellen

×   Dein vorheriger Inhalt wurde wiederhergestellt.   Editor-Fenster leeren

×   Du kannst Bilder nicht direkt einfügen. Lade Bilder hoch oder lade sie von einer URL.

×
×
  • Neu erstellen...