Jump to content

Windows 2008 R2 TS Cluster


Der letzte Beitrag zu diesem Thema ist mehr als 180 Tage alt. Bitte erstelle einen neuen Beitrag zu Deiner Anfrage!

Empfohlene Beiträge

Hallo zusammen,

 

ich habe bei meinem TS Cluster (Round Robin) ein ziemlich merkwürdiges anmeldeverhalten.

Wenn ich mich per mstsc von einem Client an rdsfarm.domain.local anmelde, werde ich nach meinem benutzernamen und password gefragt. direkt danach kommt gleiches bild nocheinmal und ich muss mich ein zweites mal authentifizieren.

Erst dann werde ich eingeloggt.

 

Jetzt die frage, wo kommt die erste anmeldung her, oder warum gibt es eine zweite?

 

Es sieht fast so aus, als ob ich mich an sitzungshost anmelden muss und dieser dann meine anfrage an den eigenltichen TS Server weiterleitet und dieser mich fragt, wer ich denn nun bin ;)

 

Hoffe ihr wisst, was ich meine

 

Gruß

 

Ditro

Link zu diesem Kommentar
  • 2 Monate später...

Bei welchen Betriebssystemen tritt das den bei euch auf?

 

Ich hatte noch etwas dazu gefunden habe aber leider die Quelle dazu nicht mehr.

 

As someone else has said, the problem is caused by the way that the session broker and network load balancer work together. When you connect to the farm, the load balancer will connect you to one of the servers. You then have to login for the session broker to know who you are and where to place your session. If it decides to place your session on a different server to the one that network load balancer connected you to, you get a second login prompt.

 

To resolve this, you need to get the client to handle the authentication. For XP clients, you will need to enable Network Level Authentication and you will need SP3 installed with Remote Desktop Client at least v6.1 to do that.

 

To check if Network Level Authentication is enabled, open the remote desktop client, right-click in the title bar and choose About. If it says Network Level Authentication Not Supported, you will need to enable it as follows:

 

- Browse to HKLM\SYSTEM\CurrentControlSet\Control\Lsa

 

- Locate Security Packages and add tspkg to the bottom of the list

 

- Browse to HKLM\System\CurrentControlSet\Control\SecurityProv iders

 

- Locate Security Providers and add , credssp.dll at the end

 

- Restart the computer

 

- Now check that Network Level Authentication is enabled as above

 

In the RDP file that you use to connect, make sure you've got the following settings:

 

authentication level:i:0

prompt for credentials:i:0

promptcredentialonce:i:1

enablecredsspsupport:i:1

 

 

Gruß

 

tcpip

Link zu diesem Kommentar
  • 3 Wochen später...
wenn sie nicht grade zufällig auf dem TS landen, der auch das NLB macht.

Was meinst du damit?

 

NLB sollte bei beiden RDS-Hosts installiert sein. Einrichten kannst du es dann von einem aus.

 

Wie sieht deine IP-Konfig dann aus? Hier ein Bsp.

RDS1=192.168.50.11

RDS2=192.168.50.12

NLB-ClusterIP= 192.168.50.10 (dies ist auch die IP des Farmnamens)

Link zu diesem Kommentar
Der letzte Beitrag zu diesem Thema ist mehr als 180 Tage alt. Bitte erstelle einen neuen Beitrag zu Deiner Anfrage!

Schreibe einen Kommentar

Du kannst jetzt antworten und Dich später registrieren. Falls Du bereits ein Mitglied bist, logge Dich jetzt ein.

Gast
Auf dieses Thema antworten...

×   Du hast formatierten Text eingefügt.   Formatierung jetzt entfernen

  Only 75 emoji are allowed.

×   Dein Link wurde automatisch eingebettet.   Einbetten rückgängig machen und als Link darstellen

×   Dein vorheriger Inhalt wurde wiederhergestellt.   Editor-Fenster leeren

×   Du kannst Bilder nicht direkt einfügen. Lade Bilder hoch oder lade sie von einer URL.

×
×
  • Neu erstellen...