Problem bei Alice DSL mit Cisco Router SOHO96

tecker2010 · 16. September 2009

Hallo,

ich versuche mit meinem SOHO 96 eine Verbindung ins Internet zu bekommen und scheitere ein wenig. Hab diverse Sachen und Konfigurationen probiert, aber nun fehlt mir das weitere Know-How um die Ursache ausfindig zu machen ...

Die Einwahl bei Alice funktioniert ja lediglich mit der Anschlussnummer/Telefonnummer und frei wählbaren Passwort.

CD LED am Cisco ist permanent grün, also Sync geht demnach. Ping ins Internet bleibt erfolglos. Ich habe das IOS soho96-k9oy1-mz.123-8.YG2.bin ..

12.3(10.3)T2

Meine Config:

soho96#sh run
Building configuration...

Current configuration : 3020 bytes
!
version 12.3
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
service password-encryption
!
hostname soho96
!
boot-start-marker
boot-end-marker
!
memory-size iomem 5
logging buffered 8000 debugging
enable secret 5 XXXXX
!
username tecker2010 privilege 15 password 7 XXXXXXXX
ip subnet-zero
!
!
ip tcp mss 1452
ip name-server 217.237.149.225
ip ssh time-out 60
no aaa new-model
isdn switch-type basic-net3
!
!
!
interface Ethernet0
ip address 10.255.253.1 255.255.255.0
ip nat inside
no ip route-cache
ip tcp adjust-mss 1452
!
interface BRI0
no ip address
encapsulation ppp
shutdown
dialer pool-member 2
isdn switch-type basic-net3
ppp authentication pap
!
interface ATM0
no ip address
no ip route-cache
atm vc-per-vp 64
no atm ilmi-keepalive
dsl operating-mode auto
pvc 1/32
 oam-pvc 0
 pppoe-client dial-pool-number 1
!
!
interface Dialer1
ip address negotiated
ip access-group 111 in
ip access-group 100 out
ip nat outside
encapsulation ppp
dialer pool 1
dialer-group 1
no cdp enable
ppp authentication pap callin
ppp pap sent-username TELEFONNUMMER password 7 IRGENDWAS
ppp ipcp dns request
ppp ipcp wins request
!
no ip classless
ip route 0.0.0.0 0.0.0.0 Dialer1
ip http server
no ip http secure-server
!
ip nat inside source list 1 interface Dialer1 overload
!
access-list 1 permit 10.0.0.0 0.255.255.255
access-list 100 permit ip 10.0.0.0 0.255.255.255 any
access-list 100 permit tcp 10.0.0.0 0.255.255.255 any
access-list 100 permit udp 10.0.0.0 0.255.255.255 any
access-list 111 permit icmp any any echo
[...]
access-list 111 deny   ip any any
dialer-list 1 protocol ip list 101
!
control-plane
!
!
line con 0
exec-timeout 0 0
logging synchronous
login local
transport preferred all
transport output all
stopbits 1
line vty 0 4
exec-timeout 0 0
login local
transport preferred all
transport input all
transport output all
!
scheduler max-task-time 5000
no rcapi server
!
!
end

sh dsl int atm0:


               ATU-R (DS)                      ATU-C (US)
Modem Status:    Showtime (DMTDSL_SHOWTIME)
DSL Mode:        AnnexB (Deutsche Telekom U-r2)
ITU STD NUM:     0x01                            0x01
Vendor ID:       'ALCB'                          'IFTN'
Vendor Specific: 0x0000                          0x7178
Vendor Country:  0x00                            0xB5
Capacity Used:   96%                             98%
Noise Margin:     8.5 dB                          7.0 dB
Output Power:    14.5 dBm                        11.0 dBm
Attenuation:      3.0 dB                          6.5 dB
Defect Status:   None                            None
Last Fail Code:  Protocol error
Selftest Result: 0x00
Subfunction:     0x11
Interrupts:      3182 (5 spurious)
Activations:     5
Init FW:         embedded
Operartion FW:   embedded
SW Version:      4.10.1
FW Version:      0x1A04

Wäre toll wenn jemanden den passend Tip für mich hat.

tecker2010 · 16. September 2009

debug atm er

debug atm ev

debug pppoe er

debug pppoe ev

*Feb 22 02:36:19.463: DSL: 4: Modem state = 0x8
*Feb 22 02:36:21.963: DSL: 5: Modem state = 0x8
*Feb 22 02:36:24.463: DSL: 6: Modem state = 0x8
*Feb 22 02:36:26.963: DSL: 7: Modem state = 0x10
*Feb 22 02:36:27.267: DSL: Received response: 0x22
*Feb 22 02:36:27.267: DSL: Open failed: Protocol error received -- retrying
*Feb 22 02:36:27.267: DSL: Modem has open failed for 1 time(s)
*Feb 22 02:36:30.267: DSL: Trying to bring up DSL line using Embedded firmware version : 4.10.1
*Feb 22 02:36:30.267: DSL: Send ADSL_OPEN command.
*Feb 22 02:36:30.267: DSL: Using subfunction 0x11
*Feb 22 02:36:30.267: DSL: Using subfunction 0x11
*Feb 22 02:36:30.267: LOCAL:Max noise margin for power cutoff 31
*Feb 22 02:36:30.267: DSL: Sent command 0x6
*Feb 22 02:36:30.299:  padi timer expired
*Feb 22 02:36:32.767: DSL: 1: Modem state = 0x8
*Feb 22 02:36:35.267: DSL: 2: Modem state = 0x8
*Feb 22 02:36:36.823: DSL: Received response: 0x22
*Feb 22 02:36:36.823: DSL: Open failed: Protocol error received -- retrying
*Feb 22 02:36:36.823: DSL: Modem has open failed for 2 time(s)
*Feb 22 02:36:39.823: DSL: Trying to bring up DSL line using Embedded firmware version : 4.10.1
*Feb 22 02:36:39.823: DSL: Send ADSL_OPEN command.
*Feb 22 02:36:39.823: DSL: Using subfunction 0x11
*Feb 22 02:36:39.823: DSL: Using subfunction 0x11
*Feb 22 02:36:39.823: LOCAL:Max noise margin for power cutoff 31
*Feb 22 02:36:39.823: DSL: Sent command 0x6
*Feb 22 02:36:42.323: DSL: 1: Modem state = 0x8
*Feb 22 02:36:44.823: DSL: 2: Modem state = 0x8
*Feb 22 02:36:46.411: DSL: Received response: 0x22
*Feb 22 02:36:46.411: DSL: Open failed: Protocol error received -- retrying
*Feb 22 02:36:46.411: DSL: Modem has open failed for 3 time(s)
*Feb 22 02:36:49.411: DSL: Trying to bring up DSL line using Embedded firmware version : 4.10.1
*Feb 22 02:36:49.411: DSL: Send ADSL_OPEN command.
*Feb 22 02:36:49.411: DSL: Using subfunction 0x11
*Feb 22 02:36:49.411: DSL: Using subfunction 0x11
*Feb 22 02:36:49.411: LOCAL:Max noise margin for power cutoff 31
*Feb 22 02:36:49.411: DSL: Sent command 0x6
*Feb 22 02:36:51.911: DSL: 1: Modem state = 0x8
*Feb 22 02:36:54.411: DSL: 2: Modem state = 0x8
*Feb 22 02:36:56.911: DSL: 3: Modem state = 0x10
*Feb 22 02:36:59.411: DSL: 4: Modem state = 0x10
*Feb 22 02:37:01.911: DSL: 5: Modem state = 0x10
*Feb 22 02:37:02.631:  padi timer expired
*Feb 22 02:37:03.767: DSL: Received response: 0x24
*Feb 22 02:37:03.767: DSL: DSL line trained using Embedded firmware version : 4.10.1
*Feb 22 02:37:03.767: DSL: Showtime!
*Feb 22 02:37:03.767: DSL: Sent command 0x11
*Feb 22 02:37:03.771: DSL: Received response: 0x61
*Feb 22 02:37:03.771: DSL: Read firmware revision 0x1A04
*Feb 22 02:37:03.771: DSL: Sent command 0x31
*Feb 22 02:37:03.775: DSL: Received response: 0x12
*Feb 22 02:37:03.775: DSL: operation mode 0x0002
*Feb 22 02:37:03.775: DSL: Sent command 0x33
*Feb 22 02:37:03.783: DSL: Received response: 0x16
*Feb 22 02:37:03.783: DSL: Far End ITU Country Code 0xB5
*Feb 22 02:37:03.783: DSL: Far End ITU Vendor ID IFTN
*Feb 22 02:37:03.783: DSL: Far End ITU Vendor ID Specific 0x7178
*Feb 22 02:37:03.783: DSL: Far End ITU Vendor STD Number 0x0001
*Feb 22 02:37:03.783: DSL: Sent command 0x32
*Feb 22 02:37:03.787: DSL: Received response: 0x14
*Feb 22 02:37:03.787: DSL: Near End ITU Country Code 0x00
*Feb 22 02:37:03.787: DSL: Near End ITU Vendor ID ALCB
*Feb 22 02:37:03.787: DSL: Near End ITU Vendor ID Specific 0x0000
*Feb 22 02:37:03.787: DSL: Near End ITU Vendor STD Number 0x0001
*Feb 22 02:37:03.787: DSL: SM: [DMTDSL_DO_OPEN -> DMTDSL_SHOWTIME]
*Feb 22 02:37:04.547: Resetting ATM0
*Feb 22 02:37:06.295: %LINK-3-UPDOWN: Interface ATM0, changed state to up
*Feb 22 02:37:07.295: %LINEPROTO-5-UPDOWN: Line protocol on Interface ATM0, changed state to up

Wordo · 16. September 2009

Wenn das Teil synchron ist bitte noch ein Debug von:

deb ppp neg

deb ppp auth

deb ppp err

tecker2010 · 16. September 2009

*Feb 22 03:10:00.659: %DIALER-6-BIND: Interface Vi1 bound to profile Di1
*Feb 22 03:10:00.659: Vi1 PPP: Phase is DOWN, Setup
*Feb 22 03:10:00.663: Vi1 PPP: Using dialer call direction
*Feb 22 03:10:00.663: Vi1 PPP: Treating connection as a callout
*Feb 22 03:10:00.663: Vi1 PPP: Phase is ESTABLISHING, Active Open
*Feb 22 03:10:00.663: Vi1 PPP: Authorization required
*Feb 22 03:10:00.663: Vi1 PPP: No remote authentication for call-out
*Feb 22 03:10:00.663: Vi1 LCP: O CONFREQ [Closed] id 1 len 10
*Feb 22 03:10:00.663: Vi1 LCP:    MagicNumber 0x0F4B2895 (0x05060F4B2895)
*Feb 22 03:10:00.667: %LINK-3-UPDOWN: Interface Virtual-Access1, changed state to up
*Feb 22 03:10:00.859: Vi1 LCP: I CONFREQ [REQsent] id 78 len 19
*Feb 22 03:10:00.859: Vi1 LCP:    MRU 1492 (0x010405D4)
*Feb 22 03:10:00.859: Vi1 LCP:    AuthProto CHAP (0x0305C22305)
*Feb 22 03:10:00.859: Vi1 LCP:    MagicNumber 0x20625708 (0x050620625708)
*Feb 22 03:10:00.859: Vi1 LCP: O CONFNAK [REQsent] id 78 len 8
*Feb 22 03:10:00.859: Vi1 LCP:    MRU 1500 (0x010405DC)
*Feb 22 03:10:00.863: Vi1 LCP: I CONFACK [REQsent] id 1 len 10
*Feb 22 03:10:00.863: Vi1 LCP:    MagicNumber 0x0F4B2895 (0x05060F4B2895)
*Feb 22 03:10:00.887: Vi1 LCP: I CONFREQ [ACKrcvd] id 79 len 19
*Feb 22 03:10:00.887: Vi1 LCP:    MRU 1492 (0x010405D4)
*Feb 22 03:10:00.887: Vi1 LCP:    AuthProto CHAP (0x0305C22305)
*Feb 22 03:10:00.887: Vi1 LCP:    MagicNumber 0x20625708 (0x050620625708)
*Feb 22 03:10:00.887: Vi1 LCP: O CONFNAK [ACKrcvd] id 79 len 8
*Feb 22 03:10:00.887: Vi1 LCP:    MRU 1500 (0x010405DC)
*Feb 22 03:10:00.907: Vi1 LCP: I CONFREQ [ACKrcvd] id 80 len 19
*Feb 22 03:10:00.911: Vi1 LCP:    MRU 1492 (0x010405D4)
*Feb 22 03:10:00.911: Vi1 LCP:    AuthProto CHAP (0x0305C22305)
*Feb 22 03:10:00.911: Vi1 LCP:    MagicNumber 0x20625708 (0x050620625708)
*Feb 22 03:10:00.911: Vi1 LCP: O CONFNAK [ACKrcvd] id 80 len 8
*Feb 22 03:10:00.911: Vi1 LCP:    MRU 1500 (0x010405DC)
*Feb 22 03:10:00.931: Vi1 LCP: I CONFREQ [ACKrcvd] id 81 len 19
*Feb 22 03:10:00.935: Vi1 LCP:    MRU 1492 (0x010405D4)
*Feb 22 03:10:00.935: Vi1 LCP:    AuthProto CHAP (0x0305C22305)
*Feb 22 03:10:00.935: Vi1 LCP:    MagicNumber 0x20625708 (0x050620625708)
*Feb 22 03:10:00.935: Vi1 LCP: O CONFNAK [ACKrcvd] id 81 len 8
*Feb 22 03:10:00.935: Vi1 LCP:    MRU 1500 (0x010405DC)
*Feb 22 03:10:00.963: Vi1 LCP: I CONFREQ [ACKrcvd] id 82 len 19
*Feb 22 03:10:00.963: Vi1 LCP:    MRU 1492 (0x010405D4)
*Feb 22 03:10:00.963: Vi1 LCP:    AuthProto CHAP (0x0305C22305)
*Feb 22 03:10:00.963: Vi1 LCP:    MagicNumber 0x20625708 (0x050620625708)

tecker2010 · 16. September 2009

*Feb 22 03:10:00.963: Vi1 LCP: O CONFNAK [ACKrcvd] id 82 len 8
*Feb 22 03:10:00.963: Vi1 LCP:    MRU 1500 (0x010405DC)
*Feb 22 03:10:00.983: Vi1 LCP: I CONFREQ [ACKrcvd] id 83 len 19
*Feb 22 03:10:00.983: Vi1 LCP:    MRU 1492 (0x010405D4)
*Feb 22 03:10:00.983: Vi1 LCP:    AuthProto CHAP (0x0305C22305)
*Feb 22 03:10:00.983: Vi1 LCP:    MagicNumber 0x20625708 (0x050620625708)
*Feb 22 03:10:00.987: Vi1 LCP: O CONFREJ [ACKrcvd] id 83 len 8
*Feb 22 03:10:00.987: Vi1 LCP:    MRU 1492 (0x010405D4)
*Feb 22 03:10:01.007: Vi1 LCP: I CONFREQ [ACKrcvd] id 84 len 15
*Feb 22 03:10:01.011: Vi1 LCP:    AuthProto CHAP (0x0305C22305)
*Feb 22 03:10:01.011: Vi1 LCP:    MagicNumber 0x20625708 (0x050620625708)
*Feb 22 03:10:01.011: Vi1 LCP: O CONFACK [ACKrcvd] id 84 len 15
*Feb 22 03:10:01.011: Vi1 LCP:    AuthProto CHAP (0x0305C22305)
*Feb 22 03:10:01.011: Vi1 LCP:    MagicNumber 0x20625708 (0x050620625708)
*Feb 22 03:10:01.011: Vi1 LCP: State is Open
*Feb 22 03:10:01.011: Vi1 PPP: No authorization without authentication
*Feb 22 03:10:01.011: Vi1 PPP: Phase is AUTHENTICATING, by the peer
*Feb 22 03:10:01.039: Vi1 CHAP: I CHALLENGE id 98 len 44 from "BRUN-BX-0001-01-02"
*Feb 22 03:10:01.039: Vi1 CHAP: Unable to authenticate for peer
*Feb 22 03:10:01.039: Vi1 PPP: Sending Acct Event[Down] id[30]
*Feb 22 03:10:01.043: Vi1 PPP: Phase is TERMINATING
*Feb 22 03:10:01.043: Vi1 LCP: O TERMREQ [Open] id 2 len 4
*Feb 22 03:10:01.067: Vi1 LCP: I TERMACK [TERMsent] id 2 len 4
*Feb 22 03:10:01.067: Vi1 LCP: State is Closed
*Feb 22 03:10:01.067: Vi1 PPP: Phase is DOWN
*Feb 22 03:10:01.067: %DIALER-6-UNBIND: Interface Vi1 unbound from profile Di1
*Feb 22 03:10:01.071: %LINK-3-UPDOWN: Interface Virtual-Access1, changed state to down

Wordo · 16. September 2009

Mach mal ip classless an und deine dialer-list zeigt auf eine ACL die nicht existiert. Wegen den Zugangsdaten wuerd ich nochmal schaun, da laeuft was falsch.

Servidge · 16. September 2009

In deiner Config des Dialer1 ist authentication pap configuriert.

Die Plattform will aber nach dem Debug chap.

Ändere das mal ab oder füge den chap teil hinzu.

tecker2010 · 16. September 2009

Das sieht schonmal gut aus. Ping geht durch, allerdings nur vom Router und noch nicht vom dahitner hängenden Client (10.255.253.73) Der will noch nicht mit dem Internet kommunizieren, obwohl sich Router und Client "kennen".

Denke es liegt an den Access-Listen die muss ich mir dann noch mal genauer ansehen.

Hatte PAP in CHAP getauscht.

Danke.

Wordo · 16. September 2009

Ich denk mal es liegt an der 100er ACL, binde die auf ETH0 in und nicht Dialer1 out

tecker2010 · 17. September 2009

Danke! Funktioniert soweit. Eine Frage hab ich allerdings noch ...

Domainanfragen vom Client werden nicht vom Router aufgelöst, sondern das surfen geht nur wenn ich in den LAN-Einstellungen vom Notebook den DNS Server mit eintrage (Router selbst ist primärer DNS).

Ich dachte mit ip domain lookup, ip name-server IP-ADRESSE und den entsprechenden ACL Angaben für domain soltle es klappen.

Ein ping heise online vom Router geht aber nicht vom Client. Hier nochmal die Konfig.

Viele Grüße

Current configuration : 2728 bytes
!
version 12.3
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
service password-encryption
!
hostname soho96
!
boot-start-marker
boot-end-marker
!
memory-size iomem 5
logging buffered 8000 debugging
enable secret 5 XXX
!
username cisco privilege 15 password 7 XXX
username gast privilege 15 password 7 XXX
username tecker2010 privilege 15 password 7 XXX
ip subnet-zero
!
!
ip tcp mss 1452
ip name-server 213.191.92.84
ip name-server 213.191.74.12
ip ssh time-out 60
no aaa new-model
isdn switch-type basic-net3
!
!
!
!
!
!
!
interface Ethernet0
ip address 10.255.253.1 255.255.255.0
ip access-group 100 in
ip nat inside
no ip route-cache
ip tcp adjust-mss 1452
!
interface BRI0
no ip address
encapsulation ppp
shutdown
dialer pool-member 2
isdn switch-type basic-net3
ppp authentication pap
!
interface ATM0
no ip address
no ip route-cache
atm vc-per-vp 64
no atm ilmi-keepalive
dsl operating-mode auto
pvc 1/32
 oam-pvc 0
 pppoe-client dial-pool-number 1
!
!
interface Dialer1
description T-DSL_PPPOE_Dial_In
ip address negotiated
ip access-group 111 in
ip nat outside
encapsulation ppp
dialer pool 1
dialer-group 1
no cdp enable
ppp chap hostname XXX
ppp chap password 7 XXX
ppp ipcp dns request
ppp ipcp wins request
!
no ip classless
ip route 0.0.0.0 0.0.0.0 Dialer1
ip http server
no ip http secure-server
!
ip nat inside source list 1 interface Dialer1 overload
!
access-list 1 permit 10.255.253.0 0.0.0.255
access-list 100 permit ip any any
access-list 100 permit tcp any any
access-list 100 permit udp any any
access-list 111 permit ip any any
access-list 111 permit tcp any eq pop3 any
access-list 111 permit tcp any eq smtp any
access-list 111 permit tcp any eq www any
access-list 111 permit tcp any eq ftp any
access-list 111 permit tcp any eq ftp-data any
access-list 111 permit tcp any eq domain any
access-list 111 permit udp any eq 110 any
access-list 111 permit udp any eq 25 any
access-list 111 permit udp any eq 80 any
access-list 111 permit udp any eq 20 any
access-list 111 permit udp any eq 21 any
access-list 111 permit udp any eq domain any
access-list 111 permit icmp any any echo-reply
access-list 111 permit udp any any eq domain
access-list 111 deny   ip any any
dialer-list 1 protocol ip list 111
snmp-server community public RO
!
control-plane
!
!
line con 0
exec-timeout 0 0
logging synchronous
login local
transport preferred all
transport output all
stopbits 1
line vty 0 4
exec-timeout 0 0
login local
transport preferred all
transport input all
transport output all
!
scheduler max-task-time 5000
no rcapi server
!
!
end

Otaku19 · 17. September 2009

was hast am Client als DNS eingetragen ? Du könntest via DHCP dei vom ISP empfangenen DNS Adressen anch drinnen weiterverteilen, vorrausgestzt du willst intern DHCP nutzen.

ich vermute das du den Router als DNS eingetragen hast, das funktioniert nur wenn er auch als DNS konfiguriert wird

Deine lange 11er ACL ist "sinnlos"

tecker2010 · 17. September 2009

Hi,

also DNS habe ich nun über den Router laufen und mit ip dns server aktiviert. Funktioniert soweit.

Wobei es alles noch nicht so richtig rund läuft. Der Aufbau der Internet-Seiten läuft extrem langsam .. im Gegensatz zu meinem anderen Router anderen Router. Manche Seiten öffnen sich garnicht (z.B. dell.de oder mein Internet Banking) oder halt sehr langsam. Ein online Speedtest sieht jedoch gut aus also liegts wohl eher noch an den ACLs?

Ich hatte sie nochmal geändert. Mit der 111er will ich bewirken das alles bis auf net-bios etc. die Verbindung offen hält (macht das Sinn?) und die 100er soll den eingehenden Traffic regeln. Was ist der Unterschied wenn access-group 100 in auf das Dialer 1 Interface lege bzw auf Eth0 ... was ist besser/gewöhnlicher?

Habe ich noch Auffälligkeiten in der Config die da nicht sein sollten??

Vielen Dank und viele Grüße

no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
service password-encryption
!
hostname soho96
!
boot-start-marker
boot-end-marker
!
memory-size iomem 5
logging buffered 8000 debugging
enable secret 5 XXXX
!
username tecker2010 privilege 15 password 7 XXX
ip subnet-zero
!
!
ip tcp mss 1452
ip name-server 213.191.92.84
ip name-server 213.191.74.12
ip ssh time-out 60
no aaa new-model
!
!
!
!
!
!
!
interface Ethernet0
ip address 10.255.253.1 255.255.255.0
ip nat inside
no ip route-cache
!
interface BRI0
no ip address
shutdown
!
interface ATM0
no ip address
no ip route-cache
atm vc-per-vp 64
no atm ilmi-keepalive
dsl operating-mode auto
pvc 1/32
 oam-pvc 0
 pppoe-client dial-pool-number 1
!
!
interface Dialer1
description T-DSL_PPPOE_Dial_In
ip address negotiated
ip access-group 100 in
ip mtu 1492
ip nat outside
encapsulation ppp
dialer pool 1
dialer-group 1
no cdp enable
ppp chap hostname XXXX
ppp chap password 7 XXXX
ppp ipcp dns request
ppp ipcp wins request
!
no ip classless
ip route 0.0.0.0 0.0.0.0 Dialer1
ip http server
no ip http secure-server
ip dns server
!
ip nat inside source list 1 interface Dialer1 overload
!
access-list 1 permit 10.255.253.0 0.0.0.255
access-list 100 permit tcp any eq www any
access-list 100 permit udp any eq domain any
access-list 100 permit tcp any eq ftp any
access-list 100 permit tcp any eq ftp-data any
access-list 100 permit tcp any eq pop3 any
access-list 100 permit tcp any eq smtp any
access-list 100 permit tcp any eq smtp any
access-list 100 permit tcp any eq echo any
access-list 100 permit tcp any eq 443any
access-list 111 deny   udp any eq netbios-ns any
access-list 111 deny   udp any any eq netbios-ns
access-list 111 deny   udp any eq netbios-dgm any
access-list 111 deny   udp any any eq netbios-dgm
access-list 111 deny   udp any any eq syslog
access-list 111 deny   udp any any eq snmp
access-list 111 deny   udp any any eq snmptrap
access-list 111 deny   udp any any eq ntp
access-list 111 deny   tcp any eq 137 any
access-list 111 deny   tcp any eq 138 any
access-list 111 deny   tcp any eq 139 any
access-list 111 permit ip any any
dialer-list 1 protocol ip list 111
!
control-plane
!
!
line con 0
exec-timeout 0 0
logging synchronous
login local
transport preferred all
transport output all
stopbits 1
line vty 0 4
exec-timeout 0 0
login local
transport preferred all
transport input all
transport output all
!
scheduler max-task-time 5000

Anmelden

Problem bei Alice DSL mit Cisco Router SOHO96

Empfohlene Beiträge

tecker2010 10

Link zu diesem Kommentar

tecker2010 10

Link zu diesem Kommentar

Wordo 11

Link zu diesem Kommentar

tecker2010 10

Link zu diesem Kommentar

tecker2010 10

Link zu diesem Kommentar

Wordo 11

Link zu diesem Kommentar

Servidge 10

Link zu diesem Kommentar

tecker2010 10

Link zu diesem Kommentar

Wordo 11

Link zu diesem Kommentar

tecker2010 10

Link zu diesem Kommentar

Otaku19 33

Link zu diesem Kommentar

tecker2010 10

Link zu diesem Kommentar

Schreibe einen Kommentar

Menu

Aktivitäten