|
VPN-3DES-AES auf PIX515-E aktivieren!
Hallo zusammen,
mit sho version sieht man folgendes:
PIX515-E# show version
Cisco PIX Security Appliance Software Version 7.0(1)
Device Manager Version 5.0(1)
Compiled on Thu 31-Mar-05 14:37 by builders
System image file is "flash:/image.bin"
Config file at boot was "startup-config"
PIX515-E up 22 mins 13 secs
Hardware: PIX-515E, 128 MB RAM, CPU Pentium II 433 MHz
Flash E28F128J3 @ 0xfff00000, 16MB
BIOS Flash AM29F400B @ 0xfffd8000, 32KB
Encryption hardware device : VAC+ (Crypto5823 revision 0x1)
0: Ext: Ethernet0 : media index 0: irq 10
1: Ext: Ethernet1 : media index 1: irq 11
2: Ext: Ethernet2 : media index 2: irq 11
3: Ext: Ethernet3 : media index 3: irq 10
4: Ext: Ethernet4 : media index 4: irq 9
5: Ext: Ethernet5 : media index 5: irq 5
Licensed features for this platform:
Maximum Physical Interfaces : 6
Maximum VLANs : 25
Inside Hosts : Unlimited
Failover : Active/Active
VPN-DES : Enabled
VPN-3DES-AES : Disabled
Cut-through Proxy : Enabled
Guards : Enabled
URL Filtering : Enabled
Security Contexts : 2
GTP/GPRS : Disabled
VPN Peers : Unlimited
This platform has an Unrestricted (UR) license.
wie kann ich VPN-3DES-AES auf der Kiste aktivieren?
Vielen Dank im voraus
Gruß
MYOEY
|
