Servus,
ich versuche zur Zeit eine PIX 501 zu konfigurieren. Die Einwahl ins DSL mit pppoe klappt, ich kann übers CLI externe hosts anpingen. Ich bekomme aber keine Verbindung vom Client zum Internet. Die PIX scheint alles zu blocken und ich weiss nicht genau warum. Anbei die conf
Building configuration...
: Saved
:
PIX Version 6.3(5)
interface ethernet0 auto
interface ethernet1 100full
nameif ethernet0 outside security0
nameif ethernet1 inside security100
enable password ###### encrypted
passwd ########## encrypted
hostname #####
domain-name ######
fixup protocol dns maximum-length 512
fixup protocol ftp 21
fixup protocol h323 h225 1720
fixup protocol h323 ras 1718-1719
fixup protocol http 80
fixup protocol rsh 514
fixup protocol rtsp 554
fixup protocol sip 5060
fixup protocol sip udp 5060
fixup protocol skinny 2000
fixup protocol smtp 25
fixup protocol sqlnet 1521
fixup protocol tftp 69
names
name 192.168.1.10 ####
name 192.168.1.4 ####
access-list inside_access_in permit ip 192.168.1.0 255.255.255.0 any
access-list inside_outbound_nat0_acl permit ip any 192.168.1.64 255.255.255.192
access-list outside_cryptomap_dyn_20 permit ip any 192.168.1.64 255.255.255.192
pager lines 24
logging on
icmp permit any outside
icmp permit any inside
mtu outside 1500
mtu inside 1500
ip address outside pppoe setroute
ip address inside 192.168.1.30 255.255.255.0
ip audit info action alarm
ip audit attack action alarm
ip local pool ####### 192.168.1.90-192.168.1.99
pdm location ###### 255.255.255.255 inside
pdm logging informational 100
pdm history enable
arp timeout 14400
global (outside) 10 interface
nat (inside) 0 access-list inside_outbound_nat0_acl
nat (inside) 10 0.0.0.0 0.0.0.0 0 0
access-group inside_access_in in interface inside
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 rpc 0:10:00 h225 1:00:00
timeout h323 0:05:00 mgcp 0:05:00 sip 0:30:00 sip_media 0:02:00
timeout sip-disconnect 0:02:00 sip-invite 0:03:00
timeout uauth 0:05:00 absolute
aaa-server TACACS+ protocol tacacs+
aaa-server TACACS+ max-failed-attempts 3
aaa-server TACACS+ deadtime 10
aaa-server RADIUS protocol radius
aaa-server RADIUS max-failed-attempts 3
aaa-server RADIUS deadtime 10
aaa-server LOCAL protocol local
ntp server #### source inside
http server enable
http #### 255.255.255.255 inside
no snmp-server location
no snmp-server contact
snmp-server community public
no snmp-server enable traps
floodguard enable
sysopt connection permit-ipsec
crypto ipsec transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac
crypto dynamic-map outside_dyn_map 20 match address outside_cryptomap_dyn_20
crypto dynamic-map outside_dyn_map 20 set transform-set ESP-3DES-MD5
crypto map outside_map 65535 ipsec-isakmp dynamic outside_dyn_map
crypto map outside_map interface outside
isakmp enable outside
isakmp policy 20 authentication pre-share
isakmp policy 20 encryption 3des
isakmp policy 20 hash md5
isakmp policy 20 group 2
isakmp policy 20 lifetime 86400
vpngroup #### address-pool #####
vpngroup #### dns-server 192.168.1.2
vpngroup #### default-domain ##################
vpngroup #### idle-time 1800
vpngroup #### password ********
telnet timeout 5
ssh timeout 5
console timeout 0
vpdn group pppoe_group request dialout pppoe
vpdn group pppoe_group localname ###############
vpdn group pppoe_group ppp authentication chap
vpdn username ############# password *********
username #### password ############## encrypted privilege 15
terminal width 80
Cryptochecksum:c6a80e79aabe121f81657bb0d8ff7be3
: end
[OK]
besten dank schon mal im vorraus
Verbindungsprobleme PIX 501
