CISCO Router 1700

[Iceman75]

Hi, solle jetzt per Router und DSL Modem ne Internetverbindung herstellen. Bin die ANleitung von CISCO durchgegangen. Rechner hat ne IP wie die Inside Schnittstelle vom Router. DNS habe ich öffentliche Eingestetllt.

jetzt macht der router als das:


ar 1 01:06:28.663: %DIALER-6-UNBIND: Interface Vi2 unbound from profile Di1
*Mar 1 01:06:28.667: %LINK-3-UPDOWN: Interface Virtual-Access2, changed state to down
*Mar 1 01:06:48.859: Sending PADI: Interface = Ethernet0
*Mar 1 01:06:48.907: PPPoE 0: I PADO R:0011.5c26.3c31 L:0009.438d.ce31 Et0
*Mar 1 01:06:50.907: PPPOE: we've got our pado and the pado timer went off
*Mar 1 01:06:50.907: OUT PADR from PPPoE Session
*Mar 1 01:06:50.955: PPPoE 33044: I PADS R:0011.5c26.3c31 L:0009.438d.ce31 Et0
*Mar 1 01:06:50.959: IN PADS from PPPoE Session
*Mar 1 01:06:50.963: %DIALER-6-BIND: Interface Vi2 bound to profile Di1
*Mar 1 01:06:50.963: PPPoE: Virtual Access interface obtained.
*Mar 1 01:06:50.963: PPPoE : encap string prepared
*Mar 1 01:06:50.963: [0]PPPoE 33044: data path set to Virtual Acess
*Mar 1 01:06:50.967: %LINK-3-UPDOWN: Interface Virtual-Access2, changed state to up
*Mar 1 01:06:51.879: PPPoE 33044: I PADT R:0011.5c26.3c31 L:0009.438d.ce31 Et0
*Mar 1 01:06:51.879: PPPoE : Shutting down client session
*Mar 1 01:06:51.879: [0]PPPoE 33044: O PADT R:0011.5c26.3c31 L:0009.438d.ce31 Et0
*Mar 1 01:06:51.883: %DIALER-6-UNBIND: Interface Vi2 unbound from profile Di1
*Mar 1 01:06:51.887: %LINK-3-UPDOWN: Interface Virtual-Access2, changed state to down


jemand nen tipp???

mfg
ice

[Wordo]

Bitte entsprechende Config posten ...

deb pppoe ev
deb pppoe er
deb ppp neg
deb ppp auth

Das waeren die wichtigsten Debugs.

[Iceman75]

Also hier meine config:


Using 1199 out of 29688 bytes
!
version 12.4
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname Router
!
boot-start-marker
boot-end-marker
!
enable secret 5 $1$5UgE$yoToO0Ux5RRF3QI6/znNe0
!
no aaa new-model
memory-size iomem 25
!
!
ip cef
no ip domain lookup
ip auth-proxy max-nodata-conns 3
ip admission max-nodata-conns 3
!
vpdn enable
!

interface Ethernet0
ip address 172.20.100.133 255.255.0.0
half-duplex
pppoe enable group global
pppoe-client dial-pool-number 1
!
interface FastEthernet0
ip address 192.168.1.1 255.255.255.0
ip nat inside
ip virtual-reassembly
speed auto
!
interface Dialer1
ip address negotiated
ip mtu 1492
ip nat outside
ip virtual-reassembly
encapsulation ppp
dialer pool 1
dialer-group 1
ppp authentication chap callin
ppp chap hostname xxxxxxxxxxx
ppp chap password xxxxxxxxxxxx
!
ip forward-protocol nd
ip route 0.0.0.0 0.0.0.0 Dialer1
no ip http server
no ip http secure-server
!
ip nat inside source list 1 interface Dialer1 overload
!
!
access-list 1 permit 10.0.0.0 0.0.0.255
dialer-list 1 protocol ip permit
!
!
!
control-plane
!
!
line con 0
line aux 0
line vty 0 4
login
!
end


Meine IP Config

IP 192.168.1.10
SG 192.168.1.1
DNS 141.1.1.1

[Wordo]

Mach mal auf dem ETH "no ip add" und stell den Duplex auf auto. Dann waeren die Debugs noch interessant ...

[Iceman75]

DUplex auto oder full??? hab jetzt no ip add und full duplex. wie stellt man auto ein???

[Wordo]

Wenn er "duplex auto" nicht kennt lass full. Debug?

[Iceman75]

sind alle on....

oder kann man da was auslesen??? (bestimmt ne dummer antwort aber wie gesagt noch keine guten kenntnisse vorhanden :-))

[Iceman75]

jetzt rappelt er aber wie verrückt.....

[Wordo]

Du gibst "ter mon" ein, dann das Interface auf shut und wieder no shut stellen. Dann siehst du die ganzen Debugs. (mit "ter no mon" kannst debug abschalten).

[Iceman75]

Kann vom Router ins Internet pingen aber komme von der Workstation nicht is Internet.

Hier die config:

Using 1216 out of 29688 bytes
!
version 12.4
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname Router
!
boot-start-marker
boot-end-marker
!
enable secret 5 $1$5UgE$yoToO0Ux5RRF3QI6/znNe0
!
no aaa new-model
memory-size iomem 25
!
!
!
!
ip cef
no ip domain lookup
ip auth-proxy max-nodata-conns 3

Router#show conf
Using 1216 out of 29688 bytes
!
version 12.4
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname Router
!
boot-start-marker
boot-end-marker
!
enable secret 5 $1$5UgE$yoToO0Ux5RRF3QI6/znNe0
!
no aaa new-model
memory-size iomem 25
!
!
!
!
ip cef
no ip domain lookup
ip auth-proxy max-nodata-conns 3
ip admission max-nodata-conns 3
!
vpdn enable
!
!
!
!
!
!
!
!
!
!
interface Ethernet0
no ip address
full-duplex
pppoe enable group global
pppoe-client dial-pool-number 1
!
interface FastEthernet0
ip address 192.168.1.1 255.255.255.0
ip nat inside
ip virtual-reassembly
speed auto
!
interface Dialer1
ip address negotiated
ip mtu 1492
ip nat outside
ip virtual-reassembly
encapsulation ppp
dialer pool 1
dialer-group 1
ppp authentication chap callin
ppp chap hostname xxxxxxxxxxxxxxxxxx
ppp chap password 0 xxxxxxxxxxxxxxxxxx
!
interface Dialer2
no ip address
!
ip forward-protocol nd
ip route 0.0.0.0 0.0.0.0 Dialer1
no ip http server
no ip http secure-server
!
ip nat inside source list 1 interface Dialer1 overload
!
!
access-list 1 permit 0.0.0.10 255.255.255.0
dialer-list 1 protocol ip permit
!
!
!
control-plane
!
!
line con 0
line aux 0
line vty 0 4
login
!
end