836 - Dialer auf Ethernet gemappt

[Sternenkind]

Hallo allesamt!

Ich habe heute meinen neuen Internetanschluss bekommen und bin im Moment noch zu geizig für einen 876W.

Da der 836 ja nun leider kein DSL2 kann, habe ich mir gesagt "10Mbit reichen" und habe den Dialer mit externem Modem an das Ethernet Interface angebunden.

Funktioniert soweit, ist aber lahm wie Schildkröt... gefühlte 2 Mbit.

Hat das jemand schonmal *besser* gemacht und eine *schnelle* Beispiel-Konfig oder schafft der 836 sowas schlichtweg nicht vernünftig?

[Otaku19]

hm, ist nicht das neueste vom neuem, aber sollte eigentlich schon mehr schaffe, so aus dem bauch raus.
Config zeigen, was sagen die Interfacestats ?

[Sternenkind]

DSL Speed-Test: Upload und Download Geschwindigkeit bei DSL testen ergibt ziemlich genau 10 Mbit, die Antwortzeiten sind aber schlichtweg grausam...



!
version 12.3
no service pad
service tcp-keepalives-in
service tcp-keepalives-out
service timestamps debug datetime msec localtime show-timezone
service timestamps log datetime msec localtime show-timezone
service password-encryption
service sequence-numbers
!
hostname shandy
!
boot-start-marker
boot-end-marker
!
memory-size iomem 5
security authentication failure rate 3 log
logging buffered 51200 debugging
logging console critical
enable secret ***********
!
clock timezone PCTime 1
clock summer-time PCTime date Mar 30 2003 2:00 Oct 26 2003 3:00
no aaa new-model
ip subnet-zero
no ip source-route
!
!
ip dhcp excluded-address 192.168.1.1
!
!
ip tcp synwait-time 10
ip cef
ip domain name ***********
no ip bootp server
ip inspect name myfw cuseeme timeout 3600
ip inspect name myfw ftp timeout 3600
ip inspect name myfw rcmd timeout 3600
ip inspect name myfw realaudio timeout 3600
ip inspect name myfw tftp timeout 30
ip inspect name myfw udp timeout 15
ip inspect name myfw tcp timeout 3600
ip inspect name myfw h323 timeout 3600
ip inspect name myfw http
ip ips po max-events 100
ip ssh version 2
vpdn enable
!
vpdn-group 1
request-dialin
protocol pppoe
ip mtu adjust
!
vpdn-group 2
! Default PPTP VPDN group
accept-dialin
protocol pptp
virtual-template 2
!
no ftp-server write-enable
isdn switch-type basic-net3
!
!
username hauke privilege 15 password ************
!
!
no crypto isakmp ccm
!
!
!
interface Null0
no ip unreachables
!
interface Ethernet0
description Drinnen
ip address 192.168.1.1 255.255.255.0
no ip redirects
no ip unreachables
no ip proxy-arp
ip nat inside
ip virtual-reassembly
ip route-cache flow
ip tcp adjust-mss 1460
pppoe enable
pppoe-client dial-pool-number 1
no cdp enable
!
interface BRI0
T-Online
no ip address
shutdown
isdn switch-type basic-net3
no cdp enable
!
interface ATM0
no ip address
shutdown
no atm ilmi-keepalive
dsl operating-mode auto
!
interface FastEthernet1
duplex auto
speed auto
!
interface FastEthernet2
duplex auto
speed auto
!
interface FastEthernet3
duplex auto
speed auto
!
interface FastEthernet4
duplex auto
speed 10
!
interface Virtual-Template2
ip unnumbered Ethernet0
no ip redirects
no ip unreachables
no ip proxy-arp
ip route-cache flow
peer default ip address pool mypool
ppp pfc local request
ppp pfc remote apply
ppp acfc local request
ppp acfc remote apply
ppp encrypt mppe 128
ppp authentication ms-chap-v2
ppp ipcp dns 192.168.1.1
!
interface Dialer1
description $FW_OUTSIDE$
ip address negotiated
ip access-group 111 in
no ip redirects
no ip unreachables
no ip proxy-arp
ip mtu 1482
ip nat outside
ip inspect myfw out
ip virtual-reassembly
encapsulation ppp
ip route-cache flow
ip tcp adjust-mss 1352
dialer pool 1
dialer remote-name redback
dialer-group 1
ppp authentication pap callin
ppp pap sent-username ************
ppp ipcp dns request
ppp ipcp wins request

[Sternenkind]

!
ip local pool mypool 192.168.2.1 192.168.2.254
ip local pool ippool 192.168.255.1 192.168.255.254
ip classless
ip route 0.0.0.0 0.0.0.0 Dialer1
!
ip http server
ip http access-class 2
no ip http secure-server
!
ip dns server
ip nat inside source route-map dial interface Dialer1 overload
!
logging trap debugging
logging 192.168.1.2
access-list 1 permit 192.168.1.0 0.0.0.255
access-list 2 remark HTTP Access-class list
access-list 2 remark SDM_ACL Category=1
access-list 2 permit 192.168.1.0 0.0.0.255
access-list 2 permit 192.168.2.0 0.0.0.255
access-list 2 permit 192.168.3.0 0.0.0.255
access-list 2 permit 192.168.4.0 0.0.0.255
access-list 2 deny any
access-list 23 permit 192.168.1.0 0.0.0.255
access-list 100 remark SDM_ACL Category=4
access-list 100 remark IPSec Rule
access-list 100 permit ip 192.168.1.0 0.0.0.255 192.168.3.0 0.0.0.255
access-list 100 remark SDM_ACL Category=4
access-list 100 remark IPSec Rule
access-list 101 remark SDM_ACL Category=4
access-list 101 remark IPSec Rule
access-list 101 permit ip 192.168.1.0 0.0.0.255 192.168.3.0 0.0.0.255
access-list 103 permit tcp any any eq pop3
access-list 103 permit tcp any any eq smtp
access-list 110 remark SDM_ACL Category=18
access-list 110 permit ip 192.168.1.0 0.0.0.255 any
access-list 110 deny ip 192.168.1.0 0.0.0.255 192.168.2.0 0.0.0.255
access-list 111 permit icmp any any administratively-prohibited
access-list 111 permit icmp any any echo
access-list 111 permit icmp any any echo-reply
access-list 111 permit icmp any any packet-too-big
access-list 111 permit icmp any any time-exceeded
access-list 111 permit icmp any any traceroute
access-list 111 permit icmp any any unreachable
access-list 111 permit udp any eq bootps any eq bootpc
access-list 111 permit udp any eq bootps any eq bootps
access-list 111 permit udp any eq domain any
access-list 111 permit esp any any
access-list 111 permit tcp any any established
access-list 111 permit tcp any any eq 1723
access-list 111 permit udp any any eq isakmp
access-list 111 permit udp any any eq 10000
access-list 111 permit udp any any eq netbios-ns
access-list 111 permit udp any any eq netbios-dgm
access-list 111 permit gre any any
access-list 111 deny ip any any
access-list 111 permit tcp any any eq 22
access-list 111 permit udp any any eq non500-isakmp
access-list 111 permit ahp any any
access-list 111 permit tcp any any eq 1023
dialer-list 1 protocol ip permit
no cdp run
!
route-map dial permit 10
match ip address 110
match interface Dialer1
!
!
control-plane
!
banner login Welcome to SuSE Linux 8.0 (i386) - Kernel 2.4.18 (0).

!
line con 0
login local
no modem enable
transport output telnet
stopbits 1
line aux 0
login local
transport output telnet
line vty 0 4
login local
length 0
transport preferred ssh
transport input ssh
transport output ssh
!
scheduler max-task-time 5000
scheduler interval 500
ntp server 130.149.17.21 source Dialer1 prefer
no rcapi server
!
!
end

[Wordo]

ip tcp adjust-mss 1300 auf eth0

CPU waehrend des Transfers ueberwachen.

[Sternenkind]

Whyever... It's dead now, wordo

conf t
int eth 0
ip tcp adjust-mss 1300


und er sprach nie wieder TCP/IP... auch nach aus, an nicht *motz*
ebay.de Cisco 876

Oder das blaue Console Kabel auf dem Dachboden suchen wenns draußen hell ist

[Wordo]

Dann wuerd ich mal auf Flash oder RAM tippen.

[Otaku19]

erm, nach einem Neustart müsste das aber wieder verschwinden, wenn sich das Ding sofort verabschiedet hat konntest du die Konfig ja nicht mehr schreiben.