Hallo,
irgendwie bekomm ich das nicht ans Laufen. Liegt es schlicht und ergreifend daran, dass halt nur 8MB DRAM drin sind? Hab mir jetzt 8MB Original-CISCO-Speicher besorgt, der wohl kommende Woche eintreffen wird.
Wer kann mir helfen?
-----------------------------------------------------------------
Bootvorgang:
TinyROM version 1.0(3)
Fri Apr 30 18:21:41 1999
Copyright (c) 1998-1999 by cisco Systems, Inc.
All rights reserved.
POST ......... OK. 8MB DRAM, 8MB Flash.
Booting "c800-k9osy6-mw.122-15.T12.bin" ...,
Restricted Rights Legend
Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.
cisco Systems, Inc.
170 West Tasman Drive
San Jose, California 95134-1706
Cisco Internetwork Operating System Software
IOS (tm) C800 Software (C800-K9OSY6-MW), Version 12.2(15)T12, RELEASE SOFTWARE
(fc1)
Technical Support:
http://www.cisco.com/techsupport
Copyright (c) 1986-2004 by cisco Systems, Inc.
Compiled Thu 25-Mar-04 05:19 by cmong
Image text-base: 0x00195000, data-base: 0x00EE2000
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
export@cisco.com.
Cisco C803 (MPC850) processor (revision 1) with 51420K bytes of virtual memory.
Processor board ID JAD03369164 (169376338)
CPU part number 0x2100
Bridging software.
X.25 software, Version 3.0.0.
Basic Rate ISDN software, Version 1.1.
2 POTS Ports
1 Ethernet/IEEE 802.3 interface(s)
1 ISDN Basic Rate interface(s)
8M bytes of physical memory (DRAM)
8K bytes of non-volatile configuration memory
8M bytes of flash on board (4M from flash card)
Press RETURN to get started!
*Mar 1 00:00:49.792: %LINK-3-UPDOWN: Interface Ethernet0, changed state to up
*Mar 1 00:00:50.792: %LINEPROTO-5-UPDOWN: Line protocol on Interface Ethernet0,
changed state to up
*Mar 1 00:00:54.844: %LINK-5-CHANGED: Interface BRI0, changed state to administ
ratively down
*Mar 1 00:00:55.540: %LINK-5-CHANGED: Interface Ethernet0, changed state to adm
inistratively down
*Mar 1 00:00:55.860: %LINEPROTO-5-UPDOWN: Line protocol on Interface BRI0, chan
ged state to down
*Mar 1 00:00:56.692: %LINEPROTO-5-UPDOWN: Line protocol on Interface Ethernet0,
changed state to down
*Mar 1 00:00:58.980: %SYS-5-CONFIG_I: Configured from memory by console
*Mar 1 00:00:59.180: %SYS-5-RESTART: System restarted --
Cisco Internetwork Operating System Software
IOS (tm) C800 Software (C800-K9OSY6-MW), Version 12.2(15)T12, RELEASE SOFTWARE
(fc1)
Technical Support:
http://www.cisco.com/techsupport
Copyright (c) 1986-2004 by cisco Systems, Inc.
Compiled Thu 25-Mar-04 05:19 by cmong
*Mar 1 00:00:59.212: %SNMP-5-COLDSTART: SNMP agent on host Router is undergoing
a cold start
*Mar 1 00:01:00.888: %LINK-3-UPDOWN: Interface Virtual-Access1, changed state t
o up
*Mar 1 00:01:01.884: %LINEPROTO-5-UPDOWN: Line protocol on Interface Virtual-Ac
cess1, changed state to up
-----------------------------------------------------------------
Und hier die Config:
!
version 12.2
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
service password-encryption
!
hostname Router
!
boot system flash c800-k9osy6-mw.122-15.T12.bin
logging queue-limit 100
logging buffered 64000 debugging
enable secret xxxxx
!
!
!
ip subnet-zero
ip name-server 194.25.2.129
!
vpdn enable
!
vpdn-group 1
request-dialin
protocol pppoe
ip mtu adjust
!
isdn switch-type basic-net3
isdn voice-call-failure 0
!
!
!
!
!
!
interface Ethernet0
ip address 192.168.0.1 255.255.255.0
ip nat inside
ip tcp adjust-mss 1452
pppoe enable
pppoe-client dial-pool-number 1
no keepalive
!
interface BRI0
no ip address
shutdown
isdn switch-type basic-net3
!
interface Dialer1
description T-DSL - Anschluss
ip address negotiated
ip mtu 1454
ip nat outside
encapsulation ppp
ip tcp adjust-mss 1452
no ip mroute-cache
dialer pool 1
dialer-group 1
no cdp enable
ppp authentication pap callin
ppp pap sent-username xxxxx password xxxxx
!
ip nat inside source list 1 interface Dialer1 overload
ip classless
ip route 0.0.0.0 0.0.0.0 Dialer1
no ip http server
no ip http secure-server
!
!
access-list 1 permit any
dialer-list 1 protocol ip permit
!
!
line con 0
stopbits 1
line vty 0 4
password 7 xxxxx
login
!
no rcapi server
!
!
end
Gruß EvilFlare
